SMV2022

DATA SHEET SMV2022–SMV2023: Hyperabrupt Junction Tuning Varactors Features Low series resistance High capacitance ratio at low reverse voltage ● Designed for high volume, low cost battery applications ● Available in tape and reel packaging ● ● Description The SMV2022 and SMV2023 devices are silicon hyperabrupt junction varactor diodes. The specified high capacitance ratio and low RS of these varactors make them attractive for low phase noise VCOs in wireless systems. Absolute Maximum Ratings Characteristic Reverse voltage (VR) Forward current (IF) Power dissipation (PD) Storage temperature (TST) Operating temperature (TOP) ESD human body model Value 22 V 20 mA 250 mW -55 °C to +150 °C -55 °C to +125 °C Class 0 Performance is guaranteed only under the conditions listed in the specifications table and is not guaranteed under the full range(s) described by the Absolute Maximum specifications. Exceeding any of the absolute maximum/minimum specifications may result in permanent damage to the device and will void the warranty. CAUTION: Although this device is designed to be as robust as possible, Electrostatic Discharge (ESD) can damage this device. This device must be protected at all times from ESD. Static charges may easily produce potentials of several kilovolts on the human body or equipment, which can discharge without detection. Industry-standard ESD precautions must be employed at all times. Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com 200074 Rev. C • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice. • January 24, 2005 1 DATA SHEET • SMV2022–SMV2023 Electrical Specifications at 25 °C Part Number Min. SMV2022 SMV2023 2.5 4.4 CT @ 4 V (pF) Max. 3.3 5.4 Min. 0.6 0.9 CT @ 20 V (pF) Max. 0.85 1.20 CT @ 4 V CT @ 20 V (Ratio) Min. 3.0 4.2 Q@4V 50 MHz 500 500 Reverse current IR (VR = 16 nA): 50 nA. Performance is guaranteed only under the conditions listed in the Electrical Specifications table. Single SOT-23 SMV2022-001 Marking: VJ1 SMV2023-001 Marking: VK1 LS = 1.5 nH Common Cathode SOT-23 SMV2022-004 Marking: VJ3 SMV2023-004 Marking: VK3 LS = 1.5 nH Single SOD-323 SMV2023-011 Marking: VK LS = 1.5 nH Typical Performance Data 8 7 Capacitance (pF) 6 5 4 3 2 1 0 0 5 10 15 20 SMV2022 SMV2023 Reverse Voltage (V) Capacitance vs. Voltage Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com 2 January 24, 2005 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice. • 200074 Rev. C DATA SHEET • SMV2022–SMV2023 SPICE Model PORT P_anode port = 1 IND LS L = LS DIODEM Diode_Model IS = 1.00e-14 RS = 0 N=1 TT = 0 CJO = CJO M=M VJ = VJ EG = 1.11 XTI = 3 KF =0 AF =1 FC = 0.5 BV = 0 IBV = 1e-3 ISR = 0 NR = 2 IKF = 0 NBV = 1 IBVL = 0 NBVL = 1 TBV1 = 0 TNOM = 27 FFE = 1 Capacitance vs. Voltage VR (V) 0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 5.0 6.0 7.0 8.0 9.0 10.0 11.0 SMV2022 CT (pF) 7.41 5.94 5.14 4.56 4.14 3.78 3.49 3.23 3.01 2.54 2.18 1.8 1.5 1.29 1.11 1.03 0.96 0.91 0.87 0.83 0.81 0.78 0.76 0.75 0.73 SMV2023 CT (pF) 12.33 9.90 8.60 7.62 6.94 6.34 5.88 5.45 5.09 4.42 3.77 3.18 2.63 2.21 1.86 1.68 1.54 1.44 1.37 1.30 1.25 1.20 1.16 1.13 1.09 RES RS R = RS DIODE Varactor_Diode AREA = 1 MODEL = Diode_Model MODE = nonlinear CAP CP C = CP PORT P_Cathode port = 2 Part Number SMV2022 SMV2023 CJ0 (pF) 7.30 12.23 VJ (V) 4.0 4.0 M 1.4 1.4 CP (pF) 0 0 RS (Ω) 2.2 1.6 LS (nH) 1.5 1.5 12.0 13.0 14.0 15.0 16.0 SOT-23 0.110 (2.80 mm) Min. 0.120 (3.04 mm) Max. 3 17.0 18.0 0.012 (0.30 mm) Min. 0.020 (0.50 mm) Max. 0.047 (1.20 mm) Min. 0.055 (1.40 mm) Max. 1 2 19.0 20.0 0.083 (2.10 mm) Min. 0.104 (2.64 mm) Max. SOD-323 0.090 (2.30 mm) Min. 0.108 (2.74 mm) Max. 0.037 (0.95 mm) Ref. 0.020 (0.51 mm) Ref. 0.076 (1.92 mm) Ref. 0.003 (0.080 mm) Min. 0.008 (0.20 mm) Max. 8˚ Max. 0.035 (0.89 mm) Min. 0.044 (1.12 mm) Max. 0.045 (1.15 mm) Min. 0.053 (1.35 mm) Max. 1 2 0.010 (0.25 mm) Min. 0.016 (0.40 mm) Max. 0.063 (1.60 mm) Min. 0.071 (1.80 mm) Max. 0.022 (0.55 mm) Ref. 0.0005 (0.01 mm) Min. 0.004 (0.10 mm) Max. Cathode Indicator 0.008 (0.20 mm) Nom. 0.006 (0.15 mm) Typ. 0.050 (1.25 mm) Max. 0.004 (0.10 mm) Max. 0.010 (0.25 mm) Min. Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com 200074 Rev. C • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice. • January 24, 2005 3 DATA SHEET • SMV2022–SMV2023 Recommended Solder Reflow Profiles Profile Feature Average ramp-up rate (TL to TP) Preheat Temperature min. (TSMIN) Temperature max. (TSMAX) Time (min. to max.) (ts) TSMAX to TL Ramp-up rate Time maintained above: Temperature (TL) Time (tL) Peak temperature (TP) Time within 5 °C of actual peak temperature (tp) Ramp-down rate Time 25 °C to peak temperature SnPb Eutectic Assembly 3 °C/second max. 100 °C 150 °C 60–120 seconds — 183 °C 60–150 seconds 240 +0/-5 °C 10–30 seconds 6 °C/second max. 6 minutes max. Lead (Pb)-Free Assembly 100% Sn 3 °C/second max. 150 °C 200 °C 60–80 seconds 3 °C/second max. 217 °C 60–150 seconds 250 +0/-5 °C 20–40 seconds 6 °C/second max. 8 minutes max. All temperatures refer to the topside of the package, measured on the package body surface. Reference JEDEC J-STD-020C. TP tp Critical Zone TL to TL TL IL TSMAX Temperature TSMIN ts Preheat 25 ˚C t 25 ˚C to Peak Time Reference JEDEC J-STD-020 Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com 4 January 24, 2005 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice. • 200074 Rev. C DATA SHEET • SMV2022–SMV2023 Copyright © 2002, 2003, 2004, 2005, Skyworks Solutions, Inc. All Rights Reserved. Information in this document is provided in connection with Skyworks Solutions, Inc. (“Skyworks”) products. These materials are provided by Skyworks as a service to its customers and may be used for informational purposes only by the customer. Skyworks assumes no responsibility for errors or omissions in these materials. Skyworks may make changes to its documentation, products, specifications and product descriptions at any time, without notice. Skyworks makes no commitment to update the information and shall have no responsibility whatsoever for conflicts, incompatibilities, or other difficulties arising from future changes to its documentation, products, specifications and product descriptions. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by or under this document. Except as may be provided in Skyworks Terms and Conditions of Sale for such products, Skyworks assumes no liability whatsoever in association with its documentation, products, specifications and product descriptions. THESE MATERIALS ARE PROVIDED “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED OR OTHERWISE, RELATING TO SALE AND/OR USE OF SKYWORKS PRODUCTS INCLUDING WARRANTIES RELATING TO FITNESS FOR A PARTICULAR PURPOSE, MERCHANTABILITY, PERFORMANCE, QUALITY OR NON-INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. SKYWORKS FURTHER DOES NOT WARRANT THE ACCURACY OR COMPLETENESS OF THE INFORMATION, TEXT, GRAPHICS OR OTHER ITEMS CONTAINED WITHIN THESE MATERIALS. SKYWORKS SHALL NOT BE LIABLE FOR ANY DAMAGES, INCLUDING SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION, LOST REVENUES OR LOST PROFITS THAT MAY RESULT FROM THE USE OF THESE MATERIALS WHETHER OR NOT THE RECIPIENT OF MATERIALS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. Skyworks products are not intended for use in medical, lifesaving or life-sustaining applications. Skyworks customers using or selling Skyworks products for use in such applications do so at their own risk and agree to fully indemnify Skyworks for any damages resulting from such improper use or sale. The following are trademarks of Skyworks Solutions, Inc.: Skyworks®, the Skyworks logo, and Breakthrough Simplicity®. Product names or services listed in this publication are for identification purposes only, and may be trademarks of Skyworks or other third parties. Third-party brands and names are the property of their respective owners. Additional information, posted at www.skyworksinc.com, is incorporated by reference. Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com 200074 Rev. C • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice. • January 24, 2005 5