CXM3525ER

DP10T Antenna Switch Module for GSM/UMTS Dual Mode Phones Preliminary Preliminary CXM3525ER Description The CXM3525ER is a DP10T anntena switch module for GSM/UMTS dual mode handset. The CXM3525ER has a built-in dual low pass filter and a +1.8V CMOS compatible decoder. The Sony GaAs junction gate pHEMT (JPHEMT) MMIC process is used low insertion loss and high linearity. (Applications: GSM /UMTS Dual Mode handsets) Features Low insertion loss : 1.10dB (Typ.) Tx1 (GSM Low band) 1.05dB (Typ.) Tx2 (GSM High band) 0.40dB (Typ.) UMTS 800M (UMTS Band V) 0.80dB (Typ.) UMTS 2G (UMTS Band I) 25dB (Min.) On Tx1 path @1648-1830MHz 25dB (Min.) On Tx2 path @3420-3820MHz VDD = 2.5V High attenuation: Low voltage operation: 1.8V control input No DC blocking capacitors required on RF ports Small package (Size): VQFN-30P (3.4mm × 4.0mm × 0.85mm Max.) Lead-free and RoHS compliant Package VQFN-30P (3.4mm × 4.0mm × 0.85mm Max.) Structure GaAs JPHEMT MMIC Switch, CMOS Decoder Note on Handling This IC is ESD sensitive devices. Special handling precautions are required. Sony reserves the right to change products and specifications without prior notice. This information does not convey any license by any implication or otherwise under any patents or other right. Application circuits shown, if any, are typical examples illustrating the operation of the devices. Sony cannot assume responsibility for any problems arising out of the use of these circuits. -1- PE09714 CXM3525ER Absolute Maximum Ratings Bias voltage Control voltage Maximum input VDD Vctl [Tx1] [Tx2] [TRx1, 2, 3, 4] [Rx1, 2, 3, 4] Operating temperature Storage temperature Topr Tstg 4 4 36 34 32 13 –30 to +85 –65 to +150 V V dBm dBm dBm dBm °C °C (Ta = 25°C) (Ta = 25°C) (Duty cycle = 12.5 to 50%) (Ta = 25°C) (Duty cycle = 12.5 to 50%) (Ta = 25°C) (Ta = 25°C) (Ta = 25°C) -2- CXM3525ER Block Diagram F28 Ant1 F1 GSM Tx1 (900M) F2 F19 F26 F3 GSM Tx2 (1.9G) F4 F20 F5 GSM Rx1 (850M) F9 F10 F6 GSM Rx2 (900M) F7 GSM Rx3 (1.8G) F29 F8 GSM Rx4 (1.9G) F21 Ant2 (Ext) F30 F27 F12 F13 TRx2 (UMTS1.5G) F14 F15 F16 F17 TRx4 (UMTS2G) F18 F25 F23 F32 F24 F22 F11 F31 TRx1 (UMTS800M) TRx3 (UMTS1.7G) -3- CXM3525ER Pin Configuration GSM Tx2 (1.9G) 15 14 13 12 11 GND GSM Tx1 (900M) 16 17 18 19 VQFN-30P PKG 20 21 Top View 22 23 24 10 Ant2 (Ext) GND GND GND GND 9 8 7 6 5 4 3 2 1 GND Ant1 GND TRx1 (UMTS800M) TRx4 (UMTS2G) TRx3 (UMTS1.7G) TRx2 (UMTS1.5G) GND CTLG GND GSM Rx1 (850M) GSM Rx2 (900M) GSM Rx3 (1.8G) GSM Rx4 (1.9G) (3.4mm × 4.0mm × 0.85mm Max.) GND VDD 25 26 27 28 CTLB CTLC CTLD CTLE 29 CTLA -4- CTLF 30 CXM3525ER Truth Table GSM/ GSM GSM GSM UMTS UMTS ANT/ UMTS BAND1 BAND2 Tx/Rx BAND1 BAND2 EXT State CTLA CTLB CTLC CTLD CTLE CTLF CTLG 1 2 3 4 5 6 7 H H H H H H L L L H H L H — L H L H — — — L L L L H H — — — — — — — L — — — — — — H H H H H H H H Active Port GSM Rx1 GSM Rx2 GSM Rx3 GSM Rx4 GSM Tx1 GSM Tx2 TRx1 (UMTS800M) TRx2 (UMTS1.5G) TRx3 (UMTS1.7G) TRx4 (UMTS2G) GSM Rx1 GSM Rx2 GSM Rx3 GSM Rx4 GSM Tx1 GSM Tx2 Active Ant ANT1 ANT1 ANT1 ANT1 ANT1 ANT1 ANT1 F1 F2 F3 F4 F5 ON F6 F7 F8 F9 ON ON ON ON F10 F11 F12 F13 F14 F15 F16 F17 F18 OFF OFF OFF OFF OFF OFF OFF ON OFF OFF ON OFF ON OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF ON OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF ON OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF ON OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF 8 L — — — H L H ANT1 OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF ON OFF OFF OFF OFF OFF 9 L — — — H H H ANT1 OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF ON OFF OFF OFF 10 11 12 13 14 15 16 17 L H H H H H H L — L L H H L H — — L H L H — — — — L L L L H H — L — — — — — — L L — — — — — — H H L L L L L L L ANT1 OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF ON OFF OFF OFF OFF ON OFF OFF OFF ON OFF OFF ON OFF ON ON ON ON ON OFF ANT2 (EXT) OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF ANT2 (EXT) OFF OFF OFF OFF OFF ANT2 (EXT) OFF OFF OFF OFF OFF OFF ANT2 (EXT) OFF OFF OFF OFF OFF OFF OFF ANT2 (EXT) OFF ON OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF ON OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF ON OFF OFF OFF OFF OFF OFF ANT2 (EXT) OFF OFF OFF TRx1 ANT2 (EXT) OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF (UMTS800M) 18 L — — — H L L TRx2 ANT2 (EXT) OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF (UMTS1.5G) ON OFF OFF OFF OFF 19 L — — — H H L TRx3 ANT2 (EXT) OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF (UMTS1.7G) TRx4 (UMTS2G) ON OFF OFF 20 L — — — L L L ANT2 (EXT) OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF ON GSM/ GSM GSM GSM UMTS UMTS ANT/ UMTS BAND1 BAND2 Tx/Rx BAND1 BAND2 EXT State CTLA CTLB CTLC CTLD CTLE CTLF CTLG 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 H H H H H H L L L L H H H H H H L L L L L L H H L H — — — — L L H H L H — — — — L H L H — — — — — — L H L H — — — — — — L L L L H H — — — — L L L L H H — — — — — — — — — — L H H L — — — — — — L H H L — — — — — — H L H L — — — — — — H L H L H H H H H H H H H H L L L L L L L L L L Active Port GSM Rx1 GSM Rx2 GSM Rx3 GSM Rx4 GSM Tx1 GSM Tx2 TRx1 (UMTS800M) TRx2 (UMTS1.5G) TRx3 (UMTS1.7G) TRx4 (UMTS2G) GSM Rx1 GSM Rx2 GSM Rx3 GSM Rx4 GSM Tx1 GSM Tx2 Active Ant ANT1 ANT1 ANT1 ANT1 ANT1 ANT1 ANT1 ANT1 ANT1 ANT1 F19 ON ON ON ON OFF ON ON ON ON ON F20 ON ON ON ON ON OFF ON ON ON ON ON ON ON ON ON OFF ON ON ON ON F21 OFF OFF OFF OFF ON ON ON ON ON ON OFF OFF OFF OFF ON ON ON ON ON ON F22 ON ON ON ON ON ON OFF ON ON ON ON ON ON ON ON ON OFF ON ON ON F23 ON ON ON ON ON ON ON OFF ON ON ON ON ON ON ON F24 ON ON ON ON ON ON ON ON OFF ON ON ON ON ON ON F25 ON ON ON ON ON ON ON ON ON F26 OFF OFF OFF OFF OFF OFF OFF OFF OFF F27 ON ON ON ON ON ON ON ON ON ON OFF OFF OFF OFF OFF OFF F27 ON ON ON ON ON ON F29 ON ON ON ON ON ON F30 OFF OFF OFF OFF F31 ON ON ON ON F32 ON ON ON ON ON OFF ON ON ON ON ON ON ON ON ON OFF ON ON ON ON OFF OFF OFF ON ON ON ON ON ON ON ON ON OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF ON ON ON ON ON ON ON ON ON ON ON ON OFF OFF OFF OFF OFF OFF ON ON ON ON ON ON ON ON ON OFF ON ON ON ON ON ON ON ON ON ON ANT2 (EXT) ON ANT2 (EXT) ON ANT2 (EXT) ON ANT2 (EXT) ON ANT2 (EXT) OFF ANT2 (EXT) ON OFF OFF OFF ON ON ON ON ON ON ON ON ON OFF OFF ON OFF ON ON ON ON OFF ON TRx1 (UMTS800M) ANT2 (EXT) ON TRx2 (UMTS1.5G) ANT2 (EXT) ON TRx3 (UMTS1.7G) ANT2 (EXT) ON TRx4 (UMTS2G) ANT2 (EXT) ON OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF -5- CXM3525ER Electrical Characteristics DC Bias Conditions (Ta = 25°C) Symbol VDD Vctl (H) Vctl (L) Min. 2.5 1.5 0 Typ. 2.8 1.8 — Max. 3.3 3.3 0.3 Unit V V V Target Specification (Ta = 25°C) Item Switching time Start up time Control current Supply current Symbol Tsw Tst Ictl IDD Active mode VDD = 0 to 2.8V Conditions Min. — — — — Typ. 3 6 0.01 0.30 Max. 5 50 5 0.45 Unit μs μs μA mA (VDD = 2.8V, Vctl = 1.8V/0V) Item Symbol Path Ant/Ext-Tx1 Ant/Ext-Tx2 Ant/Ext-Rx1 Ant/Ext-Rx2 *1 *2 *3 *3 *4 *4 *5 *6 *7 *8 Condition Ant Active Min. — — — — — — — — — — — Typ. 1.10 1.05 1.07 1.10 1.35 1.40 0.40 0.45 0.65 0.80 1.2 — 25 25 20 25 25 32 36 28 33 31 Max. 1.25 1.20 1.22 1.25 1.50 1.55 0.55 0.60 0.80 0.95 — – 125 — — — — — 25 25 20 24 24 — — — — — — — — — — — Ext Active Min. Typ. 1.10 1.05 1.03 1.05 1.25 1.20 0.50 0.60 0.83 0.90 1.2 — 30 33 28 30 29 Max. 1.25 1.20 1.18 1.20 1.40 1.35 0.65 0.75 0.98 1.05 — – 125 — — — — — Unit Insertion loss IL Ant/Ext-Rx3 Ant/Ext-Rx4 Ant/Ext-TRx1 Ant/Ext-TRx2 Ant/Ext-TRx3 Ant/Ext-TRx4 dB VSWR Rx band sprious VSWR SPR All ports in active paths Ant/ExtTRx1, 2, 3, 4 824 to 2170MHz *3, *4 — dBm 1648 to 1830MHz Tx1-Ant/Ext 2472 to 2745MHz 3296 to 3660MHz Tx2-Ant/Ext 3420 to 3820MHz 5130 to 5730MHz Attenuation ATT dB Electrical characteristics are measured with all RF ports terminated in 50Ω. -6- CXM3525ER Item Symbol 2fo 3fo 2fo 3fo 2fo 3fo 2fo 3fo 2fo 3fo 2fo 3fo ±5MHz ±10MHz ±5MHz ±10MHz ±5MHz ±10MHz ±5MHz ±10MHz Path Tx1-Ant/Ext Tx2-Ant/Ext TRx1-Ant/Ext TRx2-Ant/Ext TRx3-Ant/Ext TRx4-Ant/Ext TRx1-Ant/Ext TRx2-Ant/Ext TRx3-Ant/Ext TRx4-Ant/Ext Condition *1 Ant Active Min. — — — — — — — — — — — — — — — — — — — — Typ. –46 –44 –52 –47 –68 –65 –63 –65 –68 –65 –67 –65 — — — — — — — — Max. –36 –36 –36 –36 –36 –36 –36 –36 –36 –36 –36 –36 –50 –55 –50 –55 –50 –55 –50 –55 Min. — — — — — — — — — — — — — — — — — — — — Ext Active Typ. –43 –44 –50 –47 –63 –65 –63 –65 –63 –65 –63 –65 — — — — — — — — Max. –36 –36 –36 –36 –36 –36 –36 –36 –36 –36 –36 –36 –50 –55 –50 –55 –50 –55 –50 –55 Unit *2 *5 Harmonics*** dBm *6 *7 *8 *5 *6 ACLR*** dBc *7 *8 Electrical characteristics are measured with all RF ports terminated in 50Ω. *1 *2 *3 *4 *5 *6 *7 *8 Pin on Tx1: 35dBm, 824 to 915MHz, VDD = 2.8V, Tx1 enabled Pin on Tx2: 32dBm, 1710 to 1910MHz, VDD = 2.8V, Tx2 enabled Pin on Ant: 10dBm, 869 to 960MHz, VDD = 2.8V, Rx1 or Rx2 enabled Pin on Ant: 10dBm, 1805 to 1990MHz, VDD = 2.8V, Rx3 or Rx4 enabled Pin on TRx1: 26dBm, 824 to 894MHz, VDD = 2.8V, TRx1 enabled Pin on TRx2: 26dBm, 1428 to 1496MHz, VDD = 2.8V, TRx2 enabled Pin on TRx3: 26dBm, 1750 to 1880MHz, VDD = 2.8V, TRx3 enabled Pin on TRx4: 26dBm, 1920 to 2170MHz, VDD = 2.8V, TRx4 enabled Item Symbol Path Tx1-Rx1, 2, 3, 4 Tx1-TRx2, 3, 4 Condition Tx1-Ant/Ext Active Freq. = Tx1_Band Tx1-Ant/Ext Active Freq. = Tx1_Band Tx1-Ant/Ext Active Freq. = Tx1_Band Tx2-Ant/Ext Active Freq. = Tx2_Band Tx2-Ant/Ext Active Freq. = Tx2_Band Tx2-Ant/Ext Active Freq. = Tx2_Band Rx1, 2 Active Freq. = Tx1_Band Rx1, 2 Active Freq. = Tx1_Band Rx3, 4 Active Freq. = Tx2_Band Rx3, 4 Active Freq. = Tx2_Band Tx1 Active Freq. = Tx1_Band Tx2 Active Freq. = Tx2_Band Min. 30 25 30 30 17 25 25 25 20 20.5 17 20 Typ. 54 33 49 54 21 32 31 33 24 24.5 20 24 Max. — — — — — — — — — — — — Unit ISO1 Tx1-TRx1 Tx2-Rx1, 2, 3, 4 Tx2-TRx1, 2, 4 Tx2-TRx3 Tx1-Ant Tx1-Ext Tx2-Ant Tx2-Ext Isolation ISO2 dB ISO3 Tx1-Tx2 -7- CXM3525ER Item Symbol Path Condition *9, *25 *10, *25 *11, *25 *12, *25 *13, *25 *14, *25 *15, *25 *16, *25 *17, *25 *18, *25 *19, *25 *20, *25 *21, *25 *22, *25 *23, *25 *24, *25 Ant Active Min. — — — — — — — — — — — — — — — — Ext Active Min. — — — — — — — — — — — — — — — — Typ. –124 –120 –119 –111 –111 –118 –106 –110 –111 –114 –110 –112 –108 –115 –110 –116 Max. –110 –110 –109 –105 –105 –108 –102 –105 –105 –105 –105 –105 –104 –105 –105 –106 Typ. –124 –116 –120 –111 –111 –107 –106 –113 –109 –111 –108 –108 –109 –108 –109 –114 Max. –110 –106 –110 –105 –105 –102 –102 –105 –105 –105 –104 –103 –105 –103 –105 –105 Unit TRx1-Ant/Ext TRx2-Ant/Ext IMD2 TRx3-Ant/Ext Intermodulation distortion level in Rx band TRx4-Ant/Ext dBm TRx1-Ant/Ext TRx2-Ant/Ext IMD3 TRx3-Ant/Ext TRx4-Ant/Ext Electrical characteristics are measured with all RF ports terminated in 50Ω. *9 *10 *11 *12 *13 *14 *15 *16 *17 *18 *19 *20 *21 *22 *23 *24 *25 TRx port: 21.5dBm, 835MHz, Ant port: –15dBm, 45MHz, VDD = 2.8V TRx port: 21.5dBm, 835MHz, Ant port: –15dBm, 1715MHz, VDD = 2.8V TRx port: 21.5dBm, 1438MHz, Ant port: –15dBm, 48MHz, VDD = 2.8V TRx port: 21.5dBm, 1438MHz, Ant port: –15dBm, 2924MHz, VDD = 2.8V TRx port: 21.5dBm, 1765MHz, Ant port: –15dBm, 95MHz, VDD = 2.8V TRx port: 21.5dBm, 1765MHz, Ant port: –15dBm, 3625MHz, VDD = 2.8V TRx port: 21.5dBm, 1950MHz, Ant port: –15dBm, 190MHz, VDD = 2.8V TRx port: 21.5dBm, 1950MHz, Ant port: –15dBm, 4090MHz, VDD = 2.8V TRx port: 21.5dBm, 835MHz, Ant port: –15dBm, 790MHz, VDD = 2.8V TRx port: 21.5dBm, 835MHz, Ant port: –15dBm, 2550MHz, VDD = 2.8V TRx port: 21.5dBm, 1438MHz, Ant port: –15dBm, 1390MHz, VDD = 2.8V TRx port: 21.5dBm, 1438MHz, Ant port: –15dBm, 4362MHz, VDD = 2.8V TRx port: 21.5dBm, 1765MHz, Ant port: –15dBm, 1670MHz, VDD = 2.8V TRx port: 21.5dBm, 1765MHz, Ant port: –15dBm, 5390MHz, VDD = 2.8V TRx port: 21.5dBm, 1950MHz, Ant port: –15dBm, 1760MHz, VDD = 2.8V TRx port: 21.5dBm, 1950MHz, Ant port: –15dBm, 6040MHz, VDD = 2.8V Measured with recommended circuit -8- CXM3525ER DC Bias Conditions (Ta = –30 to +85°C) Symbol VDD Vctl (H) Vctl (L) Min. 2.5 1.5 0 Typ. 2.8 1.8 — Max. 3.3 3.3 0.3 Unit V V V Target Specification (Ta = –30 to +85°C) Item Switching time Start up time Control current Supply current Symbol Tsw Tst Ictl IDD Active mode VDD = 0 to 2.8V Conditions Min. — — — — Typ. 3 6 0.01 0.30 Max. 5 50 5 0.60 Unit μs μs μA mA (VDD = 2.8V, Vctl = 1.8V/0V) Item Symbol Path Ant/Ext-Tx1 Ant/Ext-Tx2 Ant/Ext-Rx1 Ant/Ext-Rx2 *1 *2 *3 *3 *4 *4 *5 *6 *7 *8 Condition Ant Active Min. — — — — — — — — — — — Ext Active Min. — — — — — — — — — — — Typ. — — — — — — — — — — 1.2 — Max. 1.35 1.30 1.32 1.35 1.60 1.65 0.65 0.70 0.90 1.05 — –125 — — — — — Typ. — — — — — — — — — — 1.2 — Max. 1.35 1.30 1.28 1.30 1.50 1.45 0.75 0.85 1.08 1.15 — –125 — — — — — Unit Insertion loss IL Ant/Ext-Rx3 Ant/Ext-Rx4 Ant/Ext-TRx1 Ant/Ext-TRx2 Ant/Ext-TRx3 Ant/Ext-TRx4 dB VSWR Rx band sprious VSWR SPR All ports in active paths Ant/ExtTRx1, 2, 3, 4 824 to 2170MHz *3, *4 — dBm 1648 to 1830MHz Tx1-Ant/Ext 2472 to 2745MHz 3296 to 3660MHz Tx2-Ant/Ext 3420 to 3820MHz 5130 to 5730MHz 25 25 20 25 25 — — — — — 25 25 20 24 24 — — — — — Attenuation ATT dB Electrical characteristics are measured with all RF ports terminated in 50Ω. -9- CXM3525ER Item Symbol 2fo 3fo 2fo 3fo 2fo 3fo 2fo 3fo 2fo 3fo 2fo 3fo ±5MHz ±10MHz ±5MHz ±10MHz ±5MHz ±10MHz ±5MHz ±10MHz Path Tx1-Ant/Ext Tx2-Ant/Ext TRx1-Ant/Ext TRx2-Ant/Ext TRx3-Ant/Ext TRx4-Ant/Ext TRx1-Ant/Ext TRx2-Ant/Ext TRx3-Ant/Ext TRx4-Ant/Ext Condition *1 Ant Active Min. — — — — — — — — — — — — — — — — — — — — Typ. — — — — — — — — — — — — — — — — — — — — Max. –33 –33 –33 –33 –36 –36 –36 –36 –36 –36 –36 –36 –50 –55 –50 –55 –50 –55 –50 –55 Min. — — — — — — — — — — — — — — — — — — — — Ext Active Typ. — — — — — — — — — — — — — — — — — — — — Max. –33 –33 –33 –33 –36 –36 –36 –36 –36 –36 –36 –36 –50 –55 –50 –55 –50 –55 –50 –55 Unit *2 *5 Harmonics*** dBm *6 *7 *8 *5 *6 ACLR*** dBc *7 *8 Electrical characteristics are measured with all RF ports terminated in 50Ω. *1 *2 *3 *4 *5 *6 *7 *8 Pin on Tx1: 35dBm, 824 to 915MHz, VDD = 2.8V, Tx1 enabled Pin on Tx2: 32dBm, 1710 to 1910MHz, VDD = 2.8V, Tx2 enabled Pin on Ant: 10dBm, 869 to 960MHz, VDD = 2.8V, Rx1 or Rx2 enabled Pin on Ant: 10dBm, 1805 to 1990MHz, VDD = 2.8V, Rx3 or Rx4 enabled Pin on TRx1: 26dBm, 824 to 894MHz, VDD = 2.8V, TRx1 enabled Pin on TRx2: 26dBm, 1428 to 1496MHz, VDD = 2.8V, TRx2 enabled Pin on TRx3: 26dBm, 1750 to 1880MHz, VDD = 2.8V, TRx3 enabled Pin on TRx4: 26dBm, 1920 to 2170MHz, VDD = 2.8V, TRx4 enabled Item Symbol Path Tx1-Rx1, 2, 3, 4 Tx1-TRx2, 3, 4 Condition Tx1-Ant/Ext Active Freq. = Tx1_Band Tx1-Ant/Ext Active Freq. = Tx1_Band Tx1-Ant/Ext Active Freq. = Tx1_Band Tx2-Ant/Ext Active Freq. = Tx2_Band Tx2-Ant/Ext Active Freq. = Tx2_Band Tx2-Ant/Ext Active Freq. = Tx2_Band Rx1, 2 Active Freq. = Tx1_Band Rx1, 2 Active Freq. = Tx1_Band Rx3, 4 Active Freq. = Tx2_Band Rx3, 4 Active Freq. = Tx2_Band Tx1 Active Freq. = Tx1_Band Tx2 Active Freq. = Tx2_Band Min. 30 25 30 30 14 25 25 25 17 17.5 16 19 Typ. — — — — — — — — — — — — Max. — — — — — — — — — — — — Unit ISO1 Tx1-TRx1 Tx2-Rx1, 2, 3, 4 Tx2-TRx1, 2, 4 Isolation ISO2 Tx2-TRx3 Tx1-Ant Tx1-Ext Tx2-Ant Tx2-Ext dB ISO3 Tx1-Tx2 - 10 - CXM3525ER Item Symbol Path Condition *9, *25 *10, *25 *11, *25 *12, *25 *13, *25 *14, *25 *15, *25 *16, *25 *17, *25 *18, *25 *19, *25 *20, *25 *21, *25 *22, *25 *23, *25 *24, *25 Ant Active Min. — — — — — — — — — — — — — — — — Typ. — — — — — — — — — — — — — — — — Max. –107 –107 –106 –102 –102 –105 –99 –102 –102 –102 –102 –102 –101 –102 –102 –103 Min. — — — — — — — — — — — — — — — — Ext Active Typ. — — — — — — — — — — — — — — — — Max. –107 –103 –107 –102 –102 –99 –99 –102 –102 –102 –101 –100 –102 –100 –102 –102 Unit TRx1-Ant/Ext TRx2-Ant/Ext IMD2 TRx3-Ant/Ext Intermodulation distortion level in Rx band TRx4-Ant/Ext dBm TRx1-Ant/Ext TRx2-Ant/Ext IMD3 TRx3-Ant/Ext TRx4-Ant/Ext Electrical characteristics are measured with all RF ports terminated in 50Ω. *9 *10 *11 *12 *13 *14 *15 *16 *17 *18 *19 *20 *21 *22 *23 *24 *25 TRx port: 21.5dBm, 835MHz, Ant port: –15dBm, 45MHz, VDD = 2.8V TRx port: 21.5dBm, 835MHz, Ant port: –15dBm, 1715MHz, VDD = 2.8V TRx port: 21.5dBm, 1438MHz, Ant port: –15dBm, 48MHz, VDD = 2.8V TRx port: 21.5dBm, 1438MHz, Ant port: –15dBm, 2924MHz, VDD = 2.8V TRx port: 21.5dBm, 1765MHz, Ant port: –15dBm, 95MHz, VDD = 2.8V TRx port: 21.5dBm, 1765MHz, Ant port: –15dBm, 3625MHz, VDD = 2.8V TRx port: 21.5dBm, 1950MHz, Ant port: –15dBm, 190MHz, VDD = 2.8V TRx port: 21.5dBm, 1950MHz, Ant port: –15dBm, 4090MHz, VDD = 2.8V TRx port: 21.5dBm, 835MHz, Ant port: –15dBm, 790MHz, VDD = 2.8V TRx port: 21.5dBm, 835MHz, Ant port: –15dBm, 2550MHz, VDD = 2.8V TRx port: 21.5dBm, 1438MHz, Ant port: –15dBm, 1390MHz, VDD = 2.8V TRx port: 21.5dBm, 1438MHz, Ant port: –15dBm, 4362MHz, VDD = 2.8V TRx port: 21.5dBm, 1765MHz, Ant port: –15dBm, 1670MHz, VDD = 2.8V TRx port: 21.5dBm, 1765MHz, Ant port: –15dBm, 5390MHz, VDD = 2.8V TRx port: 21.5dBm, 1950MHz, Ant port: –15dBm, 1760MHz, VDD = 2.8V TRx port: 21.5dBm, 1950MHz, Ant port: –15dBm, 6040MHz, VDD = 2.8V Measured with recommended circuit - 11 - CXM3525ER Recommended Circuit Tx2 Ant2 C1 L1 15 14 13 12 11 10 16 9 C1 Tx1 17 8 L1 Ant1 18 7 Rx1 19 6 TRx1 Rx2 20 5 TRx4 Rx3 21 4 TRx3 Rx4 22 3 TRx2 23 2 VDD 24 (Cbypass) 1 (Cbypass) CTLG 25 26 27 28 29 30 (Cbypass) (Cbypass) (Cbypass) (Cbypass) (Cbypass) (Cbypass) CTLA CTLB CTLC CTLD CTLE CTLF ∗1 No DC blocking capacitors are required on all RF ports. ∗2 DC levels of all RF ports are GND. ∗3 C1 (8.2pF) and L1 (22nH) are recommended on Ant ports for IMD2 (Rx-Tx) and ESD protection. - 12 - CXM3525ER Recommended PCB Layout (Via Position) (Unit: mm) 0.76 1pin mark 0.25 1.25 0.95 IC Line PCB Line Via Hole Via Hole (Recommended Position) GND Plate A GND Plate B 0.60 1.05 GND Plate A and GND Plate B must be separated each other. GND impedances of Plate A and Plate B should be as low as possible. GND Terminals of Pin7, 9, 14, 15 must be isolated. And besides not connect to GND Plate A or B. GND Terminals of Pin 2 and 23 must be connected to GND Plate A. GND Terminals of Pin 11, 12 and 18 must be connected to GND Plate B. GND impedances of Pin 14 and 15 are sensitive to attenuation performance. It is recommended the GND inductance of Pin 14 is about 0.5nH. It is recommended the GND inductance of Pin 15 is about 0.69nH. - 13 - 2.45 CXM3525ER Package Outline (Unit: mm) LEAD PLATING SPECIFICATIONS ITEM LEAD MATERIAL SOLDER COMPOSITION PLATING THICKNESS SPEC. COPPER ALLOY Sn-Bi Bi:1-4wt% 5-18µm - 14 - Sony Corporation