DATA SHEET
SKY67159-396LF: 200 to 3800 MHz Broadband
Low-Noise Amplifier
Applications
FDD and TDD 2G/3G/4G LTE systems
Receive LNA for micro-cell, macro-cell, and small-cell base
stations
Active antenna array and massive MIMO
Land mobile radios and military communications
Low-noise broadband gain block and driver amplifier
Features
Excellent broadband flat gain performance
Low noise figure
High IP3 performance over voltage
Single matching circuit for 200 to 3800 MHz
Adjustable supply current from 30 to 100 mA
Flexible bias voltage: 3 to 5 V
Fast rise/fall time ENABLE function suitable for TDD application
Temperature and process-stable active bias up to +105 C
Miniature DFN (8-pin, 2 x 2 mm) package
(MSL1 @ 260 C per JEDEC J-STD-020)
Figure 1. SKY67159-396LF Block Diagram
Description
The SKY67159-396LF is an ultra-broadband low-noise amplifier
with superior gain flatness and exceptional linearity.
The compact 2 x 2 mm, 8-pin Dual Flat No Lead packaged LNA is
designed for FDD and TDD 2G/3G/4G LTE small-cell base stations
operating from 200 to 3800 MHz.
The internal active bias circuitry provides stable performance over
temperature and process variation. The device offers the ability to
externally adjust supply current.
A functional block diagram is shown in Figure 1. The pin
configuration and package are shown in Figure 2. Signal pin
assignments and functional pin descriptions are provided in
Table 1.
Figure 2. SKY67159-396LF Pinout
(Top View)
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
203397F • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • May 2, 2019
1
DATA SHEET • SKY67159-396LF: BROADBAND LOW-NOISE AMPLIFIER
Table 1. SKY67159-396LF Signal Descriptions
Pin
Name
Description
Pin
Name
Description
No connection. May be left open, connected to
VDD, or connected to ground with no change in
performance.
5
N/C
No connection. May be connected to ground with
no change in performance.
RFIN
RF input. DC blocking capacitor required.
6
ENABLE
Enable pin. Active low = amplifier ON state
3
VBIAS
Bias voltage for input gate. External resistor sets
current consumption.
7
RFOUT/VDD
RF output. Apply VDD through RF choke inductor.
DC blocking capacitor required.
4
N/C
No connection. May be connected to ground with
no change in performance.
8
N/C
No connection. May be connected to ground with
no change in performance.
1
N/C
2
Electrical and Mechanical Specifications
The absolute maximum ratings of the SKY67159-396LF are
provided in Table 2. Electrical specifications are provided in
Tables 3 through 5.
Typical performance characteristics are illustrated in Figures 3
through 35.
Table 2. SKY67159-396LF Absolute Maximum Ratings1
Parameter
Symbol
Minimum
Maximum
Units
Supply voltage
VDD
5.5
V
Quiescent supply current
ICQ
100
mA
RF input power (C/W)
PIN
+21
dBm
Storage temperature
TSTG
-40
+150
C
Operating temperature
TA
-40
+105
C
Junction temperature
TJ
+150
C
Electrostatic discharge:
ESD
1000
250
30
V
V
V
Charged Device Model (CDM), Class 4
Human Body Model (HBM), Class 1A
Machine Model (MM), Class A
1 Exposure to maximum rating conditions for extended periods may reduce device reliability. There is no damage to device with only one parameter set at the limit and all other parameters
set at or below their nominal value. Exceeding any of the limits listed here may result in permanent damage to the device.
ESD HANDLING: Although this device is designed to be as robust as possible, electrostatic discharge (ESD) can damage this device.
This device must be protected at all times from ESD when handling or transporting. Static charges may easily produce
potentials of several kilovolts on the human body or equipment, which can discharge without detection.
Industry-standard ESD handling precautions should be used at all times.
Table 3. SKY67159-396LF Electrical Specifications: Thermal Data1
(VDD = 3.3 V, Enable = GND, TA = +25 C, PIN = -20 dBm, Characteristic Impedance [ZO] = 50 Ω, Unless Otherwise Noted)
Parameter
Symbol
Test Condition
JC
Thermal resistance
Channel temperature @ +85 °C reference
(package heat slug)
VDD = 3.3 V, ICQ = 45 mA, no RF
applied, dissipated power = 0.15 W
Min
Typical
Max
40
°C/W
90.9
°C
1 Performance is guaranteed only under the conditions listed in this table.
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
2
Units
May 2, 2019 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 203397E
DATA SHEET • SKY67159-396LF: BROADBAND LOW-NOISE AMPLIFIER
Table 4. SKY67159-396LF Electrical Specifications: 700 to 2700 MHz Optimized Tuning1
(VDD = 3.3 V, Enable = GND, TA = +25 C, PIN = -20 dBm, Characteristic Impedance [ZO] = 50 Ω, f = 2700 MHz, Unless Otherwise Noted)
Parameter
Symbol
Test Condition
Min
Typical
Max
Units
RF Specifications
Noise figure2
Small signal gain
Input return loss
Output return loss
Reverse isolation
Third order input intercept point
Third order output intercept point
NF
@ 700 MHz
@ 1200 MHz
@ 2100 MHz
@ 2700 MHz
0.95
0.97
0.98
1
dB
dB
dB
dB
|S21|
@ 700 MHz
@ 1200 MHz
@ 2100 MHz
@ 2700 MHz
17.8
17.5
17.3
17.1
dB
dB
dB
dB
|S11|
@ 700 MHz
@ 1200 MHz
@ 2100 MHz
@ 2700 MHz
18
20
20
18
dB
dB
dB
dB
|S22|
@ 700 MHz
@ 1200 MHz
@ 2100 MHz
@ 2700 MHz
22
19
19
22
dB
dB
dB
dB
|S12|
@ 700 MHz
@ 1200 MHz
@ 2100 MHz
@ 2700 MHz
22
22
22
23
dB
dB
dB
dB
IIP3
OIP3
@ 700 MHz, Δf = 1 MHz,
PIN = -20 dBm/tone
12
14.2
dBm
@ 2700 MHz, Δf = 1 MHz,
PIN = -20 dBm/tone
10
12.4
dBm
@ 700 MHz, Δf = 1 MHz,
PIN = -20 dBm/tone
30
32
dBm
@ 2700 MHz, Δf = 1 MHz,
PIN = -20 dBm/tone
27.5
29.5
dBm
1 dB input compression point
IP1dB
@ 700 MHz
@ 2700 MHz
-1
-2
+1
0
dBm
dBm
1 dB output compression point
OP1dB
@ 700 MHz
@ 2700 MHz
+16
+14
+18
+16
dBm
dBm
DC Specifications
Supply voltage
VDD
Quiescent current
IDD
Set with external resistor
(RBIAS = 4.7 kΩ)
3.3
V
45
mA
A
Bias current
IBIAS
Enable voltage:
Gain mode
Power-down mode
VEN
Enable rise time3
tON
@ 2700 MHz
400
ns
Enable fall time3
tOFF
@ 2700 MHz
150
ns
0.2
5.5
0
1.5
V
V
1 Performance is guaranteed only under the conditions listed in this table.
2 Connector and board loss are de-embedded.
3 Tested with a 100 kHz square wave, 1000 pF capacitance-to-ground on the ENABLE pin. Switching time can be improved by reducing the value of, or eliminating, the 1000 pF capacitor on
pin 6 (component M17 in Figure 19).
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
203397F • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • May 2, 2019
3
DATA SHEET • SKY67159-396LF: BROADBAND LOW-NOISE AMPLIFIER
Table 5. SKY67159-396LF Electrical Specifications: 3400 to 3800 MHz Optimized Tuning1
(VDD = +3.3 V, ENABLE = LOW, ICQ = 45 mA, TOP = +25 °C, PIN = -20 dBm, Optimized for 3400 to 3800 MHz Operation,
Unless Otherwise Noted)
Parameter
Symbol
Test Condition
Min
Typ
Max
Units
RF Specifications
Noise figure
NF
@ 3400 MHz
@ 3600 MHz
@ 3800 MHz
1.2
1.25
1.3
dB
dB
dB
Small signal gain
|S21|
@ 3400 MHz
@ 3600 MHz
@ 3800 MHz
16.8
16.7
16.5
dB
dB
dB
Input return loss
|S11|
@ 3400 MHz
@ 3600 MHz
@ 3800 MHz
24
30
30
dB
dB
dB
Output return loss
|S22|
@ 3400 MHz
@ 3600 MHz
@ 3800 MHz
22
21
22
dB
dB
dB
Reverse isolation
|S12|
@ 3400 MHz
@ 3600 MHz
@ 3800 MHz
23
23
23
dB
dB
dB
RF Specifications
Third order input intercept point
Third order output intercept point
IIP3
OIP3
1 dB input compression point
IP1dB
1 dB output compression point
OP1dB
@ 3400 MHz, Δf = 1 MHz,
PIN = -20 dBm/tone
9
11.4
dBm
@ 3800 MHz, Δf = 1 MHz,
PIN = -20 dBm/tone
8
10.9
dBm
@ 3400 MHz, Δf = 1 MHz,
PIN = -20 dBm/tone
25
28.2
dBm
@ 3800 MHz, Δf = 1 MHz,
PIN = -20 dBm/tone
24
27.4
dBm
@ 3400 MHz
-3
-1
dBm
@ 3800 MHz
-3
-1
dBm
@ 3400 MHz
12
14.8
dBm
@ 3800 MHz
12
14.5
dBm
1 Verified by characterization.
Table 6. SKY67159-396LF Electrical Specifications: 5G Driver Optimized Tuning1
(VDD = +5 V, ENABLE = LOW, ICQ = 45 mA, TOP = +25 °C, PIN = -20 dBm, Optimized for 3400 to 5000 MHz Operation,
Unless Otherwise Noted)
Parameter
Symbol
Test Condition
Min
Typ
Max
NF
4400 MHz
1.4
dB
Small signal gain
S21
4400 MHz
14.5
dB
Input return loss
S11
4400 MHz
-15
dB
Output return loss
S22
4400 MHz
-15
dB
Isolation
S12
4400 MHz
-25
dB
Third order output intercept point
OIP3
4400 MHz
19
dBm
4400 MHz
16
dBm
1 dB output compression point
OP1dB
1 Verified by characterization.
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
4
Units
Noise figure
May 2, 2019 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 203397E
DATA SHEET • SKY67159-396LF: BROADBAND LOW-NOISE AMPLIFIER
Typical Performance Characteristics, 700 to 2700 MHz
(VDD = 3.3 V, Enable = GND, ICQ = 45 mA, TA = +25 C, PIN = -20 dBm, Characteristic Impedance [Zo] = 50 Ω, Unless Otherwise Noted)
Figure 3. Evaluation Board NF vs Frequency over Temperature
Figure 4. Narrow Band Gain vs Frequency over Temperature
Figure 5. Broadband Gain vs Frequency over
Temperature
Figure 6. Narrowband Input Return Loss vs Frequency over
Temperature
Figure 7. Broadband Input Return Loss vs Frequency over
Temperature
Figure 8. Narrowband Reverse Isolation vs Frequency over
Temperature
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
203397F • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • May 2, 2019
5
DATA SHEET • SKY67159-396LF: BROADBAND LOW-NOISE AMPLIFIER
Figure 9. Broadband Reverse Isolation vs Frequency over
Temperature
Figure 11. Broadband Output Return Loss vs Frequency
over Temperature
Figure 13. Stability Factor (2) vs Frequency over Temperature
Figure 10. Narrowband Output Return Loss vs Frequency
over Temperature
Figure 12. Stability Factor (1) vs Frequency over Temperature
Figure 14. Evaluation Board Noise Figure vs Quiescent Current
over Frequency
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
6
May 2, 2019 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 203397E
DATA SHEET • SKY67159-396LF: BROADBAND LOW-NOISE AMPLIFIER
Figure 15. OIP3 vs Input Power over Temperature
(@ 2700 MHz, 1 MHz Spacing)
Figure 16. OIP3 vs Quiescent Current over Frequency
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
203397F • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • May 2, 2019
7
DATA SHEET • SKY67159-396LF: BROADBAND LOW-NOISE AMPLIFIER
Typical Performance Characteristics, 3400 to 3800 MHz Optimized Tuning
(VDD = 3.3 V, Enable = GND, ICQ = 45 mA, TA = +25 °C, PIN = -20 dBm, Characteristic Impedance [Zo] = 50 Ω, Unless
Otherwise Noted)
Figure 17. Broadband Input Return Loss vs Frequency over
Temperature
Figure 18. Narrowband Input Return Loss vs Frequency over
Temperature
Figure 19. Broadband Gain vs Frequency over
Temperature
Figure 20. Narrow Band Gain vs Frequency over Temperature
Figure 21. Broadband Reverse Isolation vs Frequency over
Temperature
Figure 22. Narrowband Reverse Isolation vs Frequency over
Temperature
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
8
May 2, 2019 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 203397E
DATA SHEET • SKY67159-396LF: BROADBAND LOW-NOISE AMPLIFIER
Figure 23. Broadband Output Return Loss vs Frequency
over Temperature
Figure 24. Narrowband Output Return Loss vs Frequency
over Temperature
Figure 25. Noise Figure vs Frequency
Figure 26. Stability Factor u1 vs Frequency
Figure 27. Stability Factor u2 vs Frequency
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
203397F • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • May 2, 2019
9
DATA SHEET • SKY67159-396LF: BROADBAND LOW-NOISE AMPLIFIER
Typical Performance Characteristics, 5G Driver Optimized Tuning
(VDD = 5 V, Enable = Low, ICQ = 45 mA, TA = +25 C, PIN = -20 dBm, Optimized for 3400 to 5000 MHz, Unless Otherwise Noted)
Figure 28. Evaluation Board NF vs Frequency over Temperature
Figure 29. Gain vs Frequency over Temperature
Figure 30. Gain vs Frequency over Temperature
Figure 31. Input Return Loss vs Frequency over Temperature
Figure 32. Output Return Loss vs Frequency over Temperature
Figure 33. Isolation vs Frequency over Temperature
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
10
May 2, 2019 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 203397E
DATA SHEET • SKY67159-396LF: BROADBAND LOW-NOISE AMPLIFIER
Figure 34. OP1dB vs Frequency over Temperature
Figure 35. OIP3 vs Frequency over Temperature
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
203397F • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • May 2, 2019
11
DATA SHEET • SKY67159-396LF: BROADBAND LOW-NOISE AMPLIFIER
Evaluation Board Description
Package and Handling Information
The SKY67159-396LF Evaluation Board is used to test the
performance of the SKY67159-396LF LNA.
Instructions on the shipping container label regarding exposure to
moisture after the container seal is broken must be followed.
Otherwise, problems related to moisture absorption may occur
when the part is subjected to high temperature during solder
assembly.
An assembly drawing for the Evaluation Board is shown in
Figure 36. The layer detail is provided in Figure 37. An Evaluation
Board schematic (optimized for 700 to 2700 MHz) diagram is
provided in Figure 38. Table 6 provides the Bill of Materials (BOM)
list for the optimized frequency band (700 to 2700 MHz). An
Evaluation Board schematic (optimized for 3400 to 3800 MHz)
diagram is provided in Figure 39. Table 8 provides the Bill of
Materials (BOM) list for the optimized frequency band (3400 to
5000 MHz). Table 9 provides the Bill of Materials (BOM) list for the
optimized frequency band (3400 to 3800 MHz).
The SKY67159-396LF is rated to Moisture Sensitivity Level 1
(MSL1) at 260 C. It can be used for lead or lead-free soldering.
For additional information, refer to the Skyworks Application Note,
Solder Reflow Information, document number 200164.
Care must be taken when attaching this product, whether it is
done manually or in a production solder reflow environment.
Production quantities of this product are shipped in a standard
tape and reel format.
Package Dimensions
The PCB layout footprint for the SKY67159-396LF is provided in
Figure 40. Typical part markings are shown in Figure 41. Package
dimensions are shown in Figure 42, and tape and reel dimensions
are provided in Figure 43.
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
12
May 2, 2019 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 203397E
DATA SHEET • SKY67159-396LF: BROADBAND LOW-NOISE AMPLIFIER
Figure 36. SKY67159-396LF Evaluation Board Assembly Diagram
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
203397F • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • May 2, 2019
13
DATA SHEET • SKY67159-396LF: BROADBAND LOW-NOISE AMPLIFIER
Figure 37. Layer Detail Physical Characteristics
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
14
May 2, 2019 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 203397E
DATA SHEET • SKY67159-396LF: BROADBAND LOW-NOISE AMPLIFIER
Figure 38. SKY67159-396LF Evaluation Board Schematic (Optimized for 700 to 2700 MHz)
Table 7. SKY67159-396LF Evaluation Board Bill of Materials (700 to 2700 MHz)
Component
Description
Value
Size
Manufacturer
Mfr Part Number
M1
Capacitor
20 pF
0402
Murata GJM
GJM1555C1H200JB01
M3
Inductor
1 nH
0402
Coilcraft HP
0402HP-1N0XJL
M4
Inductor
30 nH
0402
Coilcraft HP
0402HP-30NX_L_
M5, M9, M12
Capacitor
100 pF
0402
Murata GRM
GRM1555C1H101JA01D
M6 (RBIAS)
Resistor
4.7 kΩ
0402
Panasonic
ERJ-2RKF4701X
M10
Inductor
36 nH
0402
Coilcraft HP
0402HP-36NX_L_
M14, M16
Jumper
0Ω
0402
Panasonic
ERJ-2GE0R00X
M2, M7, M8, M11, M13, M15, M171
DNP
1 M17 is optional. It is only needed if the control signal is noisy.
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
203397F • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • May 2, 2019
15
DATA SHEET • SKY67159-396LF: BROADBAND LOW-NOISE AMPLIFIER
Table 8. SKY67159-396LF Evaluation Board Bill of Materials (3400 to 5000 MHz)
Component
M1
Description
Value
Size
Manufacturer
MuRata
Mfr Part Number
Capacitor
20p
402
GJM1555C1H200GB01
M2
Capacitor
.5p
402
MuRata
GJM1555C1HR50WB01
M3
Resistor
0 ohm
402
NA
NA
M4
Resistor
1k ohm
402
NA
NA
M5
Capacitor
100p
402
MuRata
GRM1555C1H101JA01
M6
Resistor
8.2k ohm
402
NA
NA
M8
Capacitor
.01u
402
MuRata
GRM1555R71H103KA88
M9
Capacitor
1000p
402
MuRata
GRM1555C1H100JZ01
M10
Inductor
9.1n
402
MuRata
LQG15HS9N1J02
M12
Inductor
1.5n
402
MuRata
LQP15MN1N5B02
M13
Capacitor
.5p
402
MuRata
GJM1555C1HR50WB01
M14
Capacitor
100p
402
MuRata
GRM1555C1H101JA01
M16
Resistor
0 ohm
402
NA
NA
M17
Capacitor
100p
402
MuRata
GRM1555C1H101JA01
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
16
May 2, 2019 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 203397E
DATA SHEET • SKY67159-396LF: BROADBAND LOW-NOISE AMPLIFIER
Figure 39. SKY67159-396LF Evaluation Board Schematic (Optimized for 3400 to 3800 MHz)
Table 9. SKY67159-396LF Evaluation Board Bill of Materials (3400 to 3800 MHz)
Component
Description
Value
Size
Manufacturer
Part Number
M1
Capacitor
20 pF
0402
Murata GJM
GJM1555C1H200JB01
M4
Inductor
3.3 nH
0402
Coilcraft HP
0402HP-3N3X_L_
M5, M9, M12
Capacitor
100 pF
0402
Murata GRM
GRM1555C1H101JA01D
M6 (RBIAS)
Resistor
4.7 kΩ
0402
Panasonic
ERJ-2RKF4701X
M10
Inductor
11 nH
0402
Coilcraft HP
0402HP-11NX_L_
M3, M14, M16
Jumper
0Ω
0402
Panasonic
ERJ-2GE0R00X
M2, M7, M8, M11, M13, M15, M171
DNP
1 M17 is optional. It is only needed if the control signal is noisy.
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
203397F • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • May 2, 2019
17
DATA SHEET • SKY67159-396LF: BROADBAND LOW-NOISE AMPLIFIER
Figure 40. SKY67159-396LF PCB Layout Footprint
(Top View)
Figure 41. Typical Part Markings
(Top View)
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
18
May 2, 2019 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 203397E
DATA SHEET • SKY67159-396LF: BROADBAND LOW-NOISE AMPLIFIER
Figure 42. SKY67159-396LF Package Dimensions
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
19
May 2, 2019 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 203397E
DATA SHEET • SKY67159-396LF: BROADBAND LOW-NOISE AMPLIFIER
Figure 43. SKY67159-396LF Tape and Reel Dimensions
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
20
May 2, 2019 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 203397E
DATA SHEET • SKY67159-396LF: BROADBAND LOW-NOISE AMPLIFIER
Ordering Information
Part Number
SKY67159-396LF LNA
Product Description
200 to 3800 MHz Broadband Low-Noise Amplifier
Evaluation Board Part Number
SKY67159-396EK1 (700 to 2700 MHz low frequency range)
SKY67159-396EK2 (3400 to 3800 MHz next frequency range)
Copyright © 2015, 2017-2019 Skyworks Solutions, Inc. All Rights Reserved.
Information in this document is provided in connection with Skyworks Solutions, Inc. (“Skyworks”) products or services. These materials, including the information contained herein, are provided by
Skyworks as a service to its customers and may be used for informational purposes only by the customer. Skyworks assumes no responsibility for errors or omissions in these materials or the
information contained herein. Skyworks may change its documentation, products, services, specifications or product descriptions at any time, without notice. Skyworks makes no commitment to
update the materials or information and shall have no responsibility whatsoever for conflicts, incompatibilities, or other difficulties arising from any future changes.
No license, whether express, implied, by estoppel or otherwise, is granted to any intellectual property rights by this document. Skyworks assumes no liability for any materials, products or
information provided hereunder, including the sale, distribution, reproduction or use of Skyworks products, information or materials, except as may be provided in Skyworks Terms and Conditions
of Sale.
THE MATERIALS, PRODUCTS AND INFORMATION ARE PROVIDED “AS IS” WITHOUT WARRANTY OF ANY KIND, WHETHER EXPRESS, IMPLIED, STATUTORY, OR OTHERWISE, INCLUDING FITNESS FOR A
PARTICULAR PURPOSE OR USE, MERCHANTABILITY, PERFORMANCE, QUALITY OR NON-INFRINGEMENT OF ANY INTELLECTUAL PROPERTY RIGHT; ALL SUCH WARRANTIES ARE HEREBY EXPRESSLY
DISCLAIMED. SKYWORKS DOES NOT WARRANT THE ACCURACY OR COMPLETENESS OF THE INFORMATION, TEXT, GRAPHICS OR OTHER ITEMS CONTAINED WITHIN THESE MATERIALS. SKYWORKS
SHALL NOT BE LIABLE FOR ANY DAMAGES, INCLUDING BUT NOT LIMITED TO ANY SPECIAL, INDIRECT, INCIDENTAL, STATUTORY, OR CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION,
LOST REVENUES OR LOST PROFITS THAT MAY RESULT FROM THE USE OF THE MATERIALS OR INFORMATION, WHETHER OR NOT THE RECIPIENT OF MATERIALS HAS BEEN ADVISED OF THE
POSSIBILITY OF SUCH DAMAGE.
Skyworks products are not intended for use in medical, lifesaving or life-sustaining applications, or other equipment in which the failure of the Skyworks products could lead to personal injury,
death, physical or environmental damage. Skyworks customers using or selling Skyworks products for use in such applications do so at their own risk and agree to fully indemnify Skyworks for any
damages resulting from such improper use or sale.
Customers are responsible for their products and applications using Skyworks products, which may deviate from published specifications as a result of design defects, errors, or operation of
products outside of published parameters or design specifications. Customers should include design and operating safeguards to minimize these and other risks. Skyworks assumes no liability for
applications assistance, customer product design, or damage to any equipment resulting from the use of Skyworks products outside of stated published specifications or parameters.
Skyworks and the Skyworks symbol are trademarks or registered trademarks of Skyworks Solutions, Inc. or its subsidiaries in the United States and other countries. Third-party brands and names
are for identification purposes only, and are the property of their respective owners. Additional information, including relevant terms and conditions, posted at www.skyworksinc.com, are
incorporated by reference.
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
203397F • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • May 2, 2019
21
工商网监
湘ICP备2023018690号
