FTM-9412P-F20iG

Nov.10, 2005 SFF GE-PON PX20 ONU Transceiver FTM-9412P-F20(G)/F20i(G) (IEEE 802.3ah™-2004 1000BASE-PX20-U) Members of FlexonTM Family Standard Features Compliant with SFF MSA Single fiber bi-directional data links with symmetric 1.25Gbps upstream and 1.25Gbps downstream Integrated with micro-optics WDM filter for dual wavelength Tx/Rx operation at 1310/1490nm 1310nm burst-mode transmitter with DFB laser 1490nm continuous-mode receiver with PIN-TIA and 1550nm optical signal rejection Different operating temperature class 0 to 70℃ Standard Class -40 to 85℃ Industrial Class 2 × 5 SF F package with SC/UPC pigtail Single 3.3V power supply LVPECL compatible data input/output interface LVTTL transmitter burst-mode control LVTTL receiver signal-detected indication Low EMI and excellent ESD protection Class I laser safety standard IEC-60825 compliant RoHS compliance(FTM-9412P-F20G/F20iG) 2 × 5 SFF GE-PON PX20 ONU transceiver family is Optical Network Unit (ONU) for IEEE802.3ah™-2004 1000BASE-PX20-U application The transceiver is the high performance module for 1.25Gbps data link in single fiber by using 1310nm burst-mode transmitter and 1490nm continuous-mode receiver with 1550nm optical signal rejection. The transmitter section uses a multiple quantum well 1310nm DFB laser and is Class Ⅰ laser compliant product according to international safety standard IEC-60825. The receiver section uses an integrated 1490nm PIN and preamplifier mounted in an optical Gigabit Ethernet Passive Optical Networks (GE-PON) – ONU side Gigabit Ethernet Point-to-Point Bi-directional Transmission Media Converts for Fiber-In-The-Loop (FITL) header and limiting post-amplifier IC. The optical burst output can be enabled by a LVTTL logic high-level input of TX_BRST. Signal Detected (SD) output is provided to indicate the detection of an input optical signal of receiver. Doc No: DS3493001-2b Compliant with IEEE Std 802.3ah™ -2004 1000BASE-PX20-U Compliant with FCC 47 CFR Part 15, Class B Compliant with FDA 21 CFR 1040.10 and 1040.11, Class I Description Applications Fiberxon Proprietary and Confidential, Do Not Copy or Distribute Page 1 of 1 SFF GE-PON PX20 ONU Transceiver 20km transmission FTM-9412P-F20(G)/F20i(G) Preliminary Data Sheet Nov.10, 2005 Regulatory Compliance The transceivers have been tested according to American and European product safety and electromagnetic compatibility regulations (See Table 1). For further information regarding regulatory certification, please refer to FlexonTM regulatory specification and safety guidelines, or contact with Fiberxon, Inc. America sales office listed at the end of documentation. Table 1 - Regulatory Compliance Feature Electrostatic Discharge (ESD) to the Electrical Pins Electromagnetic Interference (EMI) Immunity Laser Eye Safety Component Recognition MIL-STD-883E Method 3015.7 FCC Part 15 Class B EN55022 Class B (CISPR 22B) VCCI Class B IEC 61000-4-3 FDA 21CFR 1040.10 and 1040.11 EN60950, EN (IEC) 60825-1,2 UL and CSA Compliant with standards Compliant with Class I laser product Compliant with standards Compliant with standards Standard Performance Class Ⅰ(>500 V) RoHS 2002/95/EC 4.1&4.2 Compliant with standards Absolute Maximum Ratings Absolute Maximum Ratings are those values, beyond which, some damages may occur to the devices. Exposure to conditions above the Absolute Maximum Ratings listed in Table 2 may negatively impact the reliability of the products. Table 2 - Absolute Maximum Ratings Parameter Storage Ambient Temperature Operating Ambient Temperature (Note 1) Operating Humidity Power Supply Voltage Input Voltage Receiver Damaged Threshold Soldering Temperature Bending Radius Pigtail Fiber Contact Temperature 30 85 Symbol TSTG TOPR HOPR VCC Min. -40 0 -40 5 0 GND +7 400 Max. 85 70 85 95 4 Vcc Unit °C °C % V V dBm °C mm °C Note 2 FTM-9412P-F20(G) FTM-9412P-F20i(G) Note Note 1: With airflow 1m/sec when ambient temperature is above 60°C Note 2: Only for soldering by iron and 10 seconds on leads only Fiberxon Proprietary and Confidential, Do Not Copy or Distribute Page 2 of 2 Doc No: DS3493001-2b SFF GE-PON PX20 ONU Transceiver 20km transmission FTM-9412P-F20(G)/F20i(G) Preliminary Data Sheet Nov.10, 2005 Recommended Operating Conditions Table 3 - Recommended Operating Conditions Parameter Power Supply Voltage Operating Ambient Temperature (Note 1) Operating Humidity Range Data Rate Data Rate Drift -100 Symbol VCC TOPR HOPR Min. 3.13 0 -40 5 1.25 +100 Typ. 3.3 Max. 3.47 70 85 95 Unit V °C % Gbit/s PPM Note 3.3V±5% FTM-9412P-F20(G) FTM-9412P-F20i(G) Note 1: When ambient temperature is above 60°C, airflow at rate higher than 1m/sec is required Optical and Electrical Characteristics Table 4 - Transmitter Optical and Electrical Characteristics FTM-9412P-F20(G) FTM-9412P-F20i(G) Optical Center Wavelength Optical Spectrum Width (-20dB) Side Mode Suppression Ratio Average Launch Power (BOL) Average Launch Power (EOL) Average Launch Power-OFF Transmitter Extinction Ratio Rise/Fall Time (20%-80%) Burst Turn On Time Burst Turn Off Time Burst Enable Duration Burst Disable Duration RIN15OMA Optical Return Loss Tolerance Transmitter Reflectance Transmitter and Dispersion Penalty Optical Eye Diagram Data Input Differential Swing Input Differential Impedance Power Supply Current Transmitter Burst Control Voltage - Low Transmitter Burst Control Voltage - High VIN ZIN ICC_TX VBURST, L VBURST, H 0 2.0 TDP 200 90 100 0°C