1T363A

1T363A Silicon Variable Capacitance Diode Description The 1T363A is a variable capacitance diode designed for electronic tuning of TV tuners, and the super-miniature package allows the tuner miniaturization. Features • Super miniature package • Low series resistance 0.8 Ω Max. (f=470 MHz) • Large capacitance ratio 15 Typ. (C1/C28) • Small leakage current 10 nA Max. (VR=28 V) • Capacitance deviation within 2 % Applications Electronic tuning of TV and CATV Structure Silicon epitaxial planar type diode M-235 Absolute Maximum Ratings (Ta=25 °C) • Reverse voltage VR 30 V • Peak reverse voltage VRM 35 V (RL≥10 kΩ) • Operating temperature Topr 85 °C • Storage temperature Tstg –55 to +150 °C Electrical Characteristics Item Reverse current Diode capacitance Capacitance ratio Series resistance Capacitance deviation in a matching group Symbol IR C1 C28 C1/C28 rs ∆C Conditions VR=28 V VR=1 V, f=1 MHz VR=28 V, f=1 MHz f=1 MHz CD=14 pF, f=470 MHz VR=1 to 28 V, f=1 MHz Min. 34.65 2.361 13.5 Typ. 38.00 2.515 15.0 0.75 Max. 10 42.35 2.754 0.80 2 (Ta=25 °C) Unit nA pF pF Ω % ∆C:The capacitance deviation of continuous 20 pcs of 1T363A is ranged within 2% in any place of the taping package. Sony reserves the right to change products and specifications without prior notice. This information does not convey any license by any implication or otherwise under any patents or other right. Application circuits shown, if any, are typical examples illustrating the operation of the devices. Sony cannot assume responsibility for any problems arising out of the use of these circuits. —1— E93575C8X 1T363A Product Name and Package Specification for the 1T362A. According to the classification number for the combination of capacitance deviations (hereafter ∆C), assembly method and automatic mounting equipment section, the following product names are assigned. Base model 1T363A 04 T8 A Derived model 1T363A M 20 A T8 A Note 1 : Package specification as ordered by customer ∗ Taping direction ∗ T8 only to consolidate specifications Special selection symbol Note 2 : ∆C kit number Note 3 : Assembly method M=MAP Note1) In taping packaging of products groups according to the ∆C classification, products must be divided according to the group. If taping is performed without grouping into categories, products from two different groups may be mounted on the same tuner, so that ∆C cannot be assured during tuning, making tuning defective. A: Panasert method; Sections are divided by four blank spaces on the carrier tape. B: Sanyo method; Black tape is affixed to one blank space on the carrier tape to mark sections. Note 2) ∆C kit number When taping each group, taping is performed in kit number multiples. 01; Incomplete kit (∆C not guaranteed) 04; 4 kits 20; 20 kits Recommended kit number; 4 and 20 Other) Minimum number of kits per group is 240 (60 or more at the beginning of the carrier tape). Up to nine sections on one reel. Note 3) “MAP” is the method where the neighboring chips are assembled continuously in order to enhance the concentration of the capacitance deviation in a matching group. —2— 1T363A Diode capacitance vs. Reverse voltage 100 Ta=25°C f=1MHz Diode capacitance (pF) 10 1 1 10 Reverse voltage (V) 50 Reverse voltage vs. Ambient temperature 1R=10µA VR-Reverse voltage (V) 50 40 30 –20 0 20 40 60 80 Ta-Ambient temperature (°C) —3— 1T363A Diode capacitance vs. Ambient temperature 1.03 f=1MHz VR=1V Reverse current vs. Ambient temperature 1000 VR=28V C (Ta) diode capacitance C (25°C) 1.02 VR=2V IR-Reverse current (pA) 100 1.01 VR=10V VR=25V 10 1.00 1 0.99 0.98 –20 0 20 40 60 80 100 –20 0 20 40 60 80 Ta-Ambient temperature (°C) Ta-Ambient temperature (°C) Thermal coefficient of diode capacitance 1000 f=1MHz 100 Reverse current vs. Reverse voltage Ta=60°C Thermal coefficient (ppm/°C) IR-Reverse current (pA) Ta=25°C 10 100 10 1 10 VR-Reverse voltage (V) 30 1 1 10 VR-Reverse voltage (V) 100 —4— 1T363A Package Outline Unit : mm M-235 + 0.2 ∗1.25 – 0.1 + 0.1 0.3 – 0.05 0.2 ∗0.9 ± 0.1 2 ∗1.7 ± 0.1 1 + 0.1 0.3 – 0.05 2.5 ± 0.2 0 ± 0.05 + 0.1 0.11 – 0.06 0° to 10° NOTE: Dimension “∗” does not include mold protrusion. SONY CODE EIAJ CODE JEDEC CODE M-235 PACKAGE WEIGHT 0.1g Marking CATHODE MARK 2 63 B Notes 1) B:Lot No.(Year and Month of manufacture) Year;Last one digit Month;A,B,C(for Oct. to Dec.) 1 to 9(for Jan.to Sept.) 1 —5—