0
登录后你可以
  • 下载海量资料
  • 学习在线课程
  • 观看技术视频
  • 写文章/发帖/加入社区
会员中心
创作中心
发布
  • 发文章

  • 发资料

  • 发帖

  • 提问

  • 发视频

创作活动
B-13-155-TDFB-SSC7-40

B-13-155-TDFB-SSC7-40

  • 厂商:

    SOURCE

  • 封装:

  • 描述:

    B-13-155-TDFB-SSC7-40 - 155 Mbps Bi-directional Receptacle Single Fiber Transceiver - Source Photoni...

  • 详情介绍
  • 数据手册
  • 价格&库存
B-13-155-TDFB-SSC7-40 数据手册
155 Mbps Bi-directional Receptacle Single Fiber Transceiver B-15/13-155-TDFB(3)-SSCx-40 Features • Diplexer Single Mode Single Fiber 1x9 SC Receptacle Connector • Wavelength Tx 1550 nm/Rx 1310 nm • SONET OC-3 SDH STM-1 Compliant • Single +5V power Supply • Single +3.3V power Supply • PECL/LVPECL Differential Inputs and Outputs [B-15/13-155-TDFB(3)-SSCx-40] • Wave Solderable and Aqueous Washable • LED Multisourced 1x9 Transceiver Interchangeable • Class 1 Laser Int. Safety Standard IEC 825 Compliant • Uncooled Laser diode with MQW structure DFB Laser • Complies with Telcordia (Bellcore) GR-468-CORE • RoHS compliant Absolute Maximum Rating Parameter Power Supply Voltage Power Supply Voltage Output Current Soldering Temperature Storage Temperature Symbol Vcc Vcc Iout - Min. 0 0 -40 Max. 6 3.6 30 260 85 Unit V V mA ºC ºC Note B-15/13-155-TDFB-SSCx-40 B-15/13-155-TDFB3-SSCx-40 10 seconds on leads only Tstg Recommended Operating Condition Parameter Power Supply Voltage Power Supply Voltage Operating Temperature (Case) Data Rate Transmitter Specifications Parameter Optical Optical Transmit Power Optical Transmit Power Output center Wavelength Output Spectrumt Width Side Mode Suppression Ratio Extinction Ratio Output Eye Optical Rise Time Optical Fall Time Optical Isolation Relative Intensity Noise Total Jitter LUMINENTOIC.COM tr tf - Symbol Vcc Vcc Topr - Min. 4.75 3.1 0 - Typ. 5 3.3 155 Max. 5.25 3.5 70 - Unit V V ºC Mbps Symbol Min Typical Max Unit Notes Output power is coupled into a 9/125 µm single mode fiber , B-15/13-155-TDFB(3)-SSC5-40 Output power is coupled into a 9/125 µm single mode fiber , B-15/13-155-TDFB(3)-SSC7-40 -20dB width CW Po Po λ ∆λ Sr ER -5 -3 1480 30 10 30 - 1550 35 - 0 +3 1580 1 2 2 -116 1.2 dBm dBm nm nm dB dB ns ns dB dB/Hz ns Compliant with ITU-T recommendation G.957/STM-1 10% to 90% Values 10% to 90% Values Isolation potential between 1480-1580nm at least 30dB Measured with 223-1 PRBS with 72 ones and 72 zeros. LUMNDS1887-Jun0308 Rev A.1 RIN TJ 20550 Nordhoff St. • Chatsworth, CA 91311 • tel: 818.773.9044 • fax: 818.576.9486 9F, No 81, Shui Lee Rd. • Hsinchu, Taiwan, R.O.C. • tel: 886.3.5169222 • fax: 886.3.5169213 1 155 Mbps Bi-directional Receptacle Single Fiber Transceiver B-15/13-155-TDFB(3)-SSCx-40 Transmitter Specifications Parameter Electrical Power Supply Current Data Input Current-Low Data Input Current-High Differential Input Voltage Data Input Voltage-Low Data Input Voltage-High ICC IIL IIH VIH-VIL VIL-VCC VIH-VCC -350 300 -2.0 -1.1 200 350 -1.58 -0.74 mA µA µA mV V V These inputs are compatible with 10K, 10KH and 100K ECL and PECL inputs Maximum current is specified at Vcc= Maximum @ maximum temperature Symbol Min Typical Max Unit Notes Receiver Specifications Parameter Optical Sensitivity Sensitivity Maximum Input Power Signal Detect-Asserted (Note 1) Signal Detect-Asserted (Note 1) Signal Detect-Deasserted Signal Detect-Hysteresis Wavelength of Operation Pin Pa Pa Pd -3 -45 1.0 1260 -33 -35 -33 -35 4.0 1360 dBm dBm dBm dBm dBm dBm dB nm MEasured on transition : low to high, , B15/13-155-TDFB(3)-SSC5-40 MEasured on transition : low to high, B15/13-155-TDFB(3)-SSC7-40 Measured on transition: high to low Measured with 223-1 PRBS, BER = 10-10, B-15/13-155-TDFB(3)-SSC5-40 Measured with 223-1 PRBS, BER = 10-10, B-15/13-155-TDFB(3)-SSC7-40 Symbol Min Typical Max Unit Notes Note 1: Regardless of whether the Tx is on or not, SD should be asserted at less than -33 or -35 dBm of input power level and deasserted at higher than -45 dBm of input power level from the outside Tx. Receiver Specifications Parameter Electrical Power Supply Current Data Output Voltage-Low Data Output Voltage-High Signal Detect Output Voltage-Low Signal Detect Output Voltage-High ICC VOL -Vcc VOH- Vcc VSDL-Vcc VSDH- Vcc -2.0 -1.1 -2.0 -1.1 100 -1.58 -0.74 -1.58 -0.74 mA V V V V These outputs are compatible with 10K, 10KH and 100KECL and PECL outputs The current excludes the output load current Symbol Min Typical Max Unit Note LUMINENTOIC.COM 20550 Nordhoff St. • Chatsworth, CA 91311 • tel: 818.773.9044 • fax: 818.576.9486 9F, No 81, Shui Lee Rd. • Hsinchu, Taiwan, R.O.C. • tel: 886.3.5169222 • fax: 886.3.5169213 2 LUMNDS1887-Jun0308 Rev A.1 155 Mbps Bi-directional Receptacle Single Fiber Transceiver B-15/13-155-TDFB(3)-SSCx-40 Connection Diagram 1. (Rx GND) 2. (Rx +) 3. (Rx-) 4. (SD) 5. (Rx Vcc) 6. (Tx Vcc) 7. (TX-) 8. (TX+) 9. (Tx GND) NC Top View NC Receiver Signal Ground Receiver Data Out Receiver Data Out Bar Signal Detect Receiver Power Supply Transmitter Power Supply Transmitter Data In Bar Transmitter Data in Transmitter Signal Ground PIN 1 2 3 4 5 6 7 8 Warnings 9 Symbol RxGND RD+ RDSD RxVcc TxVcc TDTD+ TxGND Notes Directly connect this pin to the receiver ground plane See recommended circuit schematic See recommended circuit schematic Active high on this indicates a received optical signal DC power for the receiver section DC power for the transmitter section See recommended circuit schematic See recommended circuit schematic Directly connect this pin to the transmitter ground plane LUMINENTOIC.COM 20550 Nordhoff St. • Chatsworth, CA 91311 • tel: 818.773.9044 • fax: 818.576.9486 9F, No 81, Shui Lee Rd. • Hsinchu, Taiwan, R.O.C. • tel: 886.3.5169222 • fax: 886.3.5169213 3 LUMNDS1887-Jun0308 Rev A.1 155 Mbps Bi-directional Receptacle Single Fiber Transceiver B-15/13-155-TDFB(3)-SSCx-40 Recommended Circuit Schematic (3.3V/5V) B-15/13-155-TDFB(3)-SSCx-40 Tx Vcc C5 Rx Vcc 9 R1 R3 8 7 65 432 1 R9 R5 R7 C6 TD + TD - RD + RD - Tx Vcc Rx Vcc R2 R4 SD R10 R6 No internal connection Transceiver Top view No internal connection R8 L1 Vcc Notes +3.3V: R1=R3=R5=R7=R9=130 R2=R4=R6=R8=R10=82 C1=C2=C3=C5=C6=0.1F C4=10F L1=L2=1H Notes +5V: R1=R3=R5=R7=R9=82 R2=R4=R6=R8=R10=130 C1=C2=C3=C5=C6=0.1F C4=10F L1=L2=1H C3 C1 Rx Vcc L2 C4 C2 Tx Vcc The split-loaded terminations for ECL signals need to be located at the input of devices receiving those ECL signals. The power supply filtering is required for good EMI performance. Use short tracks from the inductor L1/L2 to the module Rx Vcc. A GND plane under the module is required for good EMI and sensitivity performance. LUMINENTOIC.COM 20550 Nordhoff St. • Chatsworth, CA 91311 • tel: 818.773.9044 • fax: 818.576.9486 9F, No 81, Shui Lee Rd. • Hsinchu, Taiwan, R.O.C. • tel: 886.3.5169222 • fax: 886.3.5169213 4 LUMNDS1887-Jun0308 Rev A.1 155 Mbps Bi-directional Receptacle Single Fiber Transceiver B-15/13-155-TDFB(3)-SSCx-40 Package Diagram B-15/13-155-TDFB(3)-SSCx-40 Units in mm LUMINENTOIC.COM 20550 Nordhoff St. • Chatsworth, CA 91311 • tel: 818.773.9044 • fax: 818.576.9486 9F, No 81, Shui Lee Rd. • Hsinchu, Taiwan, R.O.C. • tel: 886.3.5169222 • fax: 886.3.5169213 5 LUMNDS1887-Jun0308 Rev A.1 155 Mbps Bi-directional Receptacle Single Fiber Transceiver B-15/13-155-TDFB(3)-SSCx-40 Ordering Information Available Options: B-15/13-155-TDFB-SSC5-40 B-15/13-155-TDFB3-SSC5-40 B-15/13-155-TDFB-SSC5-40-G5 B-15/13-155-TDFB3-SSC5-40-G5 B-15/13-155-TDFB-SSC7-40 B-15/13-155-TDFB3-SSC7-40 B-15/13-155-TDFB-SSC7-40-G5 B-15/13-155-TDFB3-SSC7-40-G5 Part Numbering Definitions: B - 15/13 - 155 - TDFB(3) - S SC Tx Power -40 -RoHS • Wavelength Tx Wavelength=1550nm Rx Wavelength=1310nm • Communication protocol 155 = LVPECL SD output • TDFB = +5V Transceiver • TDFB3 = +3.3V Transceiver • Single mode fiber • Connector options SC • Tx Power 5 = -5 to 0 dBm 7 = -3 to +2 dBm • -40 = 40.3mm Package • RoHS Blank = RoHS non-compliant product G5 = RoHS 5/6-compliant product (lead exemption) LUMINENTOIC.COM 20550 Nordhoff St. • Chatsworth, CA 91311 • tel: 818.773.9044 • fax: 818.576.9486 9F, No 81, Shui Lee Rd. • Hsinchu, Taiwan, R.O.C. • tel: 886.3.5169222 • fax: 886.3.5169213 6 LUMNDS1887-Jun0308 Rev A.1 155 Mbps Bi-directional Receptacle Single Fiber Transceiver B-15/13-155-TDFB(3)-SSCx-40 Warnings Handling Precautions: This device is susceptible to damage as a result of electrostatic discharge (ESD). A static free environment is highly recommended. Follow guidelines according to proper ESD procedures. Laser Safety: Radiation emitted by laser devices can be dangerous to human eyes. Avoid eye exposure to direct or indirect radiation. Legal Notice IMPORTANT NOTICE! All information contained in this document is subject to change without notice, at LuminentOIC’s sole and absolute discretion. LuminentOIC warrants performance of its products to current specifications only in accordance with the company’s standard one-year warranty; however, specifications designated as “preliminary” are given to describe components only, and LuminentOIC expressly disclaims any and all warranties for said products, including express, implied, and statutory warranties, warranties of merchantability, fitness for a particular purpose, and non-infringement of proprietary rights. Please refer to the company’s Terms and Conditions of Sale for further warranty information. LuminentOIC assumes no liability for applications assistance, customer product design, software performance, or infringement of patents, services, or intellectual property described herein. No license, either express or implied, is granted under any patent right, copyright, or intellectual property right, and LuminentOIC makes no representations or warranties that the product(s) described herein are free from patent, copyright, or intellectual property rights. Products described in this document are NOT intended for use in implantation or other life support applications where malfunction may result in injury or death to persons. LuminentOIC customers using or selling products for use in such applications do so at their own risk and agree to fully defend and indemnify LuminentOIC for any damages resulting from such use or sale. THE INFORMATION CONTAINED IN THIS DOCUMENT IS PROVIDED ON AN “AS IS” BASIS. Customer agrees that LuminentOIC is not liable for any actual, consequential, exemplary, or other damages arising directly or indirectly from any use of the information contained in this document. Customer must contact LuminentOIC to obtain the latest version of this publication to verify, before placing any order, that the information contained herein is current. © LuminentOIC, Inc. 2003 All rights reserved LUMINENTOIC.COM 20550 Nordhoff St. • Chatsworth, CA 91311 • tel: 818.773.9044 • fax: 818.576.9486 9F, No 81, Shui Lee Rd. • Hsinchu, Taiwan, R.O.C. • tel: 886.3.5169222 • fax: 886.3.5169213 7 LUMNDS1887-Jun0308 Rev A.1
B-13-155-TDFB-SSC7-40
### 物料型号 - 型号:B-15/13-155-TDFB(3)-SSCx-40 - 定义:该型号表示一个155 Mbps双向单纤收发器,具备以下特性: - Wavelength Tx:1550nm(发射波长) - Rx Wavelength:1310nm(接收波长) - Communication protocol:155 Mbps LVPECL SD输出 - TDFB:+5V收发器 - TDFB3:+3.3V收发器 - Single mode fiber:单模光纤 - Connector options:SC连接器 - Tx Power:5表示-5至0 dBm;7表示-3至+2 dBm - Package:-40=40.3mm封装 - RoHS:符合RoHS标准,G5表示RoHS 5/6合规产品(铅豁免)

### 器件简介 - 简介:这是一个符合SONET OC-3 SDH STM-1标准的155 Mbps双向单纤收发器,具备PECL/LVPECL差分输入输出,支持单+5V或单+3.3V电源供电,符合Class 1激光国际安全标准IEC 825,无冷却激光二极管与MQW结构DFB激光,符合Telcordia (Bellcore) GR-468-CORE,RoHS合规。

### 引脚分配 - 1. RxGND:直接连接到接收器地平面 - 2. RD+:见推荐电路图 - 3. RD-:见推荐电路图 - 4. SD:活动高,表示接收到光信号 - 5. RxVcc:接收器部分的直流电源 - 6. TxVcc:发射器部分的直流电源 - 7. TD-:见推荐电路图 - 8. TD+:见推荐电路图 - 9. TxGND:直接连接到发射器地平面

### 参数特性 - 绝对最大额定值: - 电源电压Vcc:0至6V(B-15/13-155-TDFB-SSCx-40),0至3.6V(B-15/13-155-TDFB3-SSCx-40) - 输出电流Iout:30mA - 焊接温度:260ºC,仅在引脚上10秒 - 存储温度Tstg:-40至85ºC - 推荐工作条件: - 电源电压Vcc:4.75至5.25V(B-15/13-155-TDFB-SSCx-40),3.1至3.5V(B-15/13-155-TDFB3-SSCx-40) - 工作温度(外壳)TopR:0至70ºC - 数据速率:155 Mbps

### 功能详解 - 发射器规格: - 发射光功率Po:-5至+3 dBm - 发射中心波长λ:1480至1580 nm - 输出谱宽度∆λ:1 nm(-20dB宽度) - 边模抑制比Sr:30至35 dB CW - 消光比ER:10 dB - 输出眼图:符合ITU-T建议G.957/STM-1 - 光上升时间tr:2 ns(10%至90%值) - 光下降时间tf:2 ns(10%至90%值) - 光隔离:30 dB(1480-1580nm至少30dB隔离) - 相对强度噪声RIN:-116 dB/Hz - 总抖动TJ:1.2 ns(用223-1 PRBS测量,72个1和72个0)

- 接收器规格: - 灵敏度:-33至-35 dBm(根据不同型号) - 最大输入功率Pin:-3 dBm - 信号检测-断言(SD):-33至-35 dBm(根据不同型号) - 信号检测-取消断言Pd:-45 dBm - 信号检测-滞后:1.0至4.0 dB - 工作波长:1260至1360 nm

### 应用信息 - 应用:适用于需要155 Mbps数据传输速率的单模光纤通信系统,如电信网络、数据通信和企业网络。

### 封装信息 - 封装:40.3mm长度的封装,具体尺寸和视图参见PDF文档中的Package Diagram部分。
B-13-155-TDFB-SSC7-40 价格&库存

很抱歉,暂时无法提供与“B-13-155-TDFB-SSC7-40”相匹配的价格&库存,您可以联系我们找货

免费人工找货