SU-A3DCN9E-FREQ

CRYSTAL CLOCK OSCILLATORS Data Sheet 0629H Rev. B LVDS HF VCXO SU-A3DCXXX Series Description The SU-A3DCXXX Series of voltage controlled crystal oscillators (VCXO) provides high frequency with LVDS complementary outputs. The outputs can be disabled for test automation or combining multiple clocks. The device does not use any frequency multiplication, providing exceptionally low Phase Noise and Jitter. It is packaged in a miniature, FR-4 based 9x14mm SMD package. Applications and Features • Wide frequency range – 12.0MHz to 280.000MHz • Fiber Channel; 10 GbE; Infiniband; Network Processors; SONET/SDH • High Reliability - NEL HALT/HASS qualified for crystal oscillator start-up conditions • Extremely Low Phase Noise and Jitter • High shock resistance, to 1000g • No Multiplication • Absolute Pull Range (APR) to ±100 ppm • SONET ±20 ppm overall free-run stability available • RoHS Compliant, Lead Free Construction Creating a Part Number SU - A 3DC X X X - FREQ Package Code Absolute Pull Range, ppm SU 6 pad 9x14 mm SMD E ±20 F ±32 Input Voltage G ±50 A 3.3V±5% H ±100 9 Customer specific Enable Option H Positive CMOS level N N/A Temperature Range, °C A 0 to 50 B 0 to 70 C -20 to 70 D -40 to 85 9 Customer specific 357 Beloit Street, P.O. Box 457, Burlington, WI 53105-0457 U.S.A. Phone 262/763-3591 FAX 262/763-2881 Email: nelsales@nelfc.com www.nelfc.com CRYSTAL CLOCK OSCILLATORS SU-A3DCXXX Series LVDS HF VCXO Continued Data Sheet 0629H Rev. B Absolute Maximum Ratings Parameter Operating Temperature Range Storage Temperature Range Supply Voltage Enable/Disable Voltage Parameter Nominal Frequency Supply Voltage Supply current Output Logic Type Load Output Levels Symb Fo Vcc Icc At receiving end between the outputs Differential amplitude Amplitude error Offset Voltage Offset Voltage error At outputs crossing, room temperature 20 to 80, 80 to 20 % Integrated from Phase Noise, 12 KHz to 20 MHz , RMS 100 Hz to 80 KHz, RMS 50 Khz to 80 Mhz Random period, Accumul., pk-to-pk Deterministic @ 10 Hz @100 Hz @1 KHz @10KHz @100KHz @>1MHz Overall, including initial calibration, temperature, aging 10 years, shock and vibration @ Vc=Vcc/2; APR 50ppm, or less Vc to set F at Fo; T, Vcc, load - nominal, as shipped Over all conditions, see part # creation @ Fmod < 100 Khz At Vc = Vcc/2, -3dB CMOS logic 1 or N/C CMOS logic 0 155.52 MHz, APR 50ppm or less 90 247 1.125 45/55 Symbol To Tst Vcc Ven/dis Conditions, Note Code A Value -40 to +85 -50 to +90 -0.5 to 4.5 0 to Vcc MIN 12 3.135 TYP 3.3 80 LVDS 100 330 1.25 50/50 0.5 0.1 MAX 280 3.465 100 110 454 50 1.375 50 55/45 0.7 0.2 1.0 0.3 2.5 17 0 None -75 -105 -128 -142 -147 -147 ±30 Unit ºC ºC V V Unit MHz V mA Ohm mV mV V mV % ns ps ps ps ps ps ps dBc dBc/Hz Electrical Parameters Vod Vof Duty Cycle (Symmetry) Rise/Fall Time Jitter Integrated Tr/Tf J Wavecrest characterized Sub-Harmonics Phase Noise £(Δf) Frequency Stability ΔF/F ±20 -70 -100 -125 -140 -145 -145 ppm Control Voltage Range Setability Absolute Pull Range Input Impedance Modulation Bandwidth Enable/Disable Option Pin 2 Enabled Pin 2 Disabled Vc Vcs APR Zin 0V 0.4 Vcc 20,32, 50,100 50 20 0.7 Vcc 0 0.5 Vcc Vcc 0.6 Vcc V V ppm KOhm KHz Vcc 0.3 Vcc V 357 Beloit Street, P.O. Box 457, Burlington, WI 53105-0457 U.S.A. Phone 262/763-3591 FAX 262/763-2881 Email: nelsales@nelfc.com www.nelfc.com CRYSTAL CLOCK OSCILLATORS Rev. B SU-A3DCXXX Series LVDS HF VCXO Electrical Connection Pin Connection 1 Vco 2 Enable/Disable 3 Gnd 4 Output 5 Output Complement 6 VCC Continued Environmental and Mechanical Characteristics Operating temp. range Mechanical Shock Thermal Shock Vibration Hermetic Seal Soldering conditions see part # table Per MIL-STD-202, Method 213, Cond. E Per MIL-STD-883, Method 1011, Cond. A Per MIL-STD-883, Method 2007, Cond. A Leak rate less than 1x10-8 atm.cc/s of helium See MAX reflow profile below Maximum Reflow Profile 357 Beloit Street, P.O. Box 457, Burlington, WI 53105-0457 U.S.A. Phone 262/763-3591 FAX 262/763-2881 Email: nelsales@nelfc.com www.nelfc.com