FTM-9423P-F10DCG

Dex. 5, 2007 Preliminary SFF 1.25G/2.5G EPON ONU Transceiver FTM-9423P-F10DC(G) Members of FlexonTM Family Standard Compliant with SFF MSA Compliant with FCC 47 CFR Part 15, Class B Compliant with FDA 21 CFR 1040.10 and 1040.11, Class I Features Description Single fiber bi-directional data links with FTM-9423P-F10DC(G) is Optical Network Unit (ONU) transceiver for 1.25G/2.5G 10km Ethernet Passive Optical Networks (EPON) application. The transceiver is the high performance modules for 1.25G/2.5G data link in single fiber by using 1310nm burst mode transmitter and 1490nm continuous mode receiver with 1550nm optical signal rejection. The transmitter section uses a multiple quantum well 1310nm FP laser, which is Class Ⅰ laser compliant product according to international safety standard IEC-60825. The receiver section uses an integrated 1490nm PIN and preamplifier mounted in an optical header and limiting post-amplifier IC. The optical burst output can be enabled by a LVTTL logic high-level input of TX_BRST. Signal Detected (SD) output is provided to indicate the detection of an input optical signal of receiver. asymmetric 1.25Gbit/s upstream and 2.5Gbit/s downstream Integrated with micro-optics WDM filter for dual wavelength Tx/Rx operation at 1310/1490nm Integrated with a 1550nm block filter to meet RF overlay application Burst mode operation transmitter with 1310nm FP laser Continuous mode operation receiver with 1490nm high sensitivity PIN-TIA with 1550nm optical signal rejection 0 to 70℃ operating ambient temperature 2 × 5 SFF package with SC/UPC pigtail Single 3.3V power supply LVPECL data input and CML data output interface LVTTL transmitter burst-mode control LVTTL receiver signal-detected indication Low EMI and excellent ESD protection Class I laser safety standard IEC-60825 compliant RoHS Compliance (for FTM-9423P-F10DCG) Applications 1.25G/2.5G Ethernet Passive Optical Networks (EPON) – ONU side Fiberxon Proprietary and Confidential, Do Not Copy or Distribute Page 1 of 10 SFF2x5 1.25/2.5G EPON ONU Transceiver 10km transmission FTM-9423P-F10DC(G) Preliminary Data Sheet Dec. 5, 2007 Regulatory Compliance The transceivers have been tested according to American and European product safety and electromagnetic compatibility regulations (See Table 1). For further information regarding regulatory certification, please refer to FlexonTM regulatory specification and safety guidelines, or contact with Fiberxon, Inc. America sales office listed at the end of documentation. Table 1 - Regulatory Compliance Feature Electrostatic Discharge (ESD) to the Electrical Pins Electromagnetic Interference (EMI) Immunity Laser Eye Safety Component Recognition RoHS (for FTM-9423P-F10DCG) MIL-STD-883E Method 3015.7 FCC Part 15 Class B EN55022 Class B (CISPR 22B) VCCI Class B IEC 61000-4-3 FDA 21CFR 1040.10 and 1040.11 EN60950, EN (IEC) 60825-1,2 UL and CSA 2002/95/EC 4.1&4.2 Compliant with standards Compliant with Class I laser product Compliant with standards Compliant with standards Compliant with standards Standard Performance Class Ⅰ(>500 V) Absolute Maximum Ratings Absolute Maximum Ratings are those values, beyond which, some damages may occur to the devices. Exposure to conditions above the Absolute Maximum Ratings listed in Table 2 may negatively impact the reliability of the products. Table 2 - Absolute Maximum Ratings Parameter Storage Ambient Temperature Operating Ambient Temperature Operating Humidity Power Supply Voltage Input Voltage Receiver Damaged Threshold Soldering Temperature Bending Radius Pigtail Fiber Contact Temperature 30 85 Symbol TSTG TOPR HOPR VCC Min. -40 0 5 0 GND +4 400/10 260/10 Max. 85 70 95 4 VCC Unit °C °C % V V dBm °C/s °C/s mm °C 2 3 1 Note Note 1: With airflow 1m/sec when ambient temperature is above 60°C Note 2: Only for soldering by iron on leads only (for FTM-9423P-F10DC). Note 3: Soldering on lead only (for FTM-9423P-F10DCG). Fiberxon Proprietary and Confidential, Do Not Copy or Distribute Page 2 of 10 SFF2x5 1.25/2.5G EPON ONU Transceiver 10km transmission FTM-9423P-F10DC(G) Preliminary Data Sheet Dec. 5, 2007 Recommended Operating Conditions Table 3 - Recommended Operating Conditions Parameter Power Supply Voltage Operating Ambient Temperature Operating Humidity Data Rate(Upstream/Downstream) Symbol VCC TOPR HOPR Min. 3.13 0 5 1.25/2.5 Typ. Max. 3.47 70 95 Unit V °C % Gbit/s Note 3.3V±5% 1 Note 1: With airflow 1m/sec when ambient temperature is above 60°C Optical and Electrical Characteristics Table 4 - Transmitter Optical and Electrical Characteristics (0°C