FTM-9412S-F10DCG

Mar. 1, 2007 2x5 SFF GE-PON ONU Diplexer FTM-9412S-F10(G) FTM-9412S-F10DC(G) (IEEE 802.3ah™-2004 1000BASE-PX10-U) Members of FlexonTM Family Standard Compliant with SFF MSA Compliant with IEEE Std 802.3ah™ -2004 1000BASE-PX10-U Compliant with FCC 47 CFR Part 15, Class B Features Single fiber bi-directional data links with symmetric 1.25Gbps upstream and 1.25Gbps downstream Integrated with micro-optics WDM filter for dual wavelength Tx/Rx operation at 1310/1490nm 1310nm burst-mode transmitter with FP laser 1490nm continuous-mode receiver with PIN-TIA 1550nm optical signal rejection 0 to 70℃ operating case temperature 2 × 5 SFF package with SC receptacle form Single 3.3V power supply LVPECL compatible data input/output interface LVTTL transmitter burst-mode control LVTTL receiver signal-detected indication Low EMI and excellent ESD protection Class I laser safety standard IEC-60825 compliant RoHS compliance (FTM-9412S-F10G/F10DCG) Compliant with FDA 21 CFR 1040.10 and 1040.11, Class I Description FTM-9412S-F10(G)/F10DC(G) is Optical Network Unit (ONU) for IEEE802.3ah™-2004 1000BASE-PX10-U application. The transceiver is the high performance module for 1.25Gbps data link in single fiber by using 1310nm burst-mode transmitter and 1490nm continuous-mode receiver with 1550nm optical signal rejection. The transmitter section uses a multiple quantum well 1310nm FP laser and is ClassⅠlaser compliant product according to international safety standard IEC-60825. The receiver section uses an integrated 1490nm PIN and preamplifier mounted in an optical header and limiting post-amplifier IC. The optical burst output can be enabled by a LVTTL Applications Gigabit Ethernet Passive Optical Networks (GE-PON) – ONU side Gigabit Ethernet Point-to-Point Bi-directional Transmission Media Converts for Fiber-In-The-Loop (FITL) logic high-level input of TX_BRST. Signal Detected (SD) output is provided to indicate the detection of an input optical signal of receiver. Fiberxon Proprietary and Confidential, Do Not Copy or Distribute Page 1 of 11 Doc No: DS3493010-1f 2×5 SFF GE-PON ONU Diplexer IEEE 802.3ahTM 1000BASE-PX10U FTM-9412S-F10(G)/ FTM-9412S-F10DC(G) Preliminary Data Sheet Mar. 1, 2007 Regulatory Compliance The transceivers have been tested according to American and European product safety and electromagnetic compatibility regulations (See Table 1). For further information regarding regulatory certification, please refer to FlexonTM regulatory specification and safety guidelines, or contact with Fiberxon, Inc. America sales office listed at the end of documentation. Table 1 - Regulatory Compliance Feature Electrostatic Discharge (ESD) to the Electrical Pins Electromagnetic Interference (EMI) Immunity Laser Eye Safety Component Recognition RoHS MIL-STD-883E Method 3015.7 FCC Part 15 Class B EN55022 Class B (CISPR 22B) VCCI Class B IEC 61000-4-3 FDA 21CFR 1040.10 and 1040.11 EN60950, EN (IEC) 60825-1,2 UL and CSA 2002/95/EC 4.1&4.2 Compliant with standards Compliant with Class I laser product Compliant with standards Compliant with standards Compliant with standards Standard Performance Class Ⅰ(>500 V) Absolute Maximum Ratings Absolute Maximum Ratings are those values, beyond which, some damages may occur to the devices. Exposure to conditions above the Absolute Maximum Ratings listed in Table 2 may negatively impact the reliability of the products. Table 2 - Absolute Maximum Ratings Parameter Storage Ambient Temperature Operating Case Temperature Operating Humidity Power Supply Voltage Input Voltage Receiver Damaged Threshold Soldering Temperature Symbol TSTG TC HOPR VCC Min. -40 0 5 0 GND +2 400 Max. 85 70 95 4 Vcc Unit °C °C % V V dBm °C 1 Note Note 1: Only for soldering by iron and 10 seconds on leads only Fiberxon Proprietary and Confidential, Do Not Copy or Distribute Page 2 of 11 Doc No: DS3493010-1f 2×5 SFF GE-PON ONU Diplexer IEEE 802.3ahTM 1000BASE-PX10U FTM-9412S-F10(G)/ FTM-9412S-F10DC(G) Preliminary Data Sheet Mar. 1, 2007 Recommended Operating Conditions Table 3 - Recommended Operating Conditions Parameter Power Supply Voltage Operating Case Temperature Operating Humidity Range Data Rate Data Rate Drift -100 Symbol VCC TC HOPR Min. 3.13 0 5 1.25 +100 Typ. 3.3 Max. 3.47 70 95 Unit V °C % Gbit/s PPM Note 3.3V±5% Optical and Electrical Characteristics Table 4 - Transmitter Optical and Electrical Characteristics (0°C