SMV1236-079LF

DATA SHEET SMV123x Series: Hyperabrupt Junction Tuning Varactors Applications  Low tuning voltage VCOs  High-Q resonators in wireless system VCOs  High-volume commercial systems Features  High capacitance ratio  Low series resistance for low phase noise  Packages rated MSL1, 260 °C per JEDEC J-STD-020 Skyworks GreenTM products are compliant with all applicable legislation and are halogen-free. For additional information, refer to Skyworks Definition of GreenTM, document number SQ04–0074. Description The SMV123x series of silicon hyperabrupt junction varactor diodes are designed for use in Voltage Controlled Oscillators (VCOs) with a low tuning voltage operation. The low resistance of these varactors makes them appropriate for high-Q resonators in wireless system VCOs to frequencies over 10 GHz. This family of varactors is characterized for capacitance and resistance over temperature. Table 1 describes the various packages and markings of the SMV123x varactors. Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com 200058W • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • July 28, 2016 1 DATA SHEET • SMV123x VARACTORS Table 1. Packaging and Marking Single Single Single Common Cathode Common Anode Common Cathode Single SC-79 Green™ SOD-323 Green™ SOT-23 SOT-23 SC-70 SC-70 SOD-882 Green™ SMV1231-074LF Green™ Marking: KA3 SMV1231-040LF Marking: A SMV1231-079LF Marking: Cathode and HF SMV1232-079LF Marking: Cathode and HG SMV1232-040LF Marking: Y SMV1233-079LF Marking: Cathode and HK SMV1234-079LF Marking: Cathode and HS SMV1233-001LF Green™ Marking: DP1 ♦SMV1234-011LF SMV1233-040LF Marking: B SMV1234-004LF Green™ Marking: DQ3 Marking: DQ SMV1234-073LF Green™ Marking: DQ9 SMV1234-040LF Marking: G SMV1235-079LF Marking: Cathode and HX ♦SMV1236-079LF Marking: Cathode and HY SMV1235-040LF Marking: M SMV1236-011LF Marking: EQ SMV1236-040LF Marking: R SMV1237-001LF Green™ Marking: DT1 LS = 0.7 nH LS = 1.5 nH LS = 1.5 nH LS = 1.5 nH LS = 1.4 nH LS = 1.4 nH LS = 0.45 nH The Pb-free symbol or “LF” in the part number denotes a lead-free, RoHS-compliant package unless otherwise noted as Green™. Tin/lead (Sn/Pb) packaging is not recommended for new designs. Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com 2 July 28, 2016 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 200058W DATA SHEET • SMV123x VARACTORS Electrical and Mechanical Specifications Package and Handling Information The absolute maximum ratings of the SMV123x varactors are provided in Table 2. Electrical specifications are provided in Table 3. Typical capacitance values are listed in Table 4. Typical performance characteristics of the SMV123x varactors are illustrated in Figures 1 through 4. Instructions on the shipping container label regarding exposure to moisture after the container seal is broken must be followed. Otherwise, problems related to moisture absorption may occur when the part is subjected to high temperature during solder assembly. The SPICE model for the SMV123x varactors is shown in Figure 5 and the associated model parameters are provided in Table 5. The SMV123x series of varactors are rated to Moisture Sensitivity Level 1 (MSL1) at 260 C. They can be used for lead or lead-free soldering. For additional information, refer to the Skyworks Application Note, Solder Reflow Information, document number 200164. Package dimensions are shown in Figures 6 to 14 (even numbers), and tape and reel dimensions are provided in Figures 7 to 15 (odd numbers). Care must be taken when attaching this product, whether it is done manually or in a production solder reflow environment. Production quantities of this product are shipped in a standard tape and reel format. Table 2. SMV123x Absolute Maximum Ratings1 Parameter Symbol Minimum Maximum Units 15 V Reverse voltage VR Forward current IF 20 mA Power dissipation PDIS 250 mW Operating temperature TOP –55 +125 C Storage temperature TSTG –55 +150 C Electrostatic discharge: ESD 1000 V Human Body Model (HBM), Class 1B 1 Exposure to maximum rating conditions for extended periods may reduce device reliability. There is no damage to device with only one parameter set at the limit and all other parameters set at or below their nominal value. Exceeding any of the limits listed here may result in permanent damage to the device. ESD HANDLING: Although this device is designed to be as robust as possible, electrostatic discharge (ESD) can damage this device. This device must be protected at all times from ESD when handling or transporting. Static charges may easily produce potentials of several kilovolts on the human body or equipment, which can discharge without detection. Industry-standard ESD handling precautions should be used at all times. Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com 200058W • Skyworks Proprietary and Confidential information • Products and Product Information are Subject to Change Without Notice • July 28, 2016 3 DATA SHEET • SMV123x VARACTORS Table 3. SMV123x Electrical Specifications1 (TOP = 25 C, Unless Otherwise Noted) CT @ 1 V (pF) Part Number CT @ 3 V (pF) CT @ 1 V CT @ 3 V (Ratio) CT @ 6 V (pF) CT @ 1 V CT @ 6 V (Ratio) RS @ 3 V, 500 MHz (Ω) Min Max Typ Typ Min Max Min Max Typ SMV1231 1.43 1.72 0.97 0.61 1.5 1.8 2.5 2.8 2.90 SMV1232 2.34 2.86 1.50 0.94 1.5 1.9 2.6 3.3 1.50 SMV1233 3.00 3.60 1.80 1.10 1.5 1.9 2.6 3.3 1.20 SMV1234 5.85 7.15 3.60 2.00 1.6 2.0 2.8 3.4 0.80 SMV1235 10.35 12.65 6.40 3.60 1.6 2.0 2.9 3.4 0.60 SMV1236 15.50 18.50 9.20 5.30 1.6 2.0 3.0 3.5 0.50 SMV1237 45.00 54.00 26.90 14.40 1.6 2.0 3.0 3.5 0.40 1 Performance is guaranteed only under the conditions listed in this table. Tested with -079 package. Reverse voltage VR (IR = 10 μA) = 15 V minimum Reverse current IR (VR = 12 V) = 20 nA maximum Table 4. Capacitance vs Reverse Voltage CT (pF) VR (V) SMV1231 SMV1232 SMV1233 SMV1234 SMV1235 SMV1236 SMV1237 0 2.35 4.15 5.08 9.63 18.22 26.75 71.82 0.5 1.87 3.22 3.95 7.53 14.12 20.61 56.10 1.0 1.58 2.67 3.28 6.28 11.67 17.02 46.89 1.5 1.40 2.28 2.80 5.39 9.91 14.38 40.33 2.0 1.22 1.97 2.41 4.68 8.52 12.29 35.13 2.5 1.09 1.72 2.09 4.09 7.36 10.56 30.71 3.0 0.970 1.51 1.82 3.58 6.40 9.16 26.87 3.5 0.882 1.35 1.62 3.15 5.62 8.04 23.57 4.0 0.794 1.22 1.45 2.81 4.99 7.19 20.83 4.5 0.732 1.13 1.33 2.54 4.50 6.53 18.62 5.0 0.683 1.05 1.24 2.32 4.11 6.01 16.87 5.5 0.648 0.99 1.16 2.15 3.80 5.61 15.48 6.0 0.613 0.94 1.10 2.02 3.55 5.28 14.36 6.5 0.590 0.90 1.05 1.90 3.34 5.02 13.46 7.0 0.567 0.86 1.01 1.80 3.17 4.81 12.72 7.5 0.551 0.84 0.98 1.72 3.03 4.64 12.11 8.0 0.534 0.81 0.96 1.65 2.91 4.49 11.61 9.0 0.512 0.78 0.92 1.55 2.73 4.28 10.87 10.0 0.497 0.76 0.90 1.47 2.61 4.13 10.38 11.0 0.492 0.75 0.88 1.42 2.53 4.02 10.06 12.0 0.487 0.74 0.87 1.38 2.47 3.95 9.84 13.0 0.480 0.73 0.86 1.35 2.43 3.89 9.68 14.0 0.472 0.73 0.85 1.33 2.40 3.84 9.56 15.0 0.466 0.72 0.84 1.32 2.38 3.80 9.47 Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com 4 July 28, 2016 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 200058W DATA SHEET • SMV123x VARACTORS Typical Performance Characteristics 100.0 3 SMV1237 SMV1231 SMV1234 SMV1233 SMV1232 0.1 0 2.0 4.0 6.0 2 SMV1232 SMV1234 SMV1235 1 SMV1236 SMV1237 0 0 8.0 1 +4 +8 VR = 1 V +1 0 –1 –2 VR = 3 V –4 –20 0 +20 +40 4 5 +60 +80 Temperature (°C) Figure 3. Relative Capacitance Change vs Temperature +6 +4 +2 0 –2 –4 200058-004 +3 Percentage Change (%) +10 200058-003 Percentage Change (%) +5 –40 3 Figure 2. Series Resistance vs Reverse Voltage @ 500 MHz Figure 1. Capacitance vs Reverse Voltage –3 2 Reverse Voltage (V) Reverse Voltage (V) +2 SMV1233 200058-002 1.0 200058-001 Capacitance (pF) SMV1235 10.0 Series Resistance (Ω) SMV1231 SMV1236 –6 –8 –40 –20 0 +20 +40 +60 +80 Temperature (°C) Figure 4. Relative Series Resistance Change vs Temperature @ 500 MHz Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com 200058W • Skyworks Proprietary and Confidential information • Products and Product Information are Subject to Change Without Notice • July 28, 2016 5 DATA SHEET • SMV123x VARACTORS PORT P_anode port = 1 IND LS L = LS RES RS R = RS CAP CP C = CP DIODE Varactor_Diode AREA = 1 MODEL = Diode_Model MODE = nonlinear DIODEM Diode_Model IS = 1.00e-14 RS = 0 N=1 TT = 0 CJO = CJO M=M VJ = VJ EG = 1.11 XTI = 3 KF =0 AF =1 PORT P_Cathode port = 2 FC = 0.5 BV = VB IBV = 1e-3 ISR = 0 NR = 2 IKF = 0 NBV = 1 IBVL = 0 NBVL = 1 TBV1 = 0 TNOM = 27 FFE = 1 200058-005 Figure 5. SPICE Model Table 5. SPICE Model Parameters1 Part Number CJO (pF) VJ (V) M CP (pF) RS (Ω) SMV1231 1.88 10.13 4.999 0.44 2.50 SMV1232 3.43 8.36 4.690 0.68 1.50 SMV1233 4.21 11.87 6.430 0.81 1.20 SMV1234 8.36 7.95 3.960 1.15 0.80 SMV1235 15.85 8.78 4.570 2.15 0.60 SMV1236 22.89 9.62 5.230 3.59 0.50 SMV1237 61.40 14.51 6.780 8.90 0.25 1 Values extracted from measured performance. For package inductance (LS), refer to Table 1. For more details, refer to the Skyworks Application Note, Varactor SPICE Model for Approved RF VCO Applications, document number 200315. Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com 6 July 28, 2016 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 200058W DATA SHEET • SMV123x VARACTORS 0.071 (1.80 mm) Min 0.087 (2.20 mm) Max 0.010 (0.25 mm) Min 0.016 (0.40 mm) Max 3 0.071 (1.80 mm) Min 0.094 (2.40 mm) Max 0.045 (1.15 mm) Min 0.053 (1.35 mm) Max 1 2 0.014 (0.35 mm) Ref 0.026 (0.65 mm) Ref 0.051 (1.30 mm) Ref 0.004 (0.10 mm) Min 0.007 (0.18 mm) Max 0.004 (0.10 mm) Min 0.012 (0.30 mm) Max 0.031 (0.80 mm) Min 0.043 (1.10 mm) Max 0.000 (0.00 mm) Min 0.004 (0.10 mm) Max Dimensions are in inches (millimeters shown in parentheses) 200058-006 Figure 6. SC-70 Package Dimensions 4.00 ∅0.76 Min ∅1.50 +0.1/–0 1.75 ± 0.10 A 3.50 ± 0.05 (See Note 3) T ± 0.05 R 0.20 Max 1.19 (Ko) 2.50 (Bo) 2.00 2.25 (Ao) 1.00 8.00 +0.3/–0.1 2.00 ± 0.05 (See Note 3) 4.00 (See Note 1) A Pin 1 R 0.3 Typ 0.59 Section A Notes: 1. Sprocket hole pitch cumulative tolerance ±0.2 mm. 2. Carrier tape: black conductive polystyrene. 3. Pocket position relative to sprocket hole measured as true position of pocket, not pocket hole. 4. Cover tape material: transparent and conductive material. 5. All measurements are in millimeters. 200058-007 Figure 7. SC-70 Tape and Reel Dimensions Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com 200058W • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • July 28, 2016 7 DATA SHEET • SMV123x VARACTORS Box or Bar Polarity Indicator Area 0.006 (0.15 mm) Min 0.010 (0.25 mm) Min 0.014 (0.35 mm) Max 1 2 0.028 (0.70 mm) Min 0.035 (0.90 mm) Max 0.060 (1.50 mm) Min 0.067 (1.70 mm) Max 0.043 (1.10 mm) Min 0.051 (1.30 mm) Max 10° Max 0.020 (0.50 mm) Min 0.028 (0.70 mm) Max 0.003 (0.07 mm) Min 0.008 (0.20 mm) Max 10° Max Dimensions are in inches (millimeters shown in parentheses) 200058-008 Figure 8. SC-79 Package Dimensions Ø1.50± 0.10 4.00 ± 0.10 4.00 ± 0.10 2.00 ± 0.05 0.229 ± 0.02 (T) 1.75 ± 0.10 B A B 0.80 ± 0.05 (Ko) 8.00 ± 0.20 A 3.50 ± 0.05 1.40 ± 0.05 1.95 ± 0.05 (Bo) 2° Max Pin 1 Indicator Ø0.50± 0.05 Section B 0.39 ± 0.05 Notes: 1. Carrier tape: black conductive polycarbonate or polystyrene. 2. Cover tape material: transparent conductive PSA. 3. Cover tape size: 5.4 mm width. 4. ESD-surface resistivity is ≤1 x 108 Ohms/square per EIA, JEDEC TNR Specification. 5. All measurements are in millimeters. 2o Max 0.90 ± 0.05 (Ao) Section A 200058-009 Figure 9. SC-79 Tape and Reel Dimensions Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com 8 July 28, 2016 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 200058W DATA SHEET • SMV123x VARACTORS 0.060 (1.52 mm) Min 0.070 (1.78 mm) Max 0.090 (2.29 mm) Min 0.107 (2.72 mm) Max 0.044 (1.12 mm) Min 0.054 (1.37 mm) Max 1 0.000 (0 mm) Min 0.004 (0.10 mm) Max 0.013 (0.33 mm) Min 0.017 (0.43 mm) Max 2 0.012 (0.305 mm) Min 0.016 (0.406 mm) Max Cathode Indicator 0.036 (0.91 mm) Min 0.046 (1.17 mm) Max 0.008 Ref 0.025 (0.635 mm) Min 0.037 (0.940 mm) Max Gauge Datum For Foot Length Measurement 0.005 (0.127 mm) Min 0.008 (0.203 mm) Max 0.010 (0.25 mm) Min 0.018 (0.46 mm) Max Dimensions are in inches (millimeters shown in parentheses) 200058-010 Figure 10. SOD-323 Package Dimensions 4.00 2.00 ± 0.05 Ø1.50 +0.1/–0 Pin 1 Indicator Ø1.00 Min. 4.00 (See Note 4) 1.75 ± 0.10 A R0.3 Max. 3.50 ± 0.05 2.90 (Bo) 2.08 1.35 (Ko) 8.00 +0.30/–0.10 0.30 ± 0.05 A 1.52 (Ao) R0.5 Typ. 1.07 (K1) Section A 0.84 Notes: 1. 2. 3. 4. 5. Carrier tape: black conductive polystyrene. Cover tape: transparent conductive PSA. Cover tape size: 5.4 mm width. 10 sprocket hole pitch cumulative tolerance: ±0.20 mm. All measurements are in millimeters. 200058-011 Figure 11. SOD-323 Tape and Reel Dimensions Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com 200058W • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • July 28, 2016 9 DATA SHEET • SMV123x VARACTORS 0.110 (2.80 mm) Min 0.120 (3.04 mm) Max 0.012 (0.30 mm) Min 0.020 (0.50 mm) Max 3 0.083 (2.10 mm) Min 0.104 (2.64 mm) Max 0.047 (1.20 mm) Min 0.055 (1.40 mm) Max 2 1 0.037 (0.95 mm) Ref 0.020 (0.51 mm) Ref 0.076 (1.92 mm) Ref 0.035 (0.89 mm) Min 0.044 (1.12 mm) Max 0.003 (0.080 mm) Min 0.008 (0.20 mm) Max 8° Max. 0.0005 (0.01 mm) Min 0.004 (0.10 mm) Max 0.022 (0.55 mm) Ref Dimensions are in inches (millimeters shown in parentheses) 200058-012 Figure 12. SOT-23 Package Dimensions 4.00 ø1.00 Min ø1.5 + 0.1/–0 4.00 (See Note 5) 1.75 ± 0.10 3.50 ± 0.05 A 2.70 (Bo) R 0.3 Max 2.2 1.20 (Ko) 0.8 ± 0.05 1.0 R 0.5 Typ Pin 1 Indicator 8.00 + 0.3/–0.1 2.00 ± 0.05 0.25 ± 0.05 A 3.10 (Ao) Section A Notes: 1. 2. 3. 4. 5. 6. 7. Carrier tape: black conductive polycarbonate. Cover tape material: transparent conductive PSA. Cover tape size: 5.40 mm width. Tolerance ±0.10 mm. Ten sprocket hole pitch cumulative tolerance: ±0.2 mm. All measurements are in millimeters. Alternative carrier tape dimensions are: Ao = 3.3 Bo = 2.9 Ko = 1.22 Figure 13. SOT-23 Tape and Reel Dimensions Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com 10 July 28, 2016 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 200058W 200058-013 DATA SHEET • SMV123x VARACTORS 0.03 C Seating Plane 0.05/0.00 Pin 1 Indicator 5 2X 0.25 ± 0.05 C 0.05 2X 0.10 M A B 0.325 Terminal 1 1.000 0.650 B A 0.600 0.46 + 0.04 –0.06 0.05 2X 0.50 ± 0.05 0.10 M A B 4 2X Notes: 1. 2. 3. 4. All measurements are in millimeters. Dimensions and tolerances according to ASME Y14.5M-1994. These packages are used principally for discrete devices. This dimension includes stand-off height and package body thickness, but does not include attached features, e.g., external heatsink or chip capacitors. An integral heatslug is not considered an attached feature. 5. This dimension is primarily terminal plating, but does not include small metal protrusion. 200058-014 Figure 14. SOD-882 Package Dimensions 4.00 ± 0.10 Cathode Indicator 2.00 ± 0.05 ∅1.55 ± 0.05 (D0) 0.20 8.00 ± 0.1 1.75 ± 0.10 3.50 ± 0.05 1.15 ± 0.05 (Bo) A ∅0.40 ± 0.05 (D1) 0.47 ± 0.05 (Ko) 2.00 ± 0.05 B B A Section A 0.70 ± 0.05 (A0) Notes: 1. 2. 3. 4. 5. Carrier tape: black conductive polycarbonate. Cover tape: transparent conductive material. Cover tape size: 5.4 mm width. ESD surface resistivity is ≥1 x 104 ~ ≤ 1 x 108 Ohms/square. All dimensions are in millimeters. Section B 200058-015 Figure 15. SOD-882 Tape and Reel Dimensions Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com 200058W • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • July 28, 2016 11 DATA SHEET • SMV123x VARACTORS Copyright © 2002-2007, 2009-2012, 2014-2016 Skyworks Solutions, Inc. All Rights Reserved. Information in this document is provided in connection with Skyworks Solutions, Inc. (“Skyworks”) products or services. These materials, including the information contained herein, are provided by Skyworks as a service to its customers and may be used for informational purposes only by the customer. Skyworks assumes no responsibility for errors or omissions in these materials or the information contained herein. Skyworks may change its documentation, products, services, specifications or product descriptions at any time, without notice. Skyworks makes no commitment to update the materials or information and shall have no responsibility whatsoever for conflicts, incompatibilities, or other difficulties arising from any future changes. No license, whether express, implied, by estoppel or otherwise, is granted to any intellectual property rights by this document. Skyworks assumes no liability for any materials, products or information provided hereunder, including the sale, distribution, reproduction or use of Skyworks products, information or materials, except as may be provided in Skyworks Terms and Conditions of Sale. THE MATERIALS, PRODUCTS AND INFORMATION ARE PROVIDED “AS IS” WITHOUT WARRANTY OF ANY KIND, WHETHER EXPRESS, IMPLIED, STATUTORY, OR OTHERWISE, INCLUDING FITNESS FOR A PARTICULAR PURPOSE OR USE, MERCHANTABILITY, PERFORMANCE, QUALITY OR NON-INFRINGEMENT OF ANY INTELLECTUAL PROPERTY RIGHT; ALL SUCH WARRANTIES ARE HEREBY EXPRESSLY DISCLAIMED. SKYWORKS DOES NOT WARRANT THE ACCURACY OR COMPLETENESS OF THE INFORMATION, TEXT, GRAPHICS OR OTHER ITEMS CONTAINED WITHIN THESE MATERIALS. SKYWORKS SHALL NOT BE LIABLE FOR ANY DAMAGES, INCLUDING BUT NOT LIMITED TO ANY SPECIAL, INDIRECT, INCIDENTAL, STATUTORY, OR CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION, LOST REVENUES OR LOST PROFITS THAT MAY RESULT FROM THE USE OF THE MATERIALS OR INFORMATION, WHETHER OR NOT THE RECIPIENT OF MATERIALS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. Skyworks products are not intended for use in medical, lifesaving or life-sustaining applications, or other equipment in which the failure of the Skyworks products could lead to personal injury, death, physical or environmental damage. Skyworks customers using or selling Skyworks products for use in such applications do so at their own risk and agree to fully indemnify Skyworks for any damages resulting from such improper use or sale. Customers are responsible for their products and applications using Skyworks products, which may deviate from published specifications as a result of design defects, errors, or operation of products outside of published parameters or design specifications. Customers should include design and operating safeguards to minimize these and other risks. Skyworks assumes no liability for applications assistance, customer product design, or damage to any equipment resulting from the use of Skyworks products outside of stated published specifications or parameters. Skyworks and the Skyworks symbol are trademarks or registered trademarks of Skyworks Solutions, Inc., in the United States and other countries. Third-party brands and names are for identification purposes only, and are the property of their respective owners. Additional information, including relevant terms and conditions, posted at www.skyworksinc.com, are incorporated by reference. Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com 12 July 28, 2016 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 200058W