FTM-3012S-GG

June ,15 2006 1.0625～1.25Gbps GBIC Transceiver (Up to 20km transmission, RoHS compliant) Members Of FlexonTM Family Standard Compatible Compatible Channel Compatible with IEEE 802.3z Compatible with IEEE 802.3ah Compatible with FCC 47 CFR Part 15, Class B Compatible with FDA 21 CFR 1040.10 and 1040.11, Class I with GBIC specification (SFF-8053), Rev 5.5 with ANSI specification for Fibre Features 1.0625~1.25Gbps multi-rate 1310nm FP laser transmitter. 2m~10km with 9/125µm SMF for FTM-3012S-GG 2m~20km with 9/125µm SMF for FTM-3012S-G20G 550m with 50/125 µm MMF 550m with 62.5/125 µm MMF Class I laser product Low EMI and excellent ESD protection Duplex SC optical interface Extended power supply +3.3/5.0V compatibility Standard serial ID information compatible with SFF-8053 Operating case temperature: 0 to +70°C RoHS Compliant Description Fiberxon 1.0625~1.25Gbps GBIC transceivers are high performance, cost effective modules. They are designed for Gigabit Ethernet and 1x Fibre Channel applications from 10km to 20km. The transceiver consists of two sections: The transmitter section incorporates a highly reliable FP laser. And the receiver section consists of a PIN photodiode mounted together with a trans-impedance preamplifier (TIA). All modules satisfy Class I Laser Safety requirements. The standard serial ID information compatible with GBIC MSA describes the transceiver’s capabilities, standard interfaces, manufacturer and other information. The host equipment can access this Applications Switch to Switch interface Switched backplane applications Router/Server interface Other optical transmission systems information via the 2-wire serial CMOS EEPROM protocol. For further information, please refer to SFF-8053. Fiberxon’s FTM-3012S-GxxG transceiver series are compliant with RoHS Fiberxon Proprietary and Confidential, Do Not Copy or Distribute Page 1 of 1 Controlled Electronic Version. 24hrs Obsolete when printed out without authorization. Last printed 6/27/2006 4:31 PM 1.25G GBIC Transceiver Up to 20 km transmission, RoHS compliant June ,15 2006 Regulatory Compliance The transceivers have been tested according to American and European product safety and electromagnetic compatibility regulations (See Table 1). For further information regarding regulatory certification, please refer to FlexonTM regulatory specification and safety guidelines, or contact with Fiberxon, Inc. America sales office listed at the end of the documentation. Table 1 - Regulatory Compliance Feature Standard Performance Electrostatic Discharge (ESD) to the Electrical Pins Electrostatic Discharge (ESD) to the Duplex LC Receptacle Electromagnetic Interference (EMI) Immunity Laser Eye Safety Component Recognition RoHS MIL-STD-883E Method 3015.7 IEC 61000-4-2 GR-1089-CORE FCC Part 15 Class B EN55022 Class B (CISPR 22B) VCCI Class B IEC 61000-4-3 FDA 21CFR 1040.10 and 1040.11 EN60950, EN (IEC) 60825-1,2 UL and CSA 2002/95/EC 4.1&4.2 Class 1(>500 V) Compatible with standards Compatible with standards Compatible with standards Compatible product. with Class I laser Compliant with standards Compliant with standards Absolute Maximum Ratings Absolute Maximum Ratings are those values beyond which damage to the devices may occur. Table 2 – Absolute Maximum Ratings Parameter Symbol Min. Max. Unit Storage Temperature Supply Voltage Operating Humidity TS VCC - -40 -0.5 5 +85 6 95 °C V % Recommended Operating Conditions Table 3 - Recommended Operating Conditions Parameter Symbol Min. Typical Max. Unit Operating Case Temperature Power Supply Voltage Power Supply Current Data Rate TC VCC ICC 0 3.1 1.0625/1.25 +70 5.5 300 °C V mA Gbps Fiberxon Proprietary and Confidential, Do Not Copy or Distribute Page 2 of 2 Controlled Electronic Version. 24hrs Obsolete when printed out without authorization. Last printed 6/27/2006 4:31 PM 1.25G GBIC Transceiver Up to 20 km transmission, RoHS compliant June ,15 2006 FTM-3012S-GG (1310nm FP and PIN, 10km) Table 4 –Optical and Electrical Characteristics Parameter Symbol Min. Transmitter Typical Max. Unit Notes Centre Wavelength Average Output Power Spectral Width (RMS) Extinction Ration P0ut @TX Disable Asserted Rise/Fall Time (20%～80%) Total Jitter Deterministic Jitter 1.25G 1.0625G 1.25G 1.0625G λC P0ut σ EX tr/tf TJ DJ 1260 -9.5 9 1310 1360 -3 4 -45 0.26 0.431 0.43 0.2 0.21 nm dBm nm dB dBm 1 1 2 ns UI 3 UI 4 mV Ω V V V V nm dBm dBm dB 6 5 Output Optical Eye Data Input Swing Differential Input Differential Impedance TX Disable TX Fault Disable Enable Fault Normal λC ZIN IEEE 802.3z and ANSI Fibre Channel compatible VIN 200 140 2.0 0 Host_VCC-0.5 0 Receiver 1660 150 160 Vcc+0.3 0.8 Host_Vcc+0.3 0.5 1310 1650 -20 Centre Wavelength Receiver Sensitivity Receiver Overload Return Loss LOS De-Assert 1200 -3 12 LOSD LOSA -21 -35 1 4 dBm dBm dB mV UI 3 UI V V 5 LOS Assert LOS Hysteresis Data Output Swing Differential Total Jitter Deterministic Jitter LOS 1.25G 1.0625G 1.25G 1.0625G High Low VOUT TJ DJ 370 2000 0.749 0.61 0.462 0.36 Host_VCC-0.5 0 Host_Vcc+0.3 0.5 Note: 1. The optical power is launched into SMF. 2. Unfiltered, measured with a PRBS 27-1 test pattern @1.25Gbps 3. Measured with a PRBS 27 –1 test pattern@1.25Gbps/1.0625Gbps, meet the specified maximum output jitter requirements if the specified maximum input jitter is present. Fiberxon Proprietary and Confidential, Do Not Copy or Distribute Page 3 of 3 Controlled Electronic Version. 24hrs Obsolete when printed out without authorization. Last printed 6/27/2006 4:31 PM 1.25G GBIC Transceiver Up to 20 km transmission, RoHS compliant June ,15 2006 4. 5. 6. Measured with a PRBS 27 –1 test pattern@1.25Gbps/1.0625Gbps. AC coupled and terminated. Worst-case Extinction Ration, measured with a PRBS 27 –1 test pattern @1.25Gbps, BER≤1× 10-12. FTM-3012S-G20G (1310nm FP and PIN, 20km) Table 5 –Optical and Electrical Characteristics Parameter Symbol Min. Transmitter Typical Max. Unit Notes Centre Wavelength Average Output Power Spectral Width (RMS) Extinction Ration P0ut@TX Disable Asserted λC P0ut σ EX tr/tf TJ DJ 1270 -8 1310 2 1355 -3 4 -45 nm dBm nm dB dBm 1 1 9 0.26 0.431 0.43 0.2 0.21 IEEE 802.3z and ANSI Fibre Channel compatible 200 140 2.0 0 Host_VCC-0.5 0 Receiver Rise/Fall Time (20%～80%) Total Jitter Deterministic Jitter 1.25G 1.0625G 1.25G 1.0625G ns UI 2 3 UI 4 mV Ω V V V V nm dBm dBm dB 6 5 Output Optical Eye Data Input Swing Differential Input Differential Impedance TX Disable TX Fault Disable Enable Fault Normal λC ZIN VIN 1660 150 160 Vcc+0.3 0.8 Host_Vcc+0.3 0.5 1310 1650 -22 Centre Wavelength Receiver Sensitivity Receiver Overload Return Loss LOS De-Assert 1200 -3 12 LOSD LOSA -23 dBm dBm dB mV UI 3 UI V V 5 LOS Assert LOS Hysteresis Data Output Swing Differential Total Jitter Deterministic Jitter LOS Note: 1.25G 1.0625G 1.25G 1.0625G High Low -35 1 4 2000 0.749 0.61 0.462 0.36 Host_VCC-0.5 0 Host_Vcc+0.3 0.5 370 VOUT TJ DJ Fiberxon Proprietary and Confidential, Do Not Copy or Distribute Page 4 of 4 Controlled Electronic Version. 24hrs Obsolete when printed out without authorization. Last printed 6/27/2006 4:31 PM 1.25G GBIC Transceiver Up to 20 km transmission, RoHS compliant June ,15 2006 1. 2. 3. 4. 5. 6. The optical power is launched into SMF. Unfiltered, measured with a PRBS 27-1 test pattern @1.25Gbps Measured with a PRBS 27 –1 test pattern@1.25Gbps, meet the specified maximum output jitter requirements if the specified maximum input jitter is present. Measured with a PRBS 27 –1 test pattern@1.25Gbps. PECL level, internally AC coupled and terminated. Worst-case Extinction Ration, measured with a PRBS 27 –1 test pattern@1.25Gbps, BER≤1× 10-12. EEPROM Information The SFF-8053 defines a 256-byte memory map in EEPROM describing the transceiver’s capabilities, standard interfaces, manufacturer, and other information, which is accessible over a 2 wire serial interface at the 8-bit address 1010000X (A0h). The memory contents refer to Table 6 Table 6 - EEPROM Serial ID Memory Contents (A0h) Addr. 0 1 2 3—10 11 12 13 14 15 16 17 18 19 20—35 36 37—39 40—55 56—59 60-62 63 64—65 66 Field Size (Bytes) 1 1 1 8 1 1 1 1 1 1 1 1 1 16 1 3 16 4 3 1 2 1 Name of Field Identifier Connector Transceiver Encoding BR, nominal Reserved Length (9um)-km 01 01 00 00 00 02 12 00 0D 01 01 0D 00 xx xxkm 550m 550m Hex Description GBIC MOD4 SC Transmitter Code 8B10B 1.25Gbps Ext. Identifier 04 Length (9um) 64 Length (50um) 37 Length (62.5um) 37 Length (copper) 00 Reserved Vendor name Reserved Vendor OUI Vendor PN Vendor rev Reserved CC BASE Options BR, max 00 46 49 42 45 52 58 4F 4E 20 49 4E 43 2E 20 20 20 00 00 00 00 46 54 4D 2D 33 30 31 32 53 2D 47 xx xx 47 20 20 xx xx xx xx 00 00 00 xx 00 1A 00 Check sum of bytes 0 - 62 LOS, TX_FAULT and TX_DISABLE “FTM-3012S-GxxG ” (ASCⅡ) ASCⅡ( “31 30 20 20” means 1.0 revision) “FIBERXON INC. “(ASCⅡ) Fiberxon Proprietary and Confidential, Do Not Copy or Distribute Page 5 of 5 Controlled Electronic Version. 24hrs Obsolete when printed out without authorization. Last printed 6/27/2006 4:31 PM 1.25G GBIC Transceiver Up to 20 km transmission, RoHS compliant June ,15 2006 67 68—83 1 16 BR, min Vendor SN Vendor date code Reserved CC_EXT Vendor specific 00 xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx 20 20 00 xx Check sum of bytes 64 - 94 ASCⅡ Year (2 bytes), Month (2 bytes), Day (2 bytes) 84—91 92—94 95 96—255 8 1 1 160 Note: The “xx” byte should be filled in according to practical case. For more information, please refer to the related document of SFF-8053 Rev 5.5. Recommended Interface Circuit Figure 1 shows the recommended interface circuit. Host Board Vcc 2×4.7K to 10KΩ TX Disable TX Fault SerDat Out + GBIC Module Vcc 10K Ω Z=75Ω TD + SerDat Out - Z=75Ω Z=75Ω TD - Laser driver Protocol IC SERDES IC SerDat In + RD + SerDat In - Z=75Ω Amplifier RD - LOS Vcc 3×4.7K to 10KΩ MOD-DEF2 MOD-DEF1 MOD-DEF0 EEPROM RGND Figure 1, Recommended Interface Circuit Pin Definitions Figure 2 below shows the pin numbering of GBIC electrical interface. The pin functions are described in Table 7. Fiberxon Proprietary and Confidential, Do Not Copy or Distribute Page 6 of 6 Controlled Electronic Version. 24hrs Obsolete when printed out without authorization. Last printed 6/27/2006 4:31 PM 1.25G GBIC Transceiver Up to 20 km transmission, RoHS compliant June ,15 2006 Figure 2, Pin View Table 7 – Pin Function Definitions Pin Name Pin # Name/Function RECEIVER SIGNALS Signal Specification RGND VDDR -RX_DAT +RX_DAT 2, 3, 11, 14 15 12 13 Receiver Ground (may be connected with TGND in GBIC) Receiver +3.3/5 volt (may be connected with VDDT in GBIC) Receive Data, Differential PECL Ground, to GBIC Power, to GBIC High speed serial, from GBIC High speed serial, from GBIC Low speed, from GBIC Receive Data, Differential PECL Receiver Loss of Signal, logic high, open collector compatible, 4.7k to 10kΩpull up to VDDT on host TRANSMITTER SIGNALS RX_LOS 1 TGND VDDT +TX_DAT -TX_DAT 8, 9, 17, 20 16 18 19 Transmitter Ground (may be connected with RGND internally) Transmitter +3.3/5 volt (may be connected with VDDR in GBIC) Transmit Data, Differential PECL Ground, to GBIC Power, to GBIC High speed serial, to GBIC High speed serial, to GBIC Low speed, to GBIC Transmit Data, Differential PECL Transmitter Disable, logic high, open collector compatible, 4.7k to 10Kω pull up to VDDT on GBIC Transmitter Fault, logic high, open collector compatible, 4.7k to 10kΩ pull up to VDDT on host CONTROL SIGNALS TX_DISABLE 7 TX_FAULT 10 Low speed, from GBIC MOD_DEF(0) 4 TTL low, output MOD_DEF(1) MOD_DEF(2) 5 6 SCL serial clock signal, input SDA serial data signal, input/output Please reference SFF-8053, Annex D: Module definition “4” Fiberxon Proprietary and Confidential, Do Not Copy or Distribute Page 7 of 7 Controlled Electronic Version. 24hrs Obsolete when printed out without authorization. Last printed 6/27/2006 4:31 PM 1.25G GBIC Transceiver Up to 20 km transmission, RoHS compliant June ,15 2006 Mechanical Design Diagram The mechanical design diagram is shown in Figure 3 27.95 11.90 9.90 30.30 25.50 30.50 33.20 12.75 37.48 3.05 1.70 12.99 57.30 8.30 Figure 3, Mechanical Design Diagram of GBIC (1310nm) Fiberxon Proprietary and Confidential, Do Not Copy or Distribute Page 8 of 8 Controlled Electronic Version. 24hrs Obsolete when printed out without authorization. Last printed 6/27/2006 4:31 PM 65.60 1.25G GBIC Transceiver Up to 20 km transmission, RoHS compliant June ,15 2006 Ordering information FTM 3 0 1 2 S G x x G Wavelength 3: 1310nm Function 0: Standard Data rate 12: 1.25Gbps Note: The "Distance" bit may be omitted when it is "10" Package G: GBIC Receptable S: SC Distance 10: 10km 20: 20km Others G: RoHS compliance Part No. Product Description 1310nm, 1.0625~1.25Gbps, 10km, GBIC, RoHS compliant, 0°C~+70°C 1310nm, 1.0625~1.25Gbps, 20km, GBIC, RoHS compliance, 0°C~+70°C FTM-3012S-GG FTM-3012S-G20G Related Documents For further information, please refer to the following documents: FlexonTM GBIC Installation Guide FlexonTM GBIC Application Notes SFF-8053, Proposed Specification for GBIC (Gigabit Interface Converter), Rev 5.5 Fiberxon Proprietary and Confidential, Do Not Copy or Distribute Page 9 of 9 Controlled Electronic Version. 24hrs Obsolete when printed out without authorization. Last printed 6/27/2006 4:31 PM 1.25G GBIC Transceiver Up to 20 km transmission, RoHS compliant June ,15 2006 Obtaining Document You can visit our website: http://www.fiberxon.com Or contact with Fiberxon, Inc. America Sales Office listed at the end of documentation to get the latest documents. Revision History Revision Rev. 1a Rev. 1b Initiate Univer yang Henry xiao Review Simon.jiang Simon.jiang Approve Simon.jiang Simon.jiang Subject Initialize datasheet Add FTM-3012S-G20G Release Date April 15, 2006 June 15, 2006 © Copyright Fiberxon Inc. 2006 All Rights Reserved. All information contained in this document is subject to change without notice. The products described in this document are NOT intended for use in implantation or other life support applications where malfunction may result in injury or death to persons. The information contained in this document does not affect or change Fiberxon’s product specifications or warranties. Nothing in this document shall operate as an express or implied license or indemnity under the intellectual property rights of Fiberxon or third parties. All information contained in this document was obtained in specific environments, and is presented as an illustration. The results obtained in other operating environment may vary. THE INFORMATION CONTAINED IN THIS DOCUMENT IS PROVIDED ON AN ”AS IS” BASIS. In no event will Fiberxon be liable for damages arising directly from any use of the information contained in this document. Contact U.S.A. Headquarter: 5201 Great America Parkway, Suite 340 Santa Clara, CA 95054 U. S. A. Tel: 408-562-6288 Fax: 408-562-6289 Or visit our website: http://www.fiberxon.com Fiberxon Proprietary and Confidential, Do Not Copy or Distribute Page 10 of 10 Controlled Electronic Version. 24hrs Obsolete when printed out without authorization. Last printed 6/27/2006 4:31 PM