SN8P1603

SN8P1602B 8-Bit Micro-Controller SN8P1602B USER’S MANUAL General Release Specification SONiX 8-Bit Micro-Controller SONIX reserves the right to make change without further notice to any products herein to improve reliability, function or design. SONIX does not assume any liability arising out of the application or use of any product or circuit described herein; neither does it convey any license under its patent rights nor the rights of others. SONIX products are not designed, intended, or authorized for us as components in systems intended, for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SONIX product could create a situation where personal injury or death may occur. Should Buyer purchase or use SONIX products for any such unintended or unauthorized application. Buyer shall indemnify and hold SONIX and its officers, employees, subsidiaries, affiliates and distributors harmless against all claims, cost, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use even if such claim alleges that SONIX was negligent regarding the design or manufacture of the part. SONiX TECHNOLOGY CO., LTD Version 1.2 SN8P1602B 8-Bit Micro-Controller AMENDENT HISTORY Version VER 1.0 VER 1.1 Date Sep. 2003 Sep. 2003 Description V1.0 First Issue 1. Remove approval sheet 2. Remove PCB layout notice section. 3. Modify the description of code option notice. 4. Add the description of PEDGE register. 5. Modify the description of INTRQ register. 6. Change operating voltage range from “2.2V ~ 5.5V” to “2.4V ~ 5.5V” at Fosc=3.579545 MHz, ambient temperature = 25°C. VER 1.2 Dec. 2003 1. Add “without pull-up resistor” in p1.4 pin description. 2. Correct the definition of P00G [1:0] (PEDGE register). Change “01 = rising edge” to “01 = falling edge”. Change “10 = falling edge” to “10 = rising edge”. 3. Add MASK/OTP relative table SONiX TECHNOLOGY CO., LTD Version 1.2 SN8P1602B 8-Bit Micro-Controller Table of Content AMENDENT HISTORY ............................................................................................................................... 2 1 PRODUCT OVERVIEW................................................................................................................. 8 GENERAL DESCRIPTION........................................................................................................................... 8 UPGRADE FROM SN8P1602/SN8P1603/SN8P1602A............................................................................... 8 FEATURES .................................................................................................................................................... 9 SELECTION TABLE..................................................................................................................................... 9 MASK/OTP RELATIVE TABLE ....................................................................................................................... 9 SYSTEM BLOCK DIAGRAM.................................................................................................................... 10 PIN ASSIGNMENT ..................................................................................................................................... 11 PIN DESCRIPTIONS .................................................................................................................................. 12 PIN CIRCUIT DIAGRAMS ........................................................................................................................ 12 2 3 CODE OPTION TABLE ............................................................................................................... 13 SN8P1602B .................................................................................................................................................. 13 ADDRESS SPACES ....................................................................................................................... 14 PROGRAM MEMORY (ROM)................................................................................................................... 14 OVERVIEW .............................................................................................................................................. 14 USER RESET VECTOR ADDRESS (0000H) ........................................................................................... 15 INTERRUPT VECTOR ADDRESS (0008H) ............................................................................................ 15 CHECKSUM CALCULATION ................................................................................................................. 17 GENERAL PURPOSE PROGRAM MEMORY AREA.............................................................................. 18 LOOK-UP TABLE DESCRIPTION.......................................................................................................... 18 JUMP TABLE DESCRIPTION................................................................................................................. 20 DATA MEMORY (RAM) ........................................................................................................................... 22 OVERVIEW .............................................................................................................................................. 22 WORKING REGISTERS............................................................................................................................. 23 SONiX TECHNOLOGY CO., LTD Page 3 Version 1.2 SN8P1602B 8-Bit Micro-Controller Y, Z REGISTERS ...................................................................................................................................... 23 R REGISTERS........................................................................................................................................... 24 PROGRAM FLAG ....................................................................................................................................... 25 RESET/WAKEUP FLAG .......................................................................................................................... 25 CARRY FLAG ........................................................................................................................................... 25 DECIMAL CARRY FLAG......................................................................................................................... 25 ZERO FLAG ............................................................................................................................................. 25 ACCUMULATOR ....................................................................................................................................... 26 STACK OPERATIONS ............................................................................................................................... 27 OVERVIEW .............................................................................................................................................. 27 STACK REGISTERS ................................................................................................................................. 28 STACK OPERATION EXAMPLE............................................................................................................. 29 PROGRAM COUNTER............................................................................................................................... 29 ONE ADDRESS SKIPPING ..................................................................................................................... 30 MULTI-ADDRESS JUMPING ................................................................................................................. 31 4 5 6 ADDRESSING MODE................................................................................................................... 32 OVERVIEW................................................................................................................................................. 32 IMMEDIATE ADDRESSING MODE....................................................................................................... 32 DIRECTLY ADDRESSING MODE .......................................................................................................... 32 INDIRECTLY ADDRESSING MODE ...................................................................................................... 32 SYSTEM REGISTER .................................................................................................................... 33 OVERVIEW................................................................................................................................................. 33 SYSTEM REGISTER ARRANGEMENT (BANK 0)................................................................................. 33 BYTES of SYSTEM REGISTER ................................................................................................................ 33 BITS of SYSTEM REGISTER.................................................................................................................... 34 POWER ON RESET ...................................................................................................................... 35 OVERVIEW................................................................................................................................................. 35 EXTERNAL RESET DESCRIPTION......................................................................................................... 36 SONiX TECHNOLOGY CO., LTD Page 4 Version 1.2 SN8P1602B 8-Bit Micro-Controller LOW VOLTAGE DETECTOR (LVD) DESCRIPTION ............................................................................ 37 7 OSCILLATORS ............................................................................................................................. 38 OVERVIEW................................................................................................................................................. 38 CLOCK BLOCK DIAGRAM .................................................................................................................... 38 OSCM REGISTER DESCRIPTION.......................................................................................................... 39 EXTERNAL HIGH-SPEED OSCILLATOR .............................................................................................. 40 OSCILLATOR MODE CODE OPTION ................................................................................................... 40 OSCILLATOR DEVIDE BY 2 CODE OPTION ....................................................................................... 40 OSCILLATOR SAFE GUARD CODE OPTION....................................................................................... 40 SYSTEM OSCILLATOR CIRCUITS ......................................................................................................... 41 External RC Oscillator Frequency Measurement .................................................................................... 42 INTERNAL LOW-SPEED OSCILLATOR ................................................................................................ 43 SYSTEM MODE DESCRIPTION............................................................................................................... 44 OVERVIEW .............................................................................................................................................. 44 NORMAL MODE...................................................................................................................................... 44 SLOW MODE ........................................................................................................................................... 44 GREEN MODE......................................................................................................................................... 44 POWER DOWN MODE ........................................................................................................................... 44 SYSTEM MODE CONTROL...................................................................................................................... 45 SYSTEM MODE SWITCHING ................................................................................................................. 46 WAKEUP TIME .......................................................................................................................................... 47 OVERVIEW .............................................................................................................................................. 47 HARDWARE WAKEUP............................................................................................................................ 47 EXTERNAL WAKEUP TRIGGER CONTROL ......................................................................................... 48 8 TIMERS .......................................................................................................................................... 49 WATCHDOG TIMER (WDT)..................................................................................................................... 49 TIMER0 (TC0) ............................................................................................................................................. 50 OVERVIEW .............................................................................................................................................. 50 TC0M MODE REGISTER ........................................................................................................................ 51 TC0C COUNTING REGISTER ................................................................................................................ 52 TC0 TIMER OPERATION SEQUENCE .................................................................................................. 53 SONiX TECHNOLOGY CO., LTD Page 5 Version 1.2 SN8P1602B 8-Bit Micro-Controller 9 INTERRUPT................................................................................................................................... 54 OVERVIEW................................................................................................................................................. 54 INTEN INTERRUPT ENABLE REGISTER .............................................................................................. 55 INTRQ INTERRUPT REQUEST REGISTER............................................................................................ 55 INTERRUPT OPERATION DESCRIPTION.............................................................................................. 56 GIE GLOBAL INTERRUPT OPERATION............................................................................................... 56 INT0 (P0.0) INTERRUPT OPERATION .................................................................................................. 57 TC0 INTERRUPT OPERATION .............................................................................................................. 58 MULTI-INTERRUPT OPERATION ......................................................................................................... 59 10 11 12 13 I/O PORT ............................................................................................................................ 60 OVERVIEW................................................................................................................................................. 60 I/O PORT FUNCTION TABLE................................................................................................................... 61 I/O PORT MODE......................................................................................................................................... 61 I/O PULL UP REGISTER............................................................................................................................ 62 I/O PORT DATA REGISTER ..................................................................................................................... 62 CODING ISSUE ................................................................................................................. 63 TEMPLATE CODE ..................................................................................................................................... 63 PROGRAM CHECK LIST .......................................................................................................................... 67 INSTRUCTION SET TABLE........................................................................................... 68 ELECTRICAL CHARACTERISTIC .............................................................................. 69 ABSOLUTE MAXIMUM RATING............................................................................................................ 69 SONiX TECHNOLOGY CO., LTD Page 6 Version 1.2 SN8P1602B 8-Bit Micro-Controller STANDARD ELECTRICAL CHARACTERISTIC.................................................................................... 69 CHARACTERISTIC GRAPHS ................................................................................................................... 70 14 PACKAGE INFORMATION ........................................................................................... 73 P-DIP 18 PIN................................................................................................................................................ 73 SOP 18 PIN .................................................................................................................................................. 74 SSOP 20 PIN ................................................................................................................................................ 75 SONiX TECHNOLOGY CO., LTD Page 7 Version 1.2 SN8P1602B 8-Bit Micro-Controller 1 PRODUCT OVERVIEW GENERAL DESCRIPTION The SN8P1602B is an 8-bit micro-controller utilized CMOS technology and featured with low power consumption and high performance by its unique electronic structure. SN8P1602B is designed with the excellent IC structure including the program memory up to 1K-word OTP ROM, data memory of 48-bytes RAM, one 8-bit timer (TC0), a watchdog timer, two interrupt sources (TC0, INT0), and 4-level stack buffers. Besides, user can choose desired oscillator configuration for the controller. There are four external oscillator configurations to select for generating system clock, including High/Low speed crystal, ceramic resonator or cost-saving RC. SN8P1602B also includes an internal RC oscillator for slow mode controlled by programming. UPGRADE FROM SN8P1602/SN8P1603/SN8P1602A Item Standby Current at 3V Pull-up resistor Power On Reset / Brown Out Reset SN8P1602B