SMV1702-011LF

DATA SHEET SMV1702-011LF Hyperabrupt Junction Tuning Varactor Applications • Low-noise and wideband UHF and VHF VCOs • High-volume, low-voltage VCOs Features • Low series resistance • High capacitance ratio • Small footprint SOD-323 package (MSL1, 260 °C per JEDEC J-STD-020) Description The SMV1702-011LF silicon hyperabrupt junction varactor diode is specifically designed for battery operation. The high capacitance ratio and low series resistance make this varactor appropriate for low-noise Voltage Controlled Oscillators (VCOs) used at frequencies in wireless systems. Table 1 describes the SOD-323 package and marking of the SMV1702-011LF varactor. Table 1. Packaging and Marking Single SOD-323 Green™ SMV1702-011LF Marking: HJ LS = 1.5 nH The Pb-free symbol or “LF” in the part number denotes a lead-free, RoHScompliant package unless otherwise noted as Green™. Tin/lead (Sn/Pb) packaging is not recommended for new designs. Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com 200071G • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • May 26, 2011 1 DATA SHEET • SMV1702-011LF HYPERABRUPT JUNCTION TUNING VARACTOR Table 2. SMV1702-011LF Absolute Maximum Ratings Parameter Symbol Minimum Typical Maximum Units 10 V Reverse voltage VR Forward current IF 20 mA Power dissipation PDIS 250 mW Operating temperature TOP –55 +125 °C Storage temperature TSTG –55 +150 °C Note: Exposure to maximum rating conditions for extended periods may reduce device reliability. There is no damage to device with only one parameter set at the limit and all other parameters set at or below their nominal value. Exceeding any of the limits listed here may result in permanent damage to the device. CAUTION: Although this device is designed to be as robust as possible, Electrostatic Discharge (ESD) can damage this device. This device must be protected at all times from ESD. Static charges may easily produce potentials of several kilovolts on the human body or equipment, which can discharge without detection. Industry-standard ESD precautions should be used at all times. The SMV1702-011LF varactor is a Class 0 Human Body Model (HBM) ESD device. Table 3. SMV1702-011LF Electrical Specifications (Note 1) (TOP = 25 °C, Unless Otherwise Noted) Parameter Symbol Test Condition Reverse current IR VR = 8 V Reverse breakdown voltage VBR IR = 10 μA Capacitance CT F = 1 MHz Min Typical Max Units