CXM3560XR

SP10T Antenna Switch for GSM/UMTS Dual Mode Handsets CXM3560XR Description The CXM3560XR is SP10T antenna switch for GSM/UMTS dual mode handsets. The CXM3560XR has a 1.8V CMOS compatible decoder. The Sony GaAs junction gate pHEMT (JPHEMT) MMIC process is used for low insertion loss and high linearity. (Applications: GSM (4bands) and UMTS (4bands) Dual-Mode Handsets) Features Low Insertion Loss: 0.30dB (Typ.) Tx1 (GSM Low Band Tx) 0.45dB (Typ.) Tx2 (GSM High Band Tx) 0.60dB (Typ.) TRx1 (UMTS Band I) Low Voltage Operation:VDD = 2.5V No DC Blocking Capacitors required on RF ports Small package size: XQFN-24P-02 (2.2mm × 2.9mm × 0.4mm Max.) Lead-Free and RoHS Compliant Structure GaAs Junction Gate pHEMT (JPHEMT) MMIC Switch, CMOS Decoder Absolute Maximum Ratings (Ta = 25°C) Bias voltage Control voltage (CTL-A/B/C/D) Input power max. [Tx1] Input power max. [Tx2] Input power max. [TRx1, 2, 3, 4] Input power max. [Rx1, 2, 3, 4] Operating temperature range Storage temperature range VDD Vctl 4 4 36 34 32 13 –35 to +85 –65 to +150 V V dBm (Duty cycle = 12.5 to 50%) dBm (Duty cycle = 12.5 to 50%) dBm dBm °C °C Note on Handling GaAs MMIC’s are ESD sensitive devices. Special handling precautions are required. Sony reserves the right to change products and specifications without prior notice. This information does not convey any license by any implication or otherwise under any patents or other right. Application circuits shown, if any, are typical examples illustrating the operation of the devices. Sony cannot assume responsibility for any problems arising out of the use of these circuits. -1- E09411 CXM3560XR Block Diagram SP10T Antenna Switch Ant TRx1 TRx2 TRx3 TRx4 Tx1 Decoder Logic Tx2 Rx1 Rx2 Rx3 Rx4 Pin Configuration GND GND 9 12 GND Rx1 Rx2 Rx3 Rx4 TRx1 GND 13 14 15 16 17 18 19 20 VDD 11 10 ANT 8 7 6 GND TRx4 GND TRx3 GND TRx2 GND 5 4 3 2 1 24 CTLA Tx1 24-pin XQFN (2.2mm × 2.9mm × 0.4mm Max.) Top View 21 CTLD 22 CTLC Tx2 23 CTLB -2- CXM3560XR Pin Description Pin No. 1 2 3 4 5 6 7 8 9 10 11 12 GND TRx2 GND TRx3 GND TRx4 GND Ant GND Tx2 (DCS/PCS) GND Tx1 (GSM850/900M) Name Pin No. 13 14 15 16 17 18 19 20 21 22 23 24 GND Rx1 Rx2 Rx3 Rx4 TRx1 GND VDD CTLD CTLC CTLB CTLA Name -3- CXM3560XR RF Switch Ant F1 F2 F9 F14 F10 F7 F16 F18 F20 F3 F4 F5 F6 F17 F19 F21 Tx1 Tx2 Rx1 Rx2 Rx3 Rx4 TRx1 TRx2 TRx3 TRx4 Truth Table Active Path Tx1 Tx2 Rx1 Rx2 Rx3 Rx4 TRx1 TRx2 TRx3 TRx4 Vctl State A B C D F1 F2 L F3 L L F4 L L L H L L L L L F5 L L L L F6 L L L L State 1 2 Switch State F7 L L L L L L H L L F9 F10 F14 F16 F17 F18 F19 F20 F21 H H L L L L H H H H H L L L H H L H L H L L L H H L H H H H L L L L L L L L H H H L L L L L L L L L H L H H H H H L L L L L L L L L L L L L H H H H H H H H L H H L L L L L L L L H H H H H H H H L H L L L L L L L L L H H H H H H H H H H L H L L L L L L L 3 4 5 6 7 H L L L L L L L H H H H L L L L H L L L L L L H L L L H H H H H H H 8 9 10 H H L L H L L L L L -4- CXM3560XR Electrical Characteristics Supply Voltage Value (Ta = 25°C) Item Bias voltage (VDD) Min. +2.5 Typ. +2.65 Max. +3.3 Unit V Logic Value (Ta = 25°C) Item Control voltage (CTL-A/B/C/D) State High Low Min. +1.5 0 Typ. +1.8 — Max. +3.3 +0.3 Unit V -5- CXM3560XR Specification 1 (Ta = 25°C, VDD = 2.5V, Vctl = 1.5V) Item Symbol Ant-Tx1 Ant-Tx2 Ant-Rx1 Ant-Rx2 Ant-Rx3 Ant-Rx4 Ant-TRx1 Insertion loss IL Ant-TRx2 Port *1 *2 *3 *4 *3 *4 *3 *4 *3 *4 *5 *6 *5 *6 *7 *8 *9 *10 *7 Condition Ant-TRx3 *8 *9 *10 *7 Ant-TRx4 VSWR VSWR 2fo 3fo 2fo 3fo 2fo 3fo 2fo 3fo 2fo 3fo 2fo 3fo All ports in Active Paths Tx1-Ant Tx2-Ant TRx1-Ant TRx2-Ant TRx3-Ant TRx4-Ant *8 *9 *10 824 to 2170MHz *1 *2 *5 Harmonics *7,*9 *7,*9 *7 Min. — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — Typ. 0.30 0.45 0.75 1.00 0.75 1.00 0.75 1.00 0.75 1.00 0.55 0.60 0.60 0.68 0.45 0.45 0.57 0.60 0.45 0.45 0.60 0.62 0.40 0.40 0.65 0.66 1.20 –50 –40 –45 –40 –55 –54 –65 –58 –65 –58 –65 –58 Max. 0.45 0.60 0.90 1.15 0.90 1.15 0.90 1.15 0.90 1.15 0.70 0.75 0.75 0.83 0.60 0.60 0.72 0.75 0.60 0.60 0.75 0.77 0.55 0.55 0.80 0.81 — –36 –35 –36 –33 –39 –39 –39 –39 –39 –39 –39 –39 Unit dB — dBm -6- CXM3560XR Item Symbol TRx1-Ant TRx2-Ant IMD2 TRx3-Ant Port Condition *11, *19 *12, *19 *13, *19 *14, *19 *12, *19 *13, *19 *14, *19 *14, *19 *15, *19 *16, *19 *17, *19 *18, *19 *16, *19 Inter modulation product power in Rx band TRx4-Ant TRx1-Ant TRx2-Ant IMD3 TRx3-Ant TRx4-Ant *17, *19 *18, *19 *18, *19 Switching time Control current Supply current Ts Ictl Idd 50%Ctl to 90%RF Vctl = 1.80V VDD = 2.65V Min. — — — — — — — — — — — — — — — — — — — Typ. –105 –105 –105 –105 –105 –105 –105 –105 –105 –105 –105 –105 –105 –105 –105 –105 3 1 0.18 Max. –97 –97 –97 –97 –97 –97 –97 –97 –97 –97 –97 –97 –97 –97 –97 –97 5 5 0.40 Unit dBm μS μA mA Electrical Characteristics are measured with all RF ports terminated in 50Ω. *1 *2 *3 *4 *5 *6 *7 *8 *9 *10 *11 *12 *13 *14 *15 *16 *17 *18 *19 Pin on Tx1: 34dBm, 824 to 915MHz, Tx1 enabled Pin on Tx2: 32dBm, 1710 to 1910MHz, Tx2 enabled Pin on Ant: 10dBm, 869 to 960MHz, Rx1, Rx2, Rx3 or Rx4 enabled Pin on Ant: 10dBm, 1805 to 1990MHz, Rx1, Rx2, Rx3 or Rx4 enabled Pin on TRx1 or TRx2: 26dBm, 1920 to 1980MHz, TRx1 or TRx2 enabled Pin on Ant: 10dBm, 2110 to 2170MHz, TRx1 or TRx2 enabled Pin on TRx2, TRx3 or TRx4: 26dBm, 824 to 849MHz, TRx2, TRx3 or TRx4 enabled Pin on Ant: 10dBm, 869 to 894MHz, TRx2, TRx3 or TRx4 enabled Pin on TRx2, TRx3 or TRx4: 26dBm, 1710 to 1910MHz, TRx2, TRx3 or TRx4 enabled Pin on Ant: 10dBm, 1805 to 1990MHz, TRx2, TRx3 or TRx4 enabled Pin on TRx1: 20dBm, 1950MHz, Pin on Ant: –15dBm, 190MHz, TRx1 enabled Pin on TRx2 or TRx3: 20dBm, 1745MHz, Pin on Ant: –15dBm, 95MHz, TRx2 or TRx3 enabled Pin on TRx2 or TRx3: 20dBm, 1880MHz, Pin on Ant: –15dBm, 80MHz, TRx2 or TRx3 enabled Pin on TRx2, TRx3 or TRx4: 20dBm, 835MHz, Pin on Ant: –15dBm, 45MHz, TRx2, TRx3 or TRx4 enabled Pin on TRx1: 20dBm, 1950MHz, Pin on Ant: –15dBm, 1760MHz, TRx1 enabled Pin on TRx2 or TRx3: 20dBm, 1745MHz, Pin on Ant: –15dBm, 1650MHz, TRx2 or TRx3 enabled Pin on TRx2 or TRx3: 20dBm, 1880MHz, Pin on Ant: –15dBm, 1800MHz, TRx2 or TRx3 enabled Pin on TRx2, TRx3 or TRx4: 20dBm, 835MHz, Pin on Ant: –15dBm, 790MHz, TRx2, TRx3 or TRx4 enabled Measured with the recommended circuit -7- CXM3560XR Specification 1-Isolation (Ta = 25°C, VDD = 2.5V, Vctl = 1.5V) Item Symbol Path Active Isolation Tx1-Rx1 Tx1-Rx2 Tx1-Rx3 Tx1-Rx4 Tx1 Tx1-TRx1 Tx1-TRx2 Tx1-TRx3 Tx1-TRx4 Tx1-Tx2 Tx1-Tx2 Tx2-Rx1 Tx2-Rx2 Tx2-Rx3 Isolation ISO Tx2-Rx4 Tx2 Tx2-TRx1 Tx2-TRx2 Tx2-TRx3 Tx2-TRx4 Tx2-Tx1 TRx1-Rx1 TRx1-Rx2 TRx1-Rx3 TRx1-Rx4 TRx1 TRx1-TRx2 TRx1-TRx3 TRx1-TRx4 TRx1-Tx1 TRx1-Tx2 1920 to 1980MHz 1710 to 1910MHz 1648 to 1830MHz 824 to 915MHz Condition Min. 35 35 35 35 25 25 25 25 25 18 35 35 35 35 20 20 20 20 16 30 30 30 20 27 23 23 17 20 Typ. 50 55 55 55 30 48 50 35 35 25 55 55 55 45 23 38 40 30 19 53 48 40 24 35 40 30 19 33 Max. — — — — — — — — — — — — — — — — — — — — — — — — — — — — dB Unit -8- CXM3560XR Item Symbol Path Active Isolation TRx2-Rx1 TRx2-Rx2 TRx2-Rx3 TRx2-Rx4 TRx2-TRx1 TRx2-TRx3 TRx2-TRx4 TRx2-Tx1 TRx2 TRx2-Tx2 TRx2-Rx1 TRx2-Rx2 TRx2-Rx3 TRx2-Rx4 TRx2-TRx1 TRx2-TRx3 TRx2-TRx4 TRx2-Tx1 TRx2-Tx2 TRx3-Rx1 TRx3-Rx2 TRx3-Rx3 TRx3-Rx4 Condition Min. 30 30 30 30 Typ. 62 62 62 55 30 30 35 27 45 58 58 55 45 23 24 28 19 34 62 62 62 57 30 35 32 26 45 57 58 55 45 23 29 25 19 33 62 62 62 57 30 42 35 27 45 Max. — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — Unit 824 to 849MHz 20 20 20 20 20 30 30 30 30 1710 to 1910MHz 18 18 18 17 20 30 30 30 30 Isolation ISO TRx3-TRx1 TRx3-TRx2 TRx3-TRx4 TRx3-Tx1 TRx3 TRx3-Tx2 TRx3-Rx1 TRx3-Rx2 TRx3-Rx3 TRx3-Rx4 TRx3-TRx1 TRx3-TRx2 TRx3-TRx4 TRx3-Tx1 TRx3-Tx2 TRx4-Rx1 TRx4-Rx2 TRx4-Rx3 TRx4-Rx4 TRx4 TRx4-TRx1 TRx4-TRx2 TRx4-TRx3 TRx4-Tx1 TRx4-Tx2 824 to 849MHz 20 20 20 20 20 30 30 30 30 dB 1710 to 1910MHz 18 18 18 17 20 35 35 35 35 824 to 849MHz 20 35 30 20 30 Electrical Characteristics are measured with all RF ports terminated in 50Ω. -9- CXM3560XR Recommended Circuit ANT C1 L1 9 8 7 6 24-pin XQFN (2.2mm × 2.9mm × 0.4mm Max.) Top View 5 4 3 2 1 20 C2 Tx1 12 13 Rx1 Rx2 Rx3 Rx4 TRx1 14 15 16 17 18 19 11 10 Tx2 TRx4 TRx3 TRx2 21 C2 22 C2 23 C2 24 C2 100pF VDD CTLD CTLC CTLB Note) 1. No DC blocking Capacitors are required on all RF ports. 2. DC levels of all RF ports are GND. 3. L1 Inductor(22nH) and C1 Capacitor(22pF) are recommended on Ant port for ESD protection. 4. C2 Capacitor (100pF) is recommended. - 10 - CTLA CXM3560XR PCB Layout Template XQFN-24P-02 Macro for MMIC (Reference) Specification • PKG size: • Terminal pitch: • Terminal length: • Mask thickness: 2.9mm × 2.2mm t0.35mm 0.35mm 0.25mm 0.11mm 3.3 2.9 (PKG size) 1.8 2.2 (PKG size) 2.6 1.1 0.35 4- R0 .2 Detail A 0.28 R0.05 0.2 0.28 0.2 R0.05 C0.1 C0.05 0.5 0.25 PKG Outline 0.2 0.35 Detail A : Land area : Board resist open area : PKG outline : Mask open area (Solder printing area) : Metal area in board (GND plane is recommended.) - 11 - CXM3560XR Package Outline (Unit: mm) LEAD PLATING SPECIFICATIONS ITEM LEAD MATERIAL SOLDER COMPOSITION PLATING THICKNESS SPEC. COPPER ALLOY Sn-Bi Bi:1-4wt% 5-18µm - 12 - Sony Corporation