MODEL: SP-1511S-5
PRODUCT: Dynamic Speaker
EDITION: A/2016
THIS SPECIFICATION COVERS OUR PRODUCT OF DYNAMIC SPEAKER UNIT FOR MOBILE TELEPHONE USE
SPEAKER ELECTROACOUSTIC CHARACTERISTICS
ac impedance
8±15%Ω(@2KHz 1V) without baffler
sound pressure level
82±3dB SPL @0.7,0.8 ,1.0,1.5and2.0KHz in average (0dB SPL=20μPa)
measuring condition
0.1W (Sine wave) 10cm measured with baffler shown in Fig.2.1
90±3dB SPL @0.7,0.8 ,1.0,1.5and2.0KHz in average (0dB SPL=20μPa)
measuring condition
0.6W (Sine wave) 10cm measured with baffler shown in Fig. 2.2
frequency response curve
As shown in Fig. 2.1 and 2.2
response frequency
650±20%Hz @ 1V in free air
900±20%Hz @ 1V in 1cc box
rated noise power
0.5W
short term max power
0.8W (in 1cc box)
operation test
Must be free of audible noise (buzzes and rattles)
(300~5KHz frequency range, input level up to 2.0Vrms in 1cc box)
distortion
Less than 10% @1KHz,0.1M,0.1W frequency range ,input level up to 0.1W)
dimension
15 x 11 x 4.8 mm
GENERAL SPECIFICATIONS
operating temperature range
-20oC ~+60oC
standard test conditions
temperature
17oC ~25oC
relative humidity
45%~80%(RH)
RELIABILITY TESTS
The sound pressure as specified shall neither deviate more than ±3dB form the initial value, nor have any significant damage after any of
following testing.
HIGH TEMPERATURE TEST
high temperature
+60±2oC
duration
96 hours
LOW TEMPERATURE TEST
low temperature
-20±2oC
duration
96 hours
HEAT SHOCK TEST
high temperature
+60±2oC
low temperature
-20±2oC
changeover time
很抱歉,暂时无法提供与“SP-1511S-5”相匹配的价格&库存,您可以联系我们找货
免费人工找货