SKY73087-11

DATA SHEET SKY73087-11: 700 – 1000 MHz High Gain and Linearity Diversity Downconversion Mixer Applications Description • 2G/3G base station transceivers: − GSM/EDGE, CDMA, UMTS/WCDMA The SKY73087-11 is a fully integrated diversity mixer that includes Local Oscillator (LO) drivers, an LO switch, high linearity mixers, and large dynamic range Intermediate Frequency (IF) amplifiers. Low loss RF baluns have also been included to reduce design complications and lower system cost. • Land mobile radio • High performance radio links Features • Operating frequency range: 700 to 1000 MHz • IF frequency range: 100 to 500 MHz • Conversion gain: 8.8 dB • Input IP3: +25.3 dBm • Output IP3: +34.1 dBm • Noise figure: 10.7 dB • Integrated LO drivers • Integrated low loss RF baluns • High linearity IF amplifiers The SKY73087-11 features an input IP3 of +25.3 dBm and a Noise Figure (NF) of 10.7 dB, making the device an ideal solution for high dynamic range systems such as 2G/3G base station receivers. The LO switch provides more than 57 dB of isolation between LO inputs and supports the switching time required for GSM/EDGE base stations. The SKY73087-11 is manufactured using a robust silicon BiCMOS process and has been designed for optimum long-term reliability. The SKY73087-11 diversity downconversion mixer is provided in a compact, 36-pin Multi-Chip Module (MCM). A functional block diagram is shown in Figure 1. The pin configuration and package are shown in Figure 2. Signal pin assignments and functional pin descriptions are provided in Table 1. • On-chip SPDT LO switch (greater than 60 dB LO-to-LO isolation) • Small, MCM (36-pin, 6 x 6 mm) package (MSL3, 260 °C per JEDEC J-STD-020) Figure 1. SKY73087-11 Block Diagram Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com 201043H • Skyworks Proprietary and Confidential Information • Products and Product Information are Subject to Change Without Notice • April 7, 2011 1 DATA SHEET • SKY73087-11 DOWNCONVERSION MIXER Figure 2. SKY73087-11 Pinout – 36-Pin MCM (Top View) Table 1. SKY73087-11 Signal Descriptions Pin # Name Description Pin # 19 Name LO1 Description 1 RFA RF channel A input Local oscillator #1 input 2 N/C No connect 20 GND Ground 3 GND Ground 21 VCC_LOIN DC supply, +5 V 4 VCC_LO DC supply, +5 V 22 GND Ground 5 GND Ground 23 LO_SEL Local oscillator switch select 6 VCC_LO DC supply, +5 V 24 GND Ground 7 GND Ground 25 GND Ground 8 N/C No connect 26 GND Ground 9 RFB RF channel B input 27 LO2 Local oscillator #2 input 10 VCC_RFB DC supply, +5 V 28 N/C No connect 11 N/C No connect 29 RIFA IF channel A bias control 12 GND Ground 30 VCC_IFA DC supply, +5 V 13 IFB+ IF channel B positive output 31 N/C No connect 14 IFB– IF channel B negative output 32 IFA+ IF channel A positive output 15 N/C No connect 33 IFA– IF channel A negative output 16 VCC_IFB DC supply, +5 V 34 GND Ground 17 RIFB IF channel B bias control 35 N/C No connect 18 N/C No connect 36 VCC_RFA DC supply, +5 V Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com 2 April 7, 2011 • Skyworks Proprietary and Confidential Information • Products and Product Information are Subject to Change Without Notice • 201043H DATA SHEET • SKY73087-11 DOWNCONVERSION MIXER Functional Description The SKY73087-11 is a high gain diversity mixer, optimized for base station receiver applications. The device consists of two diversity channels, each consisting of a low loss RF balun, high linearity passive mixer, and a low noise IF amplifier. LO amplifiers are also included that allow the SKY73087-11 to connect directly to the output of a Voltage Controlled Oscillator (VCO). This eliminates the extra gain stages needed by most discrete passive mixers. A Single Pole, Double Throw (SPDT) switch has been included to select between two different LO inputs for frequency hopping applications (i.e., GSM). RF Baluns and Passive Mixer The RF baluns provide a single ended input, which can easily be matched to 50 Ω using a simple matching circuit. The RF baluns offer very low loss and excellent amplitude and phase balance. The high linearity mixer is a passive, double balanced mixer that provides a very low insertion loss, and excellent 3rd Order Input Insertion Point (IIP3) and linearity performance. Additionally, the balanced nature of the mixer provides for excellent port-to-port isolation. LO Buffers and SPDT LO Switch The LO buffers allow the input power of the SKY73087-11 to be programmed in the range of –6 to +6 dBm. The LO section has been optimized for high-side LO injection. However, the LO can be driven over a wide frequency range with only slight degradation in performance. A high isolation SPDT switch allows the SKY73087-11 to be used for frequency hopping applications. This switch provides greater than 57 dB of LO1 to LO2 isolation: LO_SEL Logic: State: High LO1 enabled Low LO2 enabled For applications that do not require frequency hopping, LO_SEL is fixed to one state and the appropriate LO input is used. IF Amplifier The SKY73087-11 includes high dynamic range IF amplifiers that follow the passive mixers in the signal path. The outputs require a supply voltage connection using inductive chokes. These choke inductors should be high-Q and have the ability to handle 200 mA or greater. A simple matching network allows the output ports to be matched to a balanced 200 Ω impedance. The IF amplifiers are optimized for IF frequencies between 100 and 500 MHz. The IF amplifiers can be operated outside of this range, but with a slight degradation in performance. Electrical and Mechanical Specifications The absolute maximum ratings of the SKY73087-11 are provided in Table 2. The recommended operating conditions are specified in Table 3 and electrical specifications are provided in Table 4. Spurious performance measurements for the 3GPP bands #20, 8, and 5 are listed in Tables 5, 6, and 7, respectively. Typical performance characteristics of the SKY73087-11 are illustrated in Figures 3 through 43. Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com 201043H • Skyworks Proprietary and Confidential Information • Products and Product Information are Subject to Change Without Notice • April 7, 2011 3 DATA SHEET • SKY73087-11 DOWNCONVERSION MIXER Table 2. SKY73087-11 Absolute Maximum Ratings Parameter Symbol Supply voltage, +5 V (VCC_LO, VCC_RFB, VCC_IFB, VCC_LOIN, VCC_IFA, VCC_RFA) VCC Supply current ICC RF input power PRF LO input power PLO Operating case temperature TC Junction temperature TJ Storage case temperature TSTG Minimum Typical Maximum Units 4.5 5.0 5.5 V 370 430 mA +20 dBm 0 +20 dBm +85 °C +150 °C +150 °C –40 –40 Notes: Exposure to maximum rating conditions for extended periods may reduce device reliability. There is no damage to device with only one parameter set at the limit and all other parameters set at or below their nominal value. Exceeding any of the limits listed here may result in permanent damage to the device. Nominal thermal resistance (junction to center ground pad) is 5.1 °C/W. CAUTION: Although this device is designed to be as robust as possible, Electrostatic Discharge (ESD) can damage this device. This device must be protected at all times from ESD. Static charges may easily produce potentials of several kilovolts on the human body or equipment, which can discharge without detection. Industry-standard ESD precautions should be used at all times. Table 3. SKY73087-11 Recommended Operating Conditions (Note 1) Parameter Symbol Minimum Typical Maximum Units 4.75 5.00 5.25 V 700 1000 MHz FLO 800 1500 MHz FIF 100 500 MHz LO input power PLO –6 +6 dBm LO select logic: high low LO_SELH LO_SELL 2.2 0.8 V V Operating case temperature TC –40 +85 °C Supply voltage, +5 V ((VCC_LO, VCC_RFB, VCC_IFB, VCC_LOIN, VCC_IFA, VCC_RFA) VCC Supply current ICC RF frequency range FRF LO frequency range (Note 1) IF frequency range 370 0 mA Note 1: The SKY73087-11 has been optimized for high-side LO injection. However, the LO can be used outside of the specified frequency range with degraded performance. Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com 4 April 7, 2011 • Skyworks Proprietary and Confidential Information • Products and Product Information are Subject to Change Without Notice • 201043H DATA SHEET • SKY73087-11 DOWNCONVERSION MIXER Table 4. SKY73087-11 Electrical Specifications (Note 1) (Voltage Supply = +5 V, TC = +25 °C, LO = 0 dBm, RF Frequency = 900 MHz, IF Frequency = 350 MHz, LO Frequency = 1250 MHz, Unless Otherwise Noted) Parameter Symbol Test Condition Min Typical 8.3 8.8 Max Units dB Conversion gain G FRF = 824 to 940 MHz, VCC = 4.75 to 5.25 V, PLO = –3 to +3 dBm Noise Figure NF FRF = 900 MHz 10.7 12.2 dB Noise Figure with a blocker signal NFBLK Blocking signal input power = +8 dBm 20.5 25.0 dB Third order input intercept point IIP3 FRF = 900 and 900.8 MHz, PRF = –10 dBm/each tone, VCC = 4.75 to 5.25 V, PLO = –3 to +3 dBm 2RF – 2LO 2x2 PRF = –10 dBm 3RF – 3LO 3x3 PRF = –10 dBm Input 1 dB compression point IP1dB LO1 to LO2 isolation +23.5 40 +25.3 dBm –62 –53 –75 –65 dBc dBc +12.7 dBm 57 dB Channel-to-channel isolation 37 42 dB RF to IF isolation 30 47 dB LO leakage: 1xLO to RF port 2xLO to RF port 3xLO to RF port 4xLO to RF port 1xLO to IF port LO_SEL input –20 LO switching time –36 –25 –71 –73 –40 –25 –20 –28 –28 –23 dBm dBm dBm dBm dBm +150 +250 µA 1.0 µs RF port input return loss ZIN_RF With external matching components 14 dB LO port input return loss ZIN_LO With external matching components 14 dB IF port input return loss ZOUT_IF With external matching components 14 dB Note 1: Performance is guaranteed only under the conditions listed in this Table. Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com 201043H • Skyworks Proprietary and Confidential Information • Products and Product Information are Subject to Change Without Notice • April 7, 2011 5 DATA SHEET • SKY73087-11 DOWNCONVERSION MIXER Table 5. SKY73087-11 Spurious Suppression Measurements, 3GPP Band #20 (Note 1) Parameter Symbol Test Condition Min Typical Max Units –50 –45 dBc 2RF – 1LO 2x1 PRF = –10 dBm 4RF – 3LO 4x3 PRF = 0 dBm –89 –85 dBc 6RF – 4LO 6x4 PRF = 0 dBm –110 –85 dBc 7RF – 5LO 7x5 PRF = 0 dBm –115 –85 dBc 8RF – 6LO 8x6 PRF = 0 dBm –114 –85 dBc 9RF –6LO 9x6 PRF = 0 dBm –111 –85 dBc 10RF – 7LO 10x7 PRF = 0 dBm –107 –85 dBc Note 1: Performance is guaranteed only under the conditions listed in this Table. Table 6. SKY73087-11 Spurious Suppression Measurements, 3GPP Band #8 (Note 1) Typical Max Units 4RF – 3LO Parameter 4x3 Symbol PRF = –3 dBm Test Condition Min –86 –80 dBc 5RF – 4LO 5x4 PRF = –1.5 dBm –102 –95 dBc 6RF – 4LO 6x4 PRF = 0 dBm –109 –95 dBc 8RF – 6LO 8x6 PRF = 0 dBm –114 –95 dBc 9RF – 6LO 9x6 PRF = +8.5 dBm –112 –95 dBc 10RF –7LO 10x7 PRF = +7.5 dBm –103 –95 dBc 11RF – 8LO 11x8 PRF = +9 dBm –108 –95 dBc 12RF – 8LO 12x8 PRF = +10 dBm –109 –95 dBc 12RF – 9LO 12x9 PRF = +8.5 dBm –102 –95 dBc 13RF – 9LO 13x9 PRF = 0 dBm –122 –95 dBc 14RF – 10LO 14x10 PRF = +9 dBm –118 –95 dBc 15RF – 10LO 15x10 PRF = +11.5 dBm –115 –95 dBc 15RF – 11LO 15x11 PRF = 0 dBm –119 –95 dBc 16RF – 11LO 16x11 PRF = +11.5 dBm –112 –95 dBc 16RF – 12LO 16x12 PRF = +11 dBm –108 –95 dBc 17RF – 12LO 17x12 PRF = +11.5 dBm –117 –95 dBc 18RF – 13LO 18x13 PRF = +12 dBm –109 –95 dBc 19RF – 13LO 19x13 PRF = +12 dBm –116 –95 dBc 20RF – 14LO 20x14 PRF = +12 dBm –114 –95 dBc 21RF – 15LO 21x15 PRF = +12 dBm –118 –95 dBc 22RF – 15LO 22x15 PRF = +12 dBm –121 –95 dBc 23RF – 17LO 23x17 PRF = +12 dBm –127 –95 dBc Note 1: Performance is guaranteed only under the conditions listed in this Table. Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com 6 April 7, 2011 • Skyworks Proprietary and Confidential Information • Products and Product Information are Subject to Change Without Notice • 201043H DATA SHEET • SKY73087-11 DOWNCONVERSION MIXER Table 7. SKY73087-11 Spurious Suppression Measurements, 3GPP Band #5 (Note 1) Parameter Symbol Test Condition Min Typical Max Units –48 –45 dBc 2RF – 1LO 2x1 PRF = –10 dBm 4RF – 3LO 4x3 PRF = +5 dBm –80 –95 dBc 6RF – 4LO 6x4 PRF = +5 dBm –108 –95 dBc 7RF – 5LO 7x5 PRF = +5 dBm –102 –95 dBc 8RF – 6LO 8x6 PRF = +5 dBm –108 –95 dBc 9RF –6LO 9x6 PRF = +5 dBm –116 –95 dBc Note 1: Performance is guaranteed only under the conditions listed in this Table. Typical Performance Characteristics (Voltage Supply = +5 V, TC = +25 °C, LO = 0 dBm, RF Frequency = 900 MHz, IF Frequency = 350 MHz, LO Frequency = 1250 MHz, Unless Otherwise Noted) Figure 3. Mixer A Conversion Gain vs Frequency and Supply Voltage Figure 4. Mixer B Conversion Gain vs Frequency and Supply Voltage Figure 5. Mixer A Conversion Gain vs Frequency and Temperature Figure 6. Mixer B Conversion Gain vs Frequency and Temperature Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com 201043H • Skyworks Proprietary and Confidential Information • Products and Product Information are Subject to Change Without Notice • April 7, 2011 7 DATA SHEET • SKY73087-11 DOWNCONVERSION MIXER Figure 7. Mixer A Conversion Gain vs Frequency and LO Power Figure 8. Mixer B Conversion Gain vs Frequency and LO Power Figure 9. Mixer A Noise Figure vs Frequency and Supply Voltage Figure 10. Mixer B Noise Figure vs Frequency and Supply Voltage Figure 11. Mixer A Noise Figure vs Frequency and Temperature Figure 12. Mixer B Noise Figure vs Frequency and Temperature Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com 8 April 7, 2011 • Skyworks Proprietary and Confidential Information • Products and Product Information are Subject to Change Without Notice • 201043H DATA SHEET • SKY73087-11 DOWNCONVERSION MIXER Figure 13. Mixer A Noise Figure vs Frequency and LO Power Figure 14. Mixer B Noise Figure vs Frequency and LO Power Figure 15. Mixer A GSM850 Band IIP3 vs Frequency and Supply Voltage Figure 16. Mixer A EGSM900 Band IIP3 vs Frequency and Supply Voltage Figure 17. Mixer B GSM850 Band IIP3 vs Frequency and Supply Voltage Figure 18. Mixer B EGSM900 Band IIP3 vs Frequency and Supply Voltage Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com 201043H • Skyworks Proprietary and Confidential Information • Products and Product Information are Subject to Change Without Notice • April 7, 2011 9 DATA SHEET • SKY73087-11 DOWNCONVERSION MIXER Figure 19. Mixer A GSM850 Band IIP3 vs Frequency and Temperature Figure 20. Mixer A EGSM900 Band IIP3 vs Frequency and Temperature Figure 21. Mixer B GSM850 Band IIP3 vs Frequency and Temperature Figure 22. Mixer B EGSM900 Band IIP3 vs Frequency and Temperature Figure 23. Mixer A GSM850 Band IIP3 vs Frequency and LO Power Figure 24. Mixer A EGSM900 Band IIP3 vs Frequency and LO Power Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com 10 April 7, 2011 • Skyworks Proprietary and Confidential Information • Products and Product Information are Subject to Change Without Notice • 201043H DATA SHEET • SKY73087-11 DOWNCONVERSION MIXER Figure 25. Mixer B GSM850 Band IIP3 vs Frequency and LO Power Figure 26. Mixer B EGSM900 Band IIP3 vs Frequency and LO Power Figure 28. Mixer B 2RF–2LO vs Frequency and Temperature Figure 27. Mixer A 2RF–2LO vs Frequency and Temperature Figure 29. Mixer A 3RF–3LO vs Frequency and Temperature Figure 30. Mixer B 3RF–3LO vs Frequency and Temperature Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com 201043H • Skyworks Proprietary and Confidential Information • Products and Product Information are Subject to Change Without Notice • April 7, 2011 11 DATA SHEET • SKY73087-11 DOWNCONVERSION MIXER Figure 31. Mixer A IP1dB vs Frequency and Temperature Figure 32. Mixer B IP1dB vs Frequency and Temperature Figure 33. Mixer A IP1dB vs Frequency and Supply Voltage Figure 34. Mixer B IP1dB vs Frequency and Supply Voltage Figure 35.Mixer A IP1dB vs Frequency and LO Power Figure 36. Mixer B IP1dB vs Frequency and LO Power Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com 12 April 7, 2011 • Skyworks Proprietary and Confidential Information • Products and Product Information are Subject to Change Without Notice • 201043H DATA SHEET • SKY73087-11 DOWNCONVERSION MIXER Figure 37. Mixer A & B Channel-to-Channel Isolation vs Frequency and Temperature Figure 38. Mixer A LO to IF Leakage vs Frequency and Temperature Figure 39. Mixer B LO to IF Leakage vs Frequency and Temperature Figure 40. Mixer A LO to RF Leakage vs Frequency and Temperature Figure 41. Mixer B LO to RF Leakage vs Frequency and Temperature Figure 42. Mixer A RF to IF Isolation vs Frequency and Temperature Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com 201043H • Skyworks Proprietary and Confidential Information • Products and Product Information are Subject to Change Without Notice • April 7, 2011 13 DATA SHEET • SKY73087-11 DOWNCONVERSION MIXER Figure 43.Mixer B RF to IF Isolation vs Frequency and Temperature Evaluation Board Description Package Dimensions The SKY73087-11 Evaluation Board is used to test the performance of the SKY73087-11 downconversion mixer. An assembly drawing for the Evaluation Board is shown in Figure 44 and the layer detail is provided in Figure 45. A schematic diagram of the SKY73087-11 Evaluation Board is shown in Figure 46. The PCB layout footprint for the SKY73087-11 is provided in Figure 47. Figure 48 shows the package dimensions for the 36-pin MCM and Figure 49 provides the tape and reel dimensions. Circuit Design Considerations Since the device package is sensitive to moisture absorption, it is baked and vacuum packed before shipping. Instructions on the shipping container label regarding exposure to moisture after the container seal is broken must be followed. Otherwise, problems related to moisture absorption may occur when the part is subjected to high temperature during solder assembly. The following design considerations are general in nature and must be followed regardless of final use or configuration: 1. Paths to ground should be made as short as possible. 2. The ground pad of the SKY73087-11 has special electrical and thermal grounding requirements. This pad is the main thermal conduit for heat dissipation. Since the circuit board acts as the heat sink, it must shunt as much heat as possible from the device. Therefore, design the connection to the ground pad to dissipate the maximum wattage produced by the circuit board. 3. Skyworks recommends including external bypass capacitors on the VCC voltage inputs of the device. 4. Components L5, L6, L14, and L15 (see Figure 46) are high-Q low loss inductors. These inductors must be able to pass currents in excess of 200 mA DC. Package and Handling Information THE SKY73087-11 is rated to Moisture Sensitivity Level 3 (MSL3) at 260 °C. It can be used for lead or lead-free soldering. For additional information, refer to the Skyworks Application Note, PCB Design & SMT Assembly/Rework Guidelines for MCM-L Packages, document number 101752. Care must be taken when attaching this product, whether it is done manually or in a production solder reflow environment. Production quantities of this product are shipped in a standard tape and reel format. 5. Components R1 and R2 (see Figure 46) set the bias current for the IF amplifiers. Skyworks recommends that these resistors have a tolerance of ±1% to optimize performance consistency of the SKY73087-11. These resistors are not required for the Evaluation Board to operate as specified in Tables 3 through 6. Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com 14 April 7, 2011 • Skyworks Proprietary and Confidential Information • Products and Product Information are Subject to Change Without Notice • 201043H DATA SHEET • SKY73087-11 DOWNCONVERSION MIXER Figure 44. SKY73087-11 Evaluation Board Assembly Diagram Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com 201043H • Skyworks Proprietary and Confidential Information • Products and Product Information are Subject to Change Without Notice • April 7, 2011 15 DATA SHEET • SKY73087-11 DOWNCONVERSION MIXER Figure 45. SKY73087-11 Evaluation Board Layer Detail Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com 16 April 7, 2011 • Skyworks Proprietary and Confidential Information • Products and Product Information are Subject to Change Without Notice • 201043H DATA SHEET • SKY73087-11 DOWNCONVERSION MIXER Figure 46. SKY73087-11 Evaluation Board Schematic Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com 201043H • Skyworks Proprietary and Confidential Information • Products and Product Information are Subject to Change Without Notice • April 7, 2011 17 DATA SHEET • SKY73087-11 DOWNCONVERSION MIXER Figure 47. PCB Layout Footprint for the SKY73087-11 6 x 6 mm MCM Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com 18 April 7, 2011 • Skyworks Proprietary and Confidential Information • Products and Product Information are Subject to Change Without Notice • 201043H DATA SHEET • SKY73087-11 DOWNCONVERSION MIXER Figure 48. SKY73087-11 36-Pin MCM Package Dimensions Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com 201043H • Skyworks Proprietary and Confidential Information • Products and Product Information are Subject to Change Without Notice • April 7, 2011 19 DATA SHEET • SKY73087-11 DOWNCONVERSION MIXER Figure 49. SKY73087-11 Tape and Reel Dimensions Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com 20 April 7, 2011 • Skyworks Proprietary and Confidential Information • Products and Product Information are Subject to Change Without Notice • 201043H DATA SHEET • SKY73087-11 DOWNCONVERSION MIXER Ordering Information Model Name SKY73087-11 700-1000 MHz Downconversion Mixer Manufacturing Part Number SKY73087-11 Evaluation Board Part Number TW17-D870 Copyright © 2009, 2010, 2011 Skyworks Solutions, Inc. All Rights Reserved. Information in this document is provided in connection with Skyworks Solutions, Inc. (“Skyworks”) products or services. These materials, including the information contained herein, are provided by Skyworks as a service to its customers and may be used for informational purposes only by the customer. Skyworks assumes no responsibility for errors or omissions in these materials or the information contained herein. Skyworks may change its documentation, products, services, specifications or product descriptions at any time, without notice. Skyworks makes no commitment to update the materials or information and shall have no responsibility whatsoever for conflicts, incompatibilities, or other difficulties arising from any future changes. No license, whether express, implied, by estoppel or otherwise, is granted to any intellectual property rights by this document. Skyworks assumes no liability for any materials, products or information provided hereunder, including the sale, distribution, reproduction or use of Skyworks products, information or materials, except as may be provided in Skyworks Terms and Conditions of Sale. THE MATERIALS, PRODUCTS AND INFORMATION ARE PROVIDED “AS IS” WITHOUT WARRANTY OF ANY KIND, WHETHER EXPRESS, IMPLIED, STATUTORY, OR OTHERWISE, INCLUDING FITNESS FOR A PARTICULAR PURPOSE OR USE, MERCHANTABILITY, PERFORMANCE, QUALITY OR NON-INFRINGEMENT OF ANY INTELLECTUAL PROPERTY RIGHT; ALL SUCH WARRANTIES ARE HEREBY EXPRESSLY DISCLAIMED. SKYWORKS DOES NOT WARRANT THE ACCURACY OR COMPLETENESS OF THE INFORMATION, TEXT, GRAPHICS OR OTHER ITEMS CONTAINED WITHIN THESE MATERIALS. SKYWORKS SHALL NOT BE LIABLE FOR ANY DAMAGES, INCLUDING BUT NOT LIMITED TO ANY SPECIAL, INDIRECT, INCIDENTAL, STATUTORY, OR CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION, LOST REVENUES OR LOST PROFITS THAT MAY RESULT FROM THE USE OF THE MATERIALS OR INFORMATION, WHETHER OR NOT THE RECIPIENT OF MATERIALS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. Skyworks products are not intended for use in medical, lifesaving or life-sustaining applications, or other equipment in which the failure of the Skyworks products could lead to personal injury, death, physical or environmental damage. Skyworks customers using or selling Skyworks products for use in such applications do so at their own risk and agree to fully indemnify Skyworks for any damages resulting from such improper use or sale. Customers are responsible for their products and applications using Skyworks products, which may deviate from published specifications as a result of design defects, errors, or operation of products outside of published parameters or design specifications. Customers should include design and operating safeguards to minimize these and other risks. Skyworks assumes no liability for applications assistance, customer product design, or damage to any equipment resulting from the use of Skyworks products outside of stated published specifications or parameters. Skyworks, the Skyworks symbol, and “Breakthrough Simplicity” are trademarks or registered trademarks of Skyworks Solutions, Inc., in the United States and other countries. Third-party brands and names are for identification purposes only, and are the property of their respective owners. Additional information, including relevant terms and conditions, posted at www.skyworksinc.com, are incorporated by reference. Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com 201043H • Skyworks Proprietary and Confidential Information • Products and Product Information are Subject to Change Without Notice • April 7, 2011 21