SMV1470-004

DATA SHEET SMV1470-004, SMV1470-004LF: Abrupt Junction Tuning Varactor Features High capacitance ratio Designed for high volume ● Available in tape and reel packaging ● Available lead (Pb)-free and RoHS-compliant MSL-1 @ 260 °C per JEDEC J-STD-020 ● ● Absolute Maximum Ratings Description The SMV1470-004 is a dual silicon hyperabrupt junction varactor diode in a common cathode configuration. The specified high capacitance ratio and low RS of this varactor make it appropriate for low noise VCOs and VCXOs in wireless systems. Applications include low noise and wideband VCO and VCXO for GSM, PCS, CDMA and analog phones. Characteristic Forward current (IF) Power dissipation (PD) Storage temperature (TST) Operating temperature (TOP) ESD human body model Value 20 mA 250 mW -55 °C to +150 °C -55 °C to +125 °C Class O Performance is guaranteed only under the conditions listed in the specifications table and is not guaranteed under the full range(s) described by the Absolute Maximum specifications. Exceeding any of the absolute maximum/minimum specifications may result in permanent damage to the device and will void the warranty. CAUTION: Although this device is designed to be as robust as possible, Electrostatic Discharge (ESD) can damage this device. This device must be protected at all times from ESD. Static charges may easily produce potentials of several kilovolts on the human body or equipment, which can discharge without detection. Industry-standard ESD precautions must be employed at all times. Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com 200069 Rev. B • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice. • February 23, 2006 1 DATA SHEET • SMV1470-004, SMV1470-004LF Electrical Specifications at 25 °C Parameter Reverse current (IR) Capacitance (CT) Capacitance (CT) Capacitance ratio (CTR) Series resistance (RS) Breakdown voltage (VBR) VR = 10 V VR = 1 V, F = 1 MHz VR = 4.5 V, F = 1 MHz CT (1 V)/CT (5 V) VR = 1.5 V, F = 900 MHz IR = 10 µA 10.0 65.8 12.0 5.0 70.0 13.4 6.0 0.5 0.8 Ω V Condition Min. Typ. Max. 20.0 74.2 14.8 Unit nA pF pF Common Cathode SOT-23 SMV1470-004 Marking: AT3 SMV1470-004LF Marking: ET3 LS = 1.4 nH Typical Performance Data 120 5 4 VVAR = 1 V VVAR = 2.5 V VVAR = 4 V Percent of Variation (%) 0 1 2 3 4 5 100 80 3 2 1 0 -1 -2 -3 CT (pF) 60 40 20 0 -4 -40 -20 0 20 40 60 80 VR (V) Temperature (˚C) Capacitance vs. Voltage Relative Capacitance Change vs. Temperature Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com 2 February 23, 2006 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice. • 200069 Rev. B DATA SHEET • SMV1470-004, SMV1470-004LF SOT-23 0.110 (2.80 mm) Min. 0.120 (3.04 mm) Max. 3 Capacitance vs. Voltage 0.012 (0.30 mm) Min. 0.020 (0.50 mm) Max. 0.047 (1.20 mm) Min. 0.055 (1.40 mm) Max. 1 2 VR (V) 0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 6.0 6.5 7.0 CT (pF) 113.9 87.4 71.3 59.3 49.0 39.1 29.4 21.4 16.3 13.3 11.5 10.3 9.5 8.9 8.5 8.1 7.9 7.7 7.6 7.5 7.5 0.083 (2.10 mm) Min. 0.104 (2.64 mm) Max. 0.037 (0.95 mm) Ref. 0.020 (0.51 mm) Ref. 0.076 (1.92 mm) Ref. 0.003 (0.080 mm) Min. 0.008 (0.20 mm) Max. 8˚ Max. 0.035 (0.89 mm) Min. 0.044 (1.12 mm) Max. 0.022 (0.55 mm) Ref. 0.0005 (0.01 mm) Min. 0.004 (0.10 mm) Max. SPICE Model PORT P_anode port = 1 IND LS L = LS DIODEM Diode_Model IS = 1.00e-14 RS = 0 N=1 TT = 0 CJO = CJO M=M VJ = VJ EG = 1.11 XTI = 3 KF =0 AF =1 FC = 0.5 BV = 0 IBV = 1e-3 ISR = 0 NR = 2 IKF = 0 NBV = 1 IBVL = 0 NBVL = 1 TBV1 = 0 TNOM = 27 FFE = 1 7.5 8.0 8.5 9.0 9.5 10.0 RES RS R = RS DIODE Varactor_Diode AREA = 1 MODEL = Diode_Model MODE = nonlinear Recommended Solder Reflow Profiles Refer to the “Recommended Solder Reflow Profile” Application Note. CAP CP C = CP Tape and Reel Information Refer to the “Discrete Devices and IC Switch/Attenuators Tape and Reel Package Orientation” Application Note. PORT P_Cathode port = 2 Part Number SMV1470-004 CJO (pF) 113 VJ (V) 25 M 13 CP (pF) 1 RS (Ω) 0.5 LS (nH) 1.4 Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com 200069 Rev. B • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice. • February 23, 2006 3 DATA SHEET • SMV1470-004, SMV1470-004LF Copyright © 2002, 2003, 2004, 2005, 2006, Skyworks Solutions, Inc. All Rights Reserved. Information in this document is provided in connection with Skyworks Solutions, Inc. (“Skyworks”) products. These materials are provided by Skyworks as a service to its customers and may be used for informational purposes only by the customer. Skyworks assumes no responsibility for errors or omissions in these materials. Skyworks may make changes to its documentation, products, specifications and product descriptions at any time, without notice. Skyworks makes no commitment to update the information and shall have no responsibility whatsoever for conflicts, incompatibilities, or other difficulties arising from future changes to its documentation, products, specifications and product descriptions. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by or under this document. Except as may be provided in Skyworks Terms and Conditions of Sale for such products, Skyworks assumes no liability whatsoever in association with its documentation, products, specifications and product descriptions. THESE MATERIALS ARE PROVIDED “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED OR OTHERWISE, RELATING TO SALE AND/OR USE OF SKYWORKS PRODUCTS INCLUDING WARRANTIES RELATING TO FITNESS FOR A PARTICULAR PURPOSE, MERCHANTABILITY, PERFORMANCE, QUALITY OR NON-INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. SKYWORKS FURTHER DOES NOT WARRANT THE ACCURACY OR COMPLETENESS OF THE INFORMATION, TEXT, GRAPHICS OR OTHER ITEMS CONTAINED WITHIN THESE MATERIALS. SKYWORKS SHALL NOT BE LIABLE FOR ANY DAMAGES, INCLUDING SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION, LOST REVENUES OR LOST PROFITS THAT MAY RESULT FROM THE USE OF THESE MATERIALS WHETHER OR NOT THE RECIPIENT OF MATERIALS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. Skyworks products are not intended for use in medical, lifesaving or life-sustaining applications. Skyworks customers using or selling Skyworks products for use in such applications do so at their own risk and agree to fully indemnify Skyworks for any damages resulting from such improper use or sale. The following are trademarks of Skyworks Solutions, Inc.: Skyworks™, the Skyworks logo, and Breakthrough Simplicity™. Product names or services listed in this publication are for identification purposes only, and may be trademarks of Skyworks or other third parties. Third-party brands and names are the property of their respective owners. Additional information, posted at www.skyworksinc.com, is incorporated by reference. Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com 4 February 23, 2006 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice. • 200069 Rev. B