FTM-9712P-F20G

Mar. 20, 2007 2×5/2×10 SFF GEPON OLT Transceiver FTM-9712P(T)-F(K)20(G) (IEEE 802.3ahTM-2004 1000Base-PX20-D) Members of FlexonTM Family Standard Compliant with SFF MSA Compliant with IEEE 802.3ah™-2004 Compliant with FCC 47 CFR Part 15, Class B Compliant with FDA 21 CFR 1040.10 and 1040.11, ClassⅠ Features Description Single fiber bi-directional data links with symmetric 1.25Gbps upstream and 1.25Gbps downstream Integrated with micro-optics WDM filter for dual wavelength Tx/Rx operation at 1490/1310nm 1490nm continuous-mode transmitter with DFB laser 1310nm burst-mode receiver with APD-TIA Optical isolator built in for extreme Return Loss tolerance Resetless burst-mode receiver design Support more than 24dB dynamic range 0 to 70°C operating temperature Optional 2 × 5/2 × 10 SF F package with SC/UPC and SC/APC pigtail Single 3.3V power supply LVPECL compatible data input/output interface LVTTL transmitter disable control LVTTL transmitter laser failure alarm (P-K20(G),T-K20(G)) LVTTL receiver signal-detected indication Low EMI and excellent ESD protection ClassⅠlaser safety standard IEC-60825 compliant RoHS compliance (FTM-9712P(T)-F(K)20G) FTM-9712P(T)-F(K)20(G) is Optical Line Terminal (OLT) compliant with 1000BASE-PX20 application. The transceiver is the high performance module for 1.25Gbps data link in single fiber by using 1490nm continuous-mode transmitter and 1310nm burst-mode receiver. The transmitter section uses a multiple quantum well 1490nm DFB laser and is Class Ⅰ laser compliant product according to international safety standard IEC-60825. The receiver section uses an integrated 1310nm PIN diode and preamplifier mounted in an optical header and limiting post-amplifier IC. Unlike the conventional burst-mode receiver, the receiver does not require reset pulse to receive optical data packets with different optical power. The optical output can be disabled by a LVTTL logic high-level input of TX_DIS. LAS_nFAIL is provided to indicate that degradation of the laser (2 × 1 0 SFF ). Signal Detected (SD) output is provided to indicate the detection of an input optical signal of receiver. Applications Gigabit Ethernet Passive Optical Networks (GEPON) – OLT side Fiberxon Proprietary and Confidential, Do Not Copy or Distribute Page 1 of 13 Doc No: DS3513000-1d 2× 5/2×10 SFF GEPON OLT Transceiver 20km transmission FTM-9712P(T)-F(K)20(G) Preliminary Data Sheet Mar. 20, 2007 Regulatory Compliance The transceivers have been tested according to American and European product safety and electromagnetic compatibility regulations (See Table 1). For further information regarding regulatory certification, please refer to FlexonTM regulatory specification and safety guidelines, or contact with Fiberxon, Inc. America sales office listed at the end of documentation. Table 1 - Regulatory Compliance Feature Electrostatic Discharge (ESD) to the Electrical Pins Electromagnetic Interference (EMI) Immunity Laser Eye Safety Component Recognition RoHS MIL-STD-883E Method 3015.7 FCC Part 15 Class B EN55022 Class B (CISPR 22B) VCCI Class B IEC 61000-4-3 FDA 21CFR 1040.10 and 1040.11 EN60950, EN (IEC) 60825-1,2 UL and CSA 2002/95/EC 4.1&4.2 Compliant with standards Compliant with Class I laser product Compliant with standards Compliant with standards Compliant with standards Standard Performance Class Ⅰ(>500 V) Absolute Maximum Ratings Absolute Maximum Ratings are those values, beyond which, some damage may occur to the devices. Exposure to conditions above the Absolute Maximum Ratings listed in Table 2 may negatively impact the reliability of the products. Table 2- Absolute Maximum Ratings Parameter Storage Ambient Temperature Operating Ambient Temperature Operating Humidity Power Supply Voltage Input Voltage Receiver Damaged Threshold Soldering Temperature Bending Radius Pigtail Fiber Contact Temperature 30 85 Symbol TSTG TOPR HOPR VCC Min. -40 0 5 0 GND +4 400 260/10 Max. 85 70 95 4 VCC Unit °C °C % V V dBm °C °C/s mm °C 2 3 Note 1 Note 1: When ambient temperature is above 60°C, airflow at rate higher than 1m/sec is required Note 2: Only for soldering by iron and 10 seconds on leads only (for FTM-9712P(T)-F(K)20). Note 3: Soldering on lead only (for FTM-9712P(T)-F(K)20G). Fiberxon Proprietary and Confidential, Do Not Copy or Distribute Page 2 of 13 Doc No: DS3513000-1d 2× 5/2×10 SFF GEPON OLT Transceiver 20km transmission FTM-9712P(T)-F(K)20(G) Preliminary Data Sheet Mar. 20, 2007 Recommended Operating Conditions Table 3 - Recommended Operating Conditions Parameter Power Supply Voltage Operating Ambient Temperature Operating Humidity Range Data Rate Data Rate Drift -100 Symbol VCC TOPR HOPR Min. 3.13 0 5 1.25 +100 Typ. 3.3 Max. 3.47 70 95 Unit V °C % Gbit/s PPM Note 3.3V±5% 1 Note 1: When ambient temperature is above 60°C, airflow at rate higher than 1m/sec is required Optical and Electrical Characteristics Table 4 - Transmitter Optical and Electrical Characteristics (0°C