FTM-9723P-KGHG

Jun.7, 2006 2x10 SFF G-PON OLT Transceiver FTM-9723P-KGH(G) Members of FlexonTM Family Standard Compliant with ITU-T G.984.2 Amendment 1 Compliant with FCC 47 CFR Part 15, Class B Compliant with FDA 21 CFR 1040.10 and 1040.11, Class Description Features Single fiber bi-directional 2488.32Mbps data links with and FTM-9723P-KGH(G) is Optical Line Terminal (OLT) compliant with ITU-T Rec.G.984.2 Amendment 1. The transceiver is the high performance module for 2488.32Mbps downstream and 1244.16Mbps upstream data link in single fiber by using 1490nm continuous-mode transmitter and 1310nm burst-mode receiver. The transmitter section uses a multiple quantum well 1490nm DFB laser and is Class Ⅰ laser compliant product according to international safety standard IEC-60825. The receiver section uses an integrated 1310nm APD (Avalanche Photo Diode) and preamplifier mounted in an optical header and limiting post-amplifier IC. Unlike the conventional burst-mode receiver, the receiver does not require reset pulse to receive optical data packets with different optical power. The optical output can be disabled by a LVTTL logic high-level input of TX_DIS. LAS_FAIL is provided to indicate that degradation of the laser. Signal Detected (SD) output is provided to indicate the detection of an input optical signal of receiver. Digital diagnostic monitoring interface is incorporated into the transceivers and allows real time access to the transceiver operating parameters such as power supply, operating temperature, laser bias current, transmitter optical power by reading a built-in memory with I2C interface. Analog RSSI signal indicate the received Gigabit-capable Passive Optical Networks (G-PON) – OLT side optical power value and the calibration parameters are stored in the memory. Doc No: DS3633001-1d asymmetric downstream 1244.16Mbps upstream Integrated with micro-optics WDM filter for dual wavelength Tx/Rx operation at 1490/1310nm 1490nm continuous-mode transmitter with DFB laser 1310nm burst-mode receiver with APD-TIA Optical isolator built in for extreme Return Loss tolerance Resetless burst-mode receiver design Support Class B+ attenuation range 13-28dB Support more than 20dB dynamic range 0 to 70°C operating temperature 2 x10 SF F package with SC/UPC pigtail Digital diagnostic monitoring interface Analog RSSI (Received Signal Strength Indication) for monitoring on received optical power. Single 3.3V power supply LVPECL compatible data input/output interface LVTTL transmitter disable control LVTTL transmitter fault alarm LVTTL receiver signal-detected indication Low EMI and excellent ESD protection ClassⅠlaser safety standard IEC-60825 compliant Applications Fiberxon Proprietary and Confidential, Do Not Copy or Distribute Page 1 of 16 2x10 SFF G-PON OLT Transceiver (Temporary Version) Class B+ attenuation range: 13-28dB Jul.7,2006 Regulatory Compliance The transceivers have been tested according to American and European product safety and electromagnetic compatibility regulations (See Table 1). For further information regarding regulatory certification, please refer to FlexonTM regulatory specification and safety guidelines, or contact with Fiberxon, Inc. America sales office listed at the end of documentation. Table 1 - Regulatory Compliance Feature Electrostatic Discharge (ESD) to the Electrical Pins Electromagnetic Interference (EMI) Immunity Laser Eye Safety Component Recognition Pigtail Integrity MIL-STD-883E Method 3015.7 FCC Part 15 Class B EN55022 Class B (CISPR 22B) VCCI Class B IEC 61000-4-3 FDA 21CFR 1040.10 and 1040.11 EN60950, EN (IEC) 60825-1,2 UL and CSA GR326 and GR468 Compliant with standards Compliant with Class I laser product Compliant with standards Compliant with standards Compliant with standards Standard Performance Class Ⅰ(>500 V) Absolute Maximum Ratings Absolute Maximum Ratings are those values, beyond which, some damage may occur to the devices. Exposure to conditions above the Absolute Maximum Ratings listed in Table 2 may negatively impact the reliability of the products. Table 2- Absolute Maximum Ratings Parameter Storage Ambient Temperature Operating Case Temperature Operating Humidity Power Supply Voltage Input Voltage Receiver Damaged Threshold Soldering Temperature Bending Radius Pigtail Fiber Contact Temperature 30 85 Symbol TSTG TC HOPR VCC Min. -40 0 5 0 GND 0 400 Max. 85 70 95 4 Vcc Unit °C °C % V V dBm °C mm °C 1 Note Note 1: Only for soldering by iron and 10 seconds on leads only Fiberxon Proprietary and Confidential, Do Not Copy or Distribute Page 2 of 16 Doc No: DS3633001-1d 2x10 SFF G-PON OLT Transceiver (Temporary Version) Class B+ attenuation range: 13-28dB Jul.7,2006 Recommended Operating Conditions Table 3 - Recommended Operating Conditions Parameter Power Supply Voltage Operating Case Temperature Operating Humidity Range Data Rate(Upstream/Downstream) Symbol VCC TC HOPR Min. 3.13 0 5 1244.16/2488.32 Typ. 3.3 Max. 3.47 70 95 Unit V °C % Mbit/s Note 3.3V±5% Optical and Electrical Characteristics Table 4 - Transmitter Optical and Electrical Characteristics (0°C