CXP86400

CXP86400/86490 CMOS 8-bit Single Chip Microcomputer Description The CXP86400/86490 are CMOS 8-bit single chip microcomputers that serve as both piggyback and evaluator. The CXP86400/86490 are developed for evaluating the function of the CXP86440/86448/86460. Note that the CXP86400 corresponds to the fixed font and the CXP86490 corresponds to the custom font respectively. 64 pin PQFP (Ceramic) Piggyback/ evaluator type 64 pin PSDIP (Ceramic) Features • A wide instruction set (213 instructions) which covers various types of data Structure – 16-bit operation/multiplication and division/ Boolean Silicon gate CMOS IC bit operation instructions • Minimum instruction cycle 250ns at 16MHz operation 122µs at 32kHz operation • Applicable EPROM LCC type 27C512 (Maximum 60K bytes are available.) • Incorporated RAM 1536 bytes (Excludes VRAM for on-screen display and sprite RAM) • EPROM for custom font (CXP86490 only) LCC27C512 (Maximum 12K bytes are available.) • Peripheral functions – A/D converter 8 bits, 6 channels, successive approximation method (Conversion time of 1.6µs at 16MHz) – Serial interface 8-bit clock sync type, 1 channel – Timer 8-bit timer 8-bit timer/counter 19-bit time base timer 32kHz timer/ counter – On-screen display (OSD) 12 × 16 dots, 384 character types, 15 character colors, 24 characters × 2 lines frame background 8 colors/half blanking background on full screen 15 colors/half blanking edging/shadowing/rounding for every line background with shadow for every character/ double scanning sprite OSD; 12 × 16 dots, 1 screen, 8 colors for every dot – I2C bus interface – PWM output 8 bits, 8 channels 14 bits, 1 channel – Remote control reception circuit 8-bit pulse measurement counter, 6-stage FIFO – HSYNC counter – Watchdog timer • Interruption 13 factors, 13 vectors, multi-interruption possible • Standby mode SLEEP • Package CXP86400 64-pin ceramic PQFP CXP86490 64-pin ceramic PSDIP (Supports custom font) Note) Mask option depends on the type of the CXP86400/86490. Refer to the Product List for details. Perchase of Sony's I2C components conveys a licence under the Philips I2C Patent Rights to use these components in an I2C system, provided that the system conforms to the I2C Standard Specifications as defined by Philips. Sony reserves the right to change products and specifications without prior notice. This information does not convey any license by any implication or otherwise under any patents or other right. Application circuits shown, if any, are typical examples illustrating the operation of the devices. Sony cannot assume responsibility for any problems arising out of the use of these circuits. –1– E96643-PS CXP86400/86490 CXP86400 Pin Assignment in Piggyback Mode (Top View) PC6/PWM6 PC7/PWM7 PD6/RMC PD7/EC PC0 64 HS1/PD5 HS0/PD4 SI/PD3 SO/PD2 SCK/PD1 INT2/PD0 HSYNC/PA7 VSYNC/PA6 RST VSS XTAL EXTAL PA5/AN5 PA4/AN4 PA3/AN3 PA2/AN2 PA1/AN1 PA0/AN0 PB7 1 2 63 62 61 60 59 PC1 PC2 PC3 PC4 PC5 58 57 56 55 PF0/PWM0 54 53 52 51 50 PF3/PWM3 PF4/SCL0 PF5/SCL1/PWM4 PF6/SDA0 PF7/SDA1/PWM5 PE0/TO/ADJ PE1/PWM PE2/TEX/INT0 PE3/TX VSS VDD NC EXLC XLC PE4/YM PE5/YS PE6/I B G A12 A15 VDD A14 A13 PF1/PWM1 PF2/PWM2 49 48 47 46 A8 A9 A11 NC OE A10 CE D7 D6 39 38 37 36 44 43 42 41 40 45 35 34 33 4 5 6 7 8 9 10 11 12 13 14 15 16 A6 A5 A4 A3 A2 A1 A0 NC D0 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 4 3 2 1 32 31 30 29 28 27 26 25 24 23 22 21 NC A7 3 D1 17 18 19 20 21 22 23 GND NC D2 D3 D4 D5 24 25 26 27 28 29 30 31 32 PG5 Note) 1. NC (Pin 40) is left open. 2. Vss (Pins 10 and 42) are both connected to GND. –2– INT1/PG7 PG6 PG4 PG3 PB6 PB5 PB4 PB3 PB2 PB1 PB0 R CXP86400/86490 CXP86400 Pin Assignment in Evaluator Mode (Top View) PC6/PWM6 PC7/PWM7 PD6/RMC PD7/EC PC0 64 HS1/PD5 HS0/PD4 SI/PD3 SO/PD2 SCK/PD1 INT2/PD0 HSYNC/PA7 VSYNC/PA6 RST VSS XTAL EXTAL PA5/AN5 PA4/AN4 PA3/AN3 PA2/AN2 PA1/AN1 PA0/AN0 PB7 1 2 63 62 61 60 59 PC1 PC2 PC3 PC4 PC5 58 57 56 55 PF0/PWM0 54 53 52 51 50 PF3/PWM3 PF4/SCL0 PF5/SCL1/PWM4 PF6/SDA0 PF7/SDA1/PWM5 PE0/TO/ADJ PE1/PWM PE2/TEX/INT0 PE3/TX VSS VDD NC EXLC XLC PE4/YM PE5/YS PE6/I B G A7/D7 A12 A15 VDD A14 A13 PF1/PWM1 PF2/PWM2 49 48 47 46 A8 A9 A11 NC HALT A10 E/P I/T MON 39 38 37 36 44 43 42 41 40 45 35 34 33 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 A6/D6 A5/D5 A4/D4 A3/D3 A2/D2 A1/D1 A0/D0 NC RD 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 4 3 2 1 32 31 30 29 28 27 26 25 24 23 22 21 NC 3 SYNC GND RST WR NC C2 C1 PG5 Note) 1. NC (Pin 40) is left open. 2. Vss (Pins 10 and 42) are both connected to GND. –3– INT1/PG7 PG6 PG4 PG3 PB6 PB5 PB4 PB3 PB2 PB1 PB0 R CXP86400/86490 CXP86490 Pin Assignment in Piggyback Mode (Top View) NC D0 A1 A0 PC3 PC2 PC1 PC0 EC/PD7 RMC/PD6 HS1/PD5 HS0/PD4 SI/PD3 SO/PD2 SCK/PD1 INT2/PD0 HSYNC/PA7 VSYNC/PA6 RST VSS XTAL EXTAL PA5/AN5 PA4/AN4 PA3/AN3 PA2/AN2 PA1/AN1 PA0/AN0 PB7 PB6 PB5 PB4 PB3 INT1/PG7 PG6 PG5 A2 A3 A4 A5 A6 1 2 3 D1 4 5 6 7 8 9 10 D2 GND NC D3 D4 D5 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 For custom font 13 12 11 10 9 8 7 6 5 4 3 2 1 32 31 30 A7 A12 A15 NC VDD A14 A13 64 63 62 61 60 59 58 57 56 55 PC4 PC5 PC6/PWM6 PC7/PWM7 PF0/PWM0 PF1/PWM1 PF2/PWM2 PF3/PWM3 PF4/SCL0 PF5/SCL1/PWM4 PF6/SDA0 PF7/SDA1/PWM5 PE0/TO/ADJ PE1/PWM PE2/TEX/INT0 PE3/TX VSS VDD NC EXLC XLC PE4/YM PE5/YS PE6/I B G R PB0 PB1 PB2 PG3 PG4 A10 CE D7 A11 D6 OE NC A9 A8 11 54 NC D0 A1 A0 A2 A3 A4 A5 A6 12 13 14 D1 15 16 17 18 19 20 21 D2 GND NC D3 D4 D5 14 15 16 17 18 19 20 53 52 13 12 11 10 9 8 7 6 5 4 3 2 A7 A12 A15 NC VDD A14 A13 51 50 49 48 47 46 45 44 For custom font 1 32 31 30 21 22 23 24 25 26 27 28 29 A10 CE D7 A11 D6 OE NC A9 A8 22 23 24 25 26 27 28 29 30 31 32 D1 D2 GND NC D3 D4 D5 14 15 16 17 18 19 20 43 42 41 NC D0 A1 A0 13 12 11 10 A2 A3 A4 A5 A6 9 8 7 6 5 4 3 2 A7 A12 A15 NC VDD A14 A13 40 39 38 37 36 35 34 33 For programming 1 32 31 30 21 22 23 24 25 26 27 28 29 A10 CE D7 Note) 1. NC (Pin 46) is left open. 2. Vss (Pins 16 and 48) are both connected to GND. –4– A11 D6 OE NC A9 A8 CXP86400/86490 CXP86490 Pin Assignment in Evaluator Mode (Top View) NC D0 A0 PC3 PC2 PC1 PC0 EC/PD7 RMC/PD6 HS1/PD5 HS0/PD4 SI/PD3 SO/PD2 SCK/PD1 INT2/PD0 HSYNC/PA7 VSYNC/PA6 RST VSS XTAL EXTAL PA5/AN5 PA4/AN4 PA3/AN3 PA2/AN2 PA1/AN1 PA0/AN0 PB7 PB6 PB5 PB4 PB3 INT1/PG7 PG6 PG5 A1 A2 A3 A4 A5 A6 1 2 3 4 5 6 7 8 9 D1 D2 GND NC D3 D4 D5 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 For custom font 13 12 11 10 9 8 7 6 5 4 3 2 1 32 31 30 A7 A12 A15 NC VDD A14 A13 64 63 62 61 60 59 58 57 56 PC4 PC5 PC6/PWM6 PC7/PWM7 PF0/PWM0 PF1/PWM1 PF2/PWM2 PF3/PWM3 PF4/SCL0 PF5/SCL1/PWM4 PF6/SDA0 PF7/SDA1/PWM5 PE0/TO/ADJ PE1/PWM PE2/TEX/INT0 PE3/TX VSS VDD NC EXLC XLC PE4/YM PE5/YS PE6/I B G R PB0 PB1 PB2 PG3 PG4 CE D7 A11 D6 NC A9 A8 A10 10 11 12 13 OE 55 54 53 52 D0 NC A0 13 12 11 10 14 15 16 17 18 19 20 D1 D2 GND NC D3 D4 D5 14 15 16 17 18 19 20 A1 A2 A3 A4 9 A5 6 8 7 A6 5 4 3 2 A7 A12 A15 NC VDD A14 A13 51 50 49 48 47 46 45 For custom font 1 32 31 30 21 22 23 24 25 26 27 28 29 CE D7 A10 A11 D6 OE NC A9 A8 21 22 23 24 25 26 27 28 29 30 31 32 WR SYNC GND NC C2 C1 RST 14 15 16 17 18 19 20 44 43 42 41 A0/D0 A1/D1 A2/D2 A3/D3 RD A4/D4 NC A5/D5 A6/D6 13 12 11 10 9 8 7 6 5 4 3 2 40 A7/D7 39 A12 38 A15 NC VDD A14 A13 35 34 33 37 36 For programming 1 32 31 30 21 22 23 24 25 26 27 28 29 E/P MON Note) 1. NC (Pin 46) is left open. 2. Vss (Pins 16 and 48) are both connected to GND. –5– HALT A10 A11 NC A9 A8 I/T CXP86400/86490 EPROM Read Timing (Ta = –20 to +75°C, VDD = 4.5 to 5.5V, Vss = 0V) Item Address → data input delay time Address → data hold time Symbol Pins A0 to A15 D0 to D7 A0 to A15 D0 to D7 0 Min. Max. 75 Unit ns ns tACC tIH 0.8VDD A0 to A15 Address data 0.2VDD tACC tIH 0.8VDD Input data 0.2VDD D0 to D7 Product List Products Optional item Mask CXP86212 CXP86216 CXP86324 CXP86332 CXP86440 CXP86448 CXP86460 CXP86540 CXP86548 CXP86560 Package Oscillation clock ROM capacity Reset pin pull-up resistor Font data 12K bytes 16K bytes 24K bytes 64-pin plastic SDIP/QFP/LQFP 16MHz 32K bytes 40K bytes 48K bytes 60K bytes 40K bytes 48K bytes 60K bytes Existent/Non existent User data Products Optional item Piggyback/evaluator CXP86400-U01Q CXP86490-U01S Package Oscillation clock ROM capacity Reset pin pull-up resistor Font data Fixed 64-pin ceramic PQFP 64-pin ceramic PSDIP 16MHz EPROM 60K bytes Existent EPROM 12K bytes –6– CXP86400/86490 CXP86400 Piggyback mode and evaluator mode can be switched as shown below. Piggyback mode Evaluator mode LCC type EPROM CXP86400 CPU probe Pin 1 marking Pin 1 index EPROM Pin 1 marking Note) Note) Evaluation cap should be connected to the CPU probe. CXP86490 Piggyback mode and evaluator mode can be switched as shown below. LCC type EPROM CXP86490 CPU probe EPROM Pin 1 marking Pin 1 index Two custom font EPROMs (same contents) Note) Evaluation cap should be connected to the CPU probe. Pin 1 marking Piggyback mode Evaluator mode –7– CXP86400/86490 Package Outline CXP86400 Unit: mm 64PIN PQFP (CERAMIC) PIN No. 1 INDEX INDEX 64 18.7 ± 0.5 16.3 ± 0.2 52 52 64 PIN No.1 INDEX 1 51 51 1 1.0 ± 0.05 4.5 22.3 ± 0.25 24.7 ± 0.5 1.27 ± 0.13 0.4 ± 0.08 0.3 18.12 ± 0.2 12.02 14.22 6.0 1.05 0.7 33 19 19 33 1.3 ± 0.3 0.75 20 9.48 11.66 15.58 ± 0.2 32 32 0.6 0.9 20 PACKAGE STRUCTURE PACKAGE MATERIAL SONY CODE EIAJ CODE JEDEC CODE PQFP-64C-L02 AQFP064-C-0000-B LEAD TREATMENT LEAD MATERIAL PACKAGE WEIGHT CERAMIC GOLD PLATING 42 ALLOY 5.2g 3.57 ± 0.36 CXP86490 64PIN PSDIP (CERAMIC) 70.98 ± 0.55 15.58 ± 0.2 64 33 + 0.05 0.15 – 0.02 9.8 MAX 18.57 ± 0.25 1.27 ± 0.13 PIN NO.1 INDEX 1.27 ± 0.25 0.46 ± 0.08 0.9 1.778 ± 0.1 3.43 ± 0.38 11.24 MAX PACKAGE STRUCTURE PACKAGE MATERIAL SONY CODE EIAJ CODE JEDEC CODE PSDIP-64C-02 ADIP064-C-0750-B LEAD TREATMENT LEAD MATERIAL PACKAGE WEIGHT CERAMIC GOLD PLATING 42 ALLOY 22.8g –8– + 0.05 0.25 – 0.02 1 32 19.05 ± 0.25 18.12 ± 0.2 18.12 ± 0.2