SMP1321-011

DATA SHEET SMP1321 Series: Low Capacitance Plastic Packaged PIN Diodes Features Designed for high performance wireless switch applications 0.25 pF capacitance specified ● Available lead (Pb)-free MSL-1 @ 250 °C per JEDEC J-STD-020 ● Available in tape and reel packaging ● ● Description The SMP1321 series of plastic packaged, surface mountable PIN diodes are designed for high volume switch applications from 10 MHz to beyond 2 GHz. The low capacitance of these diodes (0.25 pF) combined with its low resistance (2.0 Ω maximum at 10 mA) make the SMP1321 series particularly suited to high isolation series connected PIN diode switches in battery operated circuits. Available in a selection of plastic packages and in a variety of configurations including a low inductance (0.4 nH) SOT-23 (SMP1321-007), the small footprint SC-79 and the miniature SC-70. The SMP1321-508 has been specifically designed for WLAN 802.11 a, b, and g applications. Absolute Maximum Ratings Characteristic Reverse voltage (VR) Power dissipation @ 25 °C lead temperature (PD) Storage temperature (TST) Operating temperature (TOP) ESD human body model Value 100 V 250 mW -65 °C to +150 °C -65 °C to +150 °C Class 1B NEW Skyworks offers lead (Pb)-free “environmentally friendly” packaging that is RoHS compliant (European Parliament for the Restriction of Hazardous Substances). Performance is guaranteed only under the conditions listed in the specifications table and is not guaranteed under the full range(s) described by the Absolute Maximum specifications. Exceeding any of the absolute maximum/minimum specifications may result in permanent damage to the device and will void the warranty. CAUTION: Although this device is designed to be as robust as possible, Electrostatic Discharge (ESD) can damage this device. This device must be protected at all times from ESD. Static charges may easily produce potentials of several kilovolts on the human body or equipment, which can discharge without detection. Industry-standard ESD precautions must be employed at all times. Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com 200048 Rev. B • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice. • October 25, 2004 1 DATA SHEET • SMP1321 SERIES Single SOT-23 SMP1321-001 Marking: PM1 Common Anode SOT-23 SMP1321-003 Marking: PM9 SMP1321-003LF Marking: RM9 Common Cathode SOT-23 SMP1321-004 Marking: PM3 SMP1321-004LF Marking: RM3 LS= 1.5 nH Series Pair SOT-23 SMP1321-005 Marking: PM2 SMP1321-005LF Marking: RM2 LS= 1.5 nH SC-70 SMP1321-074 Marking: PM2 LS= 1.4 nH Low Inductance SOT-23 SMP1321-007 Marking: PMB Single SOD-323 SMP1321-011 Marking: PM SMP1321-011LF Marking: RM Single SC-79 SMP1321-079 Anti-Parallel LGA SMP1321-508 Lead (Pb)-Free Marking: H SMP1321-079LF LS= 1.5 nH LS= 1.5 nH SC-70 SMP1321-073 Marking: PM9 LS= 1.4 nH LS= 0.4 nH SC-70 SMP1321-075 Marking: PMB LS= 1.4 nH LS= 1.5 nH LS= 0.7 nH LS = 0.6 nH LF denotes lead (Pb)-free packaging option as an alternative to our standard tin/lead (Sn/Pb) packaging. Electrical Specifications at 25 °C Parameter Reverse current (IR) Capacitance (CT)(1) Resistance (RS) Resistance (RS) Forward voltage (VF) Carrier lifetime (TI) I region width 1. The SMP1321-007 maximum capacitance is 0.40 pF. Condition VR = 100 V F = 1 MHz, V = 30 V F = 100 MHz, I = 1 mA F = 100 MHz, I = 10 mA IF = 10 mA IF = 10 mA Typ. Max. 10 0.25 Unit µA pF Ω Ω V µs µm 3.00 2.00 0.85 0.40 15 Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com 2 October 25, 2004 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice. • 200048 Rev. B DATA SHEET • SMP1321 SERIES Typical Performance Data 100 100 Series Resistance (Ω) 10 Forward Current (mA) 0.1 1 10 100 10 1 1 0.1 0.1 0.01 0.01 400 500 600 700 800 900 1000 Forward Current (mA) Forward Voltage (mV) Series Resistance vs. Current @ 100 MHz 0.8 0.7 800 700 600 DC Characteristic Capacitance (pF) 0.6 0.5 0.4 0.3 0.2 0.1 0 0 1 2 5 10 20 50 1 MHz–1 GHz 0V Conductance (µS) 500 400 300 200 10 V 100 40 V 0 0 500 1000 1500 2000 Reverse Voltage (V) Frequency (MHz) Capacitance vs. Reverse Voltage Conductance vs. Frequency and Reverse Voltage Resistance vs. Temperature @ 500 MHz IF (mA) 0.02 0.10 0.30 0.50 1.00 10.00 20.00 100.00 R -55 °C (Ω) 47.400 12.000 5.200 3.600 2.400 1.030 0.871 0.669 R -15 °C (Ω) 50.000 12.600 5.400 3.800 2.500 1.040 0.888 0.659 R +25 °C (Ω) 56.300 13.900 5.800 4.100 2.600 1.040 0.873 0.642 R +65 °C (Ω) 61.500 15.400 6.400 4.500 2.800 1.070 0.889 0.645 R +100 °C (Ω) 65.100 16.400 6.900 4.800 3.100 1.150 0.956 0.695 SMP1321-007 In the -007 configuration of the SOT-23 package, the package inductance is effectively reduced to 0.4 nH, in comparison to the 1.5 nH value of the standard configuration. This lower inductance will be particularly beneficial when the diodes are used as shunt connected switches at frequencies higher than 500 MHz, where inductance is the primary limitation on maximum switch isolation. To achieve the effective 0.4 nH, the SOT-23 package must be inserted in the microstrip circuit board with a gap in the trace, as shown in the figure. Because of the polarity of the diode junction, this low Gap inductance feature is only realizable with the cathode connected to ground. Ground Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com 200048 Rev. B • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice. • October 25, 2004 3 DATA SHEET • SMP1321 SERIES SOT-23 0.110 (2.80 mm) Min. 0.120 (3.04 mm) Max. 3 SC-70 0.012 (0.30 mm) Min. 0.020 (0.50 mm) Max. 0.047 (1.20 mm) Min. 0.055 (1.40 mm) Max. 1 2 0.071 (1.80 mm) Min. 0.087 (2.20 mm) Max. 0.010 (0.25 mm) Min. 0.016 (0.40 mm) Max. 0.071 (1.80 mm) Min. 0.094 (2.40 mm) Max. 1 0.014 (0.35 mm) Ref. 0.026 (0.65 mm) Ref. 2 0.083 (2.10 mm) Min. 0.104 (2.64 mm) Max. 3 0.045 (1.15 mm) Min. 0.053 (1.35 mm) Max. 0.037 (0.95 mm) Ref. 0.020 (0.51 mm) Ref. 0.076 (1.92 mm) Ref. 0.051 (1.30 mm) Ref. 0.003 (0.080 mm) Min. 0.008 (0.20 mm) Max. 8˚ Max. 0.035 (0.89 mm) Min. 0.044 (1.12 mm) Max. 0.004 (0.10 mm) Min. 0.007 (0.18 mm) Max. 0.031 (0.80 mm) Min. 0.039 (1.00 mm) Max. 0.022 (0.55 mm) Ref. 0.0005 (0.01 mm) Min. 0.004 (0.10 mm) Max. 0.004 (0.10 mm) Min. 0.012 (0.30 mm) Max. 0.000 (0.00 mm) Min. 0.004 (0.10 mm) Max. SOD-323 0.090 (2.30 mm) Min. 0.108 (2.74 mm) Max. 0.010 (0.25 mm) Min. 0.016 (0.40 mm) Max. 0.063 (1.60 mm) Min. 0.071 (1.80 mm) Max. SC-79 Cathode Indicator 0.010 (0.25 mm) Min. 0.014 (0.35 mm) Max. 1 0.006 (0.15 mm) Min. 0.028 (0.70 mm) Min. 0.035 (0.90 mm) Max. 2 0.045 (1.15 mm) Min. 0.053 (1.35 mm) Max. 1 2 Cathode Indicator 0.008 (0.20 mm) Nom. 0.006 (0.15 mm) Typ. 0.060 (1.50 mm) Min. 0.067 (1.70 mm) Max. 0.043 (1.10 mm) Min. 0.051 (1.30 mm) Max. 0.050 (1.25 mm) Max. 0.004 (0.10 mm) Max. 0.010 (0.25 mm) Min. 10˚ Max. 0.003 (0.07 mm) Min. 0.008 (0.20 mm) Max. 10˚ Max. 0.020 (0.50 mm) Min. 0.028 (0.70 mm) Max. LGA 0.058 (1.47 mm) 0.054 (1.39 mm) Pin 3 0.048 (1.23 mm) 0.044 (1.13 mm) Pin 4 Top View (0.00) (0.40) (0.87) (1.27) Pin 1 Side View Pin 2 0.028 (0.70 mm) 0.023 (0.58 mm) (1.03) (0.73) (0.30) (0.00) Pin 4 (0.138 x 45) Pin 3 Pin 1 Pin 2 (0.076) All Around Bottom View Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com 4 October 25, 2004 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice. • 200048 Rev. B DATA SHEET • SMP1321 SERIES Recommended Solder Reflow Profiles Profile Feature Average ramp-up rate (TL to TP) Preheat Temperature min. (TSMIN) Temperature max. (TSMAX) Time (min. to max.) (ts) TSMAX to TL Ramp-up rate Time maintained above: Temperature (TL) Time (tL) Peak temperature (TP) Time within 5 °C of actual peak temperature (tp) Ramp-down rate Time 25 °C to peak temperature SnPb Eutectic Assembly 3 °C/second max. 100 °C 150 °C 60–120 seconds — 183 °C 60–150 seconds 240 +0/-5 °C 10–30 seconds 6 °C/second max. 6 minutes max. Lead (Pb)-Free Assembly 100% Sn 3 °C/second max. 150 °C 200 °C 60–80 seconds 3 °C/second max. 217 °C 60–150 seconds 250 +0/-5 °C 20–40 seconds 6 °C/second max. 8 minutes max. All temperatures refer to the topside of the package, measured on the package body surface. Reference JEDEC J-STD-020B. TP tp Critical Zone TL to TL TL IL TSMAX Temperature TSMIN ts Preheat 25 ˚C t 25 ˚C to Peak Time Reference JEDEC J-STD-020 Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com 200048 Rev. B • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice. • October 25, 2004 5 DATA SHEET • SMP1321 SERIES Copyright © 2002, 2003, 2004, Skyworks Solutions, Inc. All Rights Reserved. Information in this document is provided in connection with Skyworks Solutions, Inc. (“Skyworks”) products. These materials are provided by Skyworks as a service to its customers and may be used for informational purposes only by the customer. Skyworks assumes no responsibility for errors or omissions in these materials. Skyworks may make changes to its documentation, products, specifications and product descriptions at any time, without notice. Skyworks makes no commitment to update the information and shall have no responsibility whatsoever for conflicts, incompatibilities, or other difficulties arising from future changes to its documentation, products, specifications and product descriptions. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by or under this document. Except as may be provided in Skyworks Terms and Conditions of Sale for such products, Skyworks assumes no liability whatsoever in association with its documentation, products, specifications and product descriptions. THESE MATERIALS ARE PROVIDED “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED OR OTHERWISE, RELATING TO SALE AND/OR USE OF SKYWORKS PRODUCTS INCLUDING WARRANTIES RELATING TO FITNESS FOR A PARTICULAR PURPOSE, MERCHANTABILITY, PERFORMANCE, QUALITY OR NON-INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. SKYWORKS FURTHER DOES NOT WARRANT THE ACCURACY OR COMPLETENESS OF THE INFORMATION, TEXT, GRAPHICS OR OTHER ITEMS CONTAINED WITHIN THESE MATERIALS. SKYWORKS SHALL NOT BE LIABLE FOR ANY DAMAGES, INCLUDING SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION, LOST REVENUES OR LOST PROFITS THAT MAY RESULT FROM THE USE OF THESE MATERIALS WHETHER OR NOT THE RECIPIENT OF MATERIALS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. Skyworks products are not intended for use in medical, lifesaving or life-sustaining applications. Skyworks customers using or selling Skyworks products for use in such applications do so at their own risk and agree to fully indemnify Skyworks for any damages resulting from such improper use or sale. The following are trademarks of Skyworks Solutions, Inc.: Skyworks™, the Skyworks logo, and Breakthrough Simplicity™. Product names or services listed in this publication are for identification purposes only, and may be trademarks of Skyworks or other third parties. Third-party brands and names are the property of their respective owners. Additional information, posted at www.skyworksinc.com, is incorporated by reference. Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com 6 October 25, 2004 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice. • 200048 Rev. B