FTM-9423P-KGHIG

May 15, 2007 SFF GPON ONT Diplexer FTM-9423P(T)-K(F)GH(i)G (ITU-T Rec.G.984.2) Members of FlexonTM Family Standard Compliant with ITU-T G.984.2, G.984.2 Amendment 1 Compliant with FCC 47 CFR Part 15, Class B Compliant with FDA 21 CFR 1040.10 and 1040.11, Class I Description FTM-9423P(T)-K(F)GH(i)G is Optical Network Terminal (ONT) diplexer for 1244/2488M Class B+ application in ITU-T Rec.G.984.2 and G.984.2 Amendment 1. fiber bi-directional data links with The diplexers are the high performance modules for 1244/2488M data link in single fiber by using 1310nm burst mode transmitter and 1490nm continuous mode receiver with 1550nm optical signal rejection. The transmitter section uses a multiple quantum well 1310nm DFB laser, which is Class Ⅰ laser compliant product according to international safety standard IEC-60825. The receiver section uses an integrated 1490nm APD and preamplifier mounted in an optical header and limiting post-amplifier IC. The optical burst output can be enabled by a LVTTL logic high-level input of TX_BRST. Signal Detected (SD) output is provided to indicate the detection of an input optical signal of receiver. The Digital diagnostic monitoring interface is Features Single asymmetric 1244Mbit/s upstream and 2488Mbit/s downstream Integrated with micro-optics WDM filter for dual wavelength Tx/Rx operation at 1310/1490nm Burst mode operation transmitter with 1310nm DFB laser Power levelling mechanism(for 2×10 SFF) Continuous mode operation receiver with 1490nm high sensitivity APD-TIA with 1550nm optical signal rejection Different operating case temperature class 0 to 70℃ Standard Class -40 to 85℃ Industrial Class 2×5 and 2×10 SFF package SC/UPC or SC/APC connector Single 3.3V power supply LVPECL data input interface and CML data output interface LVTTL transmitter burst-mode control LVTTL receiver signal-detected indication Low EMI and excellent ESD protection Class I laser safety standard IEC-60825 compliant incorporated into the 2×10 SFF transceivers and allows real time access to the transceiver operating parameters such as power supply, operating temperature, laser bias current, receiver optical power by reading a built-in memory with I2C interface. Applications Gigabit-capable Passive Optical Networks(GPON) ONT with video-overlay Fiberxon Proprietary and Confidential, Do Not Copy or Distribute Page 1 of 17 SFF GPON ONT Diplexer Class B+ attenuation range: 13-28dB Document Confidential Level: In public FTM-9423P(T)-K(F)GH(i)G Preliminary Data Sheet May. 15, 2007 Template ver. 1e Regulatory Compliance The transceivers have been tested according to American and European product safety and electromagnetic compatibility regulations (See Table 1). For further information regarding regulatory certification, please refer to FlexonTM regulatory specification and safety guidelines, or contact with Fiberxon, Inc. America sales office listed at the end of documentation. Table 1 - Regulatory Compliance Feature Electrostatic Discharge (ESD) to the Electrical Pins Electromagnetic Interference (EMI) Immunity Laser Eye Safety Component Recognition MIL-STD-883E Method 3015.7 FCC Part 15 Class B EN55022 Class B (CISPR 22B) VCCI Class B IEC 61000-4-3 FDA 21CFR 1040.10 and 1040.11 EN60950, EN (IEC) 60825-1,2 UL and CSA Compliant with standards Compliant with Class I laser product Compliant with standards Compliant with standards Standard Performance Class Ⅰ(>500 V) RoHS 2002/95/EC 4.1&4.2 Compliant with standards Absolute Maximum Ratings Absolute Maximum Ratings are those values, beyond which, some damages may occur to the devices. Exposure to conditions above the Absolute Maximum Ratings listed in Table 2 may negatively impact the reliability of the products. Table 2 - Absolute Maximum Ratings Parameter Storage Ambient Temperature Operating Case Temperature (Note) Operating Humidity Power Supply Voltage Input Voltage Receiver Damaged Threshold Soldering Temperature Bending Radius 30 Symbol TSTG TC HOPR VCC Min. -40 0 -40 5 0 GND 0 260/10 Max. 85 70 85 95 4 Vcc Unit °C °C % V V dBm °C/s mm FTM-9423P(T)-K(F)GHG FTM-9423P(T)-K(F)GHiG Note Note: Refer to temperature testing area marked in Figure 6 Fiberxon Proprietary and Confidential, Do Not Copy or Distribute Page 2 of 17 SFF GPON ONT Diplexer Class B+ attenuation range: 13-28dB Document Confidential Level: In public FTM-9423P(T)-K(F)GH(i)G Preliminary Data Sheet May. 15, 2007 Template ver. 1e Recommended Operating Conditions Table 3 - Recommended Operating Conditions Parameter Power Supply Voltage Operating Case Temperature Operating Humidity Data Rate(Upstream/Downstream) Consecutive Identical Digital Immunity 72 Symbol VCC TC HOPR Min. 3.13 0 -40 5 1244.16/2488.32 Typ. Max. 3.47 70 85 95 Unit V °C % Mbit/s Bit 3.3V±5% FTM-9423P(T)-K(F)GHG FTM-9423P(T)-K(F)GHiG Note Optical and Electrical Characteristics Table 4- Transmitter Optical and Electrical Characteristics FTM-9423P(T)-K(F)GHG FTM-9423P(T)-K(F)GHiG Parameter Optical Center Wavelength Optical Spectrum Width(-20dB) Side Mode Suppression Ratio Average Launch Power (mode 0) Average Launch Power (mode 1) Average Launch Power (mode 2) Average Launch Power-OFF Transmitter Extinction Ratio Burst Turn On Time Burst Turn Off Time Transmitter Reflectance Tolerance to Transmitter Incident Light Power Optical Penalty Optical Eye Diagram Data Input Differential Swing Common-Mode Input Voltage Input Differential Impedance Power Supply Current Transmitter Burst Control Voltage - Low Transmitter Burst Control Voltage - High VIN VCM ZIN ICC_TX VBURST, L VBURST, H 0 2.0 200 Vcc-1.49 90 Vcc-1.32 100 -15 0.5 Compliant With ITU-T G984.2 1600 Vcc-VIN/4 110 250 0.8 VCC mV V Ω mA V V 6 5 POFF ER TON TOFF 10 12.8 12.8 -10 POUT (0°C