FTM-9812T-C10

Aug. 10, 2007 GEPON ONU Triplexer FTM-9812T-C10(G) (IEEE 802.3ah™-2004 1000BASE-PX10-U) Members of FlexonTM Family Standard Compliant with IEEE Std 802.3ah™ -2004 1000BASE-PX10-U and ITU-T G.983.3 Compliant with FCC 47 CFR Part 15, Class B Features Single fiber bi-directional 1.25Gbps triple links with Compliant with FDA 21 CFR 1040.10 and 1040.11, Class I symmetric upstream/1.25Gbps Description FTM-9812T-C10(G) triplexer is Optical Network Unit (ONU) for IEEE802.3ah™-2004 1000BASE-PX10 application. The triplexer is the high performance module for 1.25Gbps data link in single fiber by using 1310nm burst mode transmitter and 1490nm continuous mode digital receiver with 1550nm CATV analog receiver. The transmitter section uses a multiple quantum well 1310nm FP laser ,which is Class Ⅰ laser compliant product according to international safety standard IEC-60825. The digital receiver section uses an integrated 1490nm PIN and preamplifier mounted in an optical header and limiting post-amplifier IC.The CATV receiver section uses high performance analog PD and low noise RF amplifier at 47~870MHz. The optical burst output can be enabled by a LVTTL logic high-level input of TX_BRST. Optical output can be disabled by a LVTTL logic high-level input of TX_DIS. Signal Detected (SD) output is provided to indicate the detection of an input optical signal of digital receiver. CATV receiver input optical power level can be monitored by analog signal ANALOG_SD. downstream and 47M~870M CATV analog signal. Burst mode operation transmitter with 1310nm FP laser. Continuous mode operation digital receiver with 1490nm high sensitivity PIN-TIA. 47~870M CATV receiver with 1550nm analog PD. Suitable for Voice/Data/Video FTTx applications. 0~70℃ operating temperature. Compact package with SC/APC pigtail. Single 3.3V power supply for digital transceiver. Dual 5V/12V power supply for CATV receiver. LVPECL compatible data input and data output interface. LVTTL transmitter burst -mode control LVTTL transmitter disable control LVTTL digital receiver signal-detected indication CATV receiver input optical power monitor output Low EMI and excellent ESD protection Class I laser safety standard IEC-60825 compliant RoHS compliance (FTM-9812T-C10G) Applications Gigabit Ethernet Passive Optical Networks (GEPON) – ONU side Fiberxon Proprietary and Confidential, Do Not Copy or Distribute Page 1 of 12 GEPON ONU Triplexer IEEE 802.3ah TM FTM-9812T-C10(G) Aug. 10, 2007 1000BASE-PX10U Regulatory Compliance The triplexer has been tested according to American and European product safety and electromagnetic compatibility regulations (See Table 1). For further information regarding regulatory certification, please refer to FlexonTM regulatory specification and safety guidelines, or contact with Fiberxon, Inc. America sales office listed at the end of documentation. Table 1 - Regulatory Compliance Feature Electrostatic Discharge (ESD) to the Electrical Pins Electromagnetic Interference (EMI) Immunity Laser Eye Safety Component Recognition MIL-STD-883E Method 3015.7 FCC Part 15 Class B EN55022 Class B (CISPR 22B) VCCI Class B IEC 61000-4-3 FDA 21CFR 1040.10 and 1040.11 EN60950, EN (IEC) 60825-1,2 UL and CSA Compliant with standards Compliant with Class I laser product Compliant with standards Compliant with standards Standard Performance Class Ⅰ(>500 V) Absolute Maximum Ratings Absolute Maximum Ratings are those values, beyond which, some damages may occur to the devices. Exposure to conditions above the Absolute Maximum Ratings listed in Table 2 may negatively impact the reliability of the products. Table 2 - Absolute Maximum Ratings Parameter Storage Ambient Temperature Operating Case Temperature Operating Humidity Power Supply Voltage Input Voltage Digital Receiver Damaged Threshold CATV Receiver Damaged Threshold Soldering Temperature Bending Radius Pigtail Fiber Contact Temperature 30 85 Symbol TSTG TOPR HOPR VCC VDD_5V VDD_12V Min. -40 0 5 0 0 0 GND +7 +3 380/10 240/10 Max. 85 70 95 4 6 15 VCC V dBm dBm °C/s °C/s mm °C 1 2 Unit °C °C % V Digital Transceiver CATV Receiver Digital Transceiver Note Note 1: Only for soldering by iron Note 2: Only for wave soldering Fiberxon Proprietary and Confidential, Do Not Copy or Distribute Page 2 of 12 GEPON ONU Triplexer IEEE 802.3ah TM FTM-9812T-C10(G) Aug. 10, 2007 1000BASE-PX10U Recommended Operating Conditions Table 3 - Recommended Operating Conditions Parameter Power Supply Voltage Operating Case Temperature Operating Humidity Data Rate (Upstream/Downstream) Data Rate Drift CATV Receiver Bandwidth -100 47 Symbol VCC VDD_5V VDD_12V TOPR HOPR Min. 3.13 4.75 11.4 0 5 1250 +100 860 Typ. Max. 3.47 5.25 12.6 70 95 Unit V V V °C % Mbit/s ppm MHz Note 3.3V±5% 5V±5% 12V±5% Optical and Electrical Characteristics Table 4 - Transmitter Optical and Electrical Characteristics (0°C