EM-6027P

Electrical Characteristics Sensitivity Symbol: S EM ELECTRET CONDENSER MICROPHONE Acoustic Product Specification Product Number: EM-6027P Unit: dB Condition: 0dB=1V/Pa, at 1kHz Center: -42 Limits: Min: -45 Max: -39 Output impedance Symbol: Z out Unit: KΩ Condition: f = 1kHz Limits: Max: 2.2 Current Consumption Symbol: IDSS Unit: µA Condition: VCC =3.0V, RL=2.2KΩ Limits: Max: 500 Signal to Noise Ratio Symbol: S/N Unit: dB Condition: at 1kHz S.P.L=1Pa (A-Weighted Curve) Release | Revision: B/2018 Limits: Min: 58 Decreasing Voltage Symbol: ΔS-VS CONTENTS This document contains the technical specifications for the omnidirectional back electret condenser microphone. Page 1 Electrical Characteristics Page 2 Typical Frequency Response Curve Measurement Circuit Page 3 Measurement Setup Drawing Product External and Dimensions Pad Layout Page 4 Exploded Drawing Material Table Page 5 Temperature Conditions Terminal Mechanical Strength Reliability Test Unit: dB Condition: VCC=2.0V to 1.0V Limits: Max: -3 Operating Voltage Unit: V Limits: Min: 1.0 Max: 10 Maximum input S.P.L Unit: dB Condition: THD