OTP-345V1-PE

FSAN High Power Triplexer OTP-345V1-PF-622-SCA-D4 Features • Low Cost 1310nm FP Design, 1490nm Digital Receiver, and 1555nm Analog Receiver • High Isolation • Multiple TIA Version for 155, 622, 1250 Mbps Applications • 1 GHz Video Reciever Bandwidth • Compliant to FSAN Class B ITU-T G.983.3 Specification • Support ITR-B1F-AF4-1 Absolute Maximum Ratings Parameter Operating Temperature Storage Temperature Module Characteristics Note1 Parameter 1555nm Video to 1490nm Rx isolation (a) Min -40 -40 Typical - Max 85 85 Unit ºC ºC Min 32 34 22 17 - Typical - Max -47 -47 -6 -32 -20 Unit dB dB dB dB dB dB dB dB dB 1490nm data to 1555nm Rx isolation (b) 1310nm external to 1555nm Video isolation 1310nm external to 1490nm data isolation 1310nm Tx to 1490nm Rx crosstalk 1310nm Tx to 1555nm Rx crosstalk Back Reflection @ 1310nm Back Reflection @ 1555nm Back Reflection @ 1490nm (a) 1550nm to 1560nm isolation at digital receiver (b) 1480nm to 1500nm isolation at video receiver Transmitter Characteristics Note1 Parameter Wavelength Spectral Width Typical 1/2 Ppeak set point @25ºC Tracking Error 1/2 Ppeak over temp Bias Current (=Ith+1/2Imod) Threshold Current Modulation Current (e) - - Note 1) All data is specified at EOL and across the operating temperature range. Symbol λ ∆λ Pset TE 1/2Ppeak Ibias,EOL Ith (@ Pset) Imod IPD,mon IPD,mon Vf tr/tf ID CPD QE Min 1260 -3 0.5 2 Typical 2 1.5 1.2 10 - Max 1360 3 3 3.5 75 50 60 1500 1300 1.7 0.5 1 15 0.3 Unit nm nm dBm dB dBm mA mA mA µA µA Volts ns µA pF mW/mA 10 100 100 - PD Monitor Current (@ Pset) @25ºC PD Monitor Current (@ Pset) -40ºC and 85ºC Forward Voltage Rise/Fall Time (c) PD Monitor Dark Current PD Monitor Capacitance (d) Quantum Efficiency 0.045 Note 1) All data is specified at EOL and across the operating temperature range. (c) 10% to 90% (d) VRD = 10V (e) greater modulation current can be used to increase output power LUMINENTOIC.COM 20550 Nordhoff St. • Chatsworth, CA 91311 • tel: 818.773.9044 • fax: 818.576.9486 9F, No 81, Shui Lee Rd. • Hsinchu, Taiwan, R.O.C. • tel: 886.3.5169222 • fax: 886.3.5169213 LUMNDS826-AUG0105 rev. A.1 1 FSAN High Power Triplexer OTP-345V1-PF-622-SCA-D4 Digital Receiver Electrical Characteristics (622 Mbps) Parameter Detection Wavelength Gain, Differential Sensitivity Optical Input Overload Optical Input Power Damage Threshold Supply Voltage Supply Current (a) High Frequency -3 dB point (b) Single-ended Output Voltage (p-p) @100mA p-p Single-ended Output Resistance Small Signal Transresistance, differential Polarization Dependent Loss (a) AC coupled; RL = 50 Ohm (b) Ci = 0.7 pF Analog Receiver Characteristics Parameter Detection Wavelength Optical Input power Damage Threshold Responsivity Bandwidth (a) Dark Current at Vr=5V Capacitance at Vr =5V and 1 MHz DSO DTB Polarization Dependent Loss (a) 0.5 dB measurement PDL Symbol λ Pdamage R BW Id C Min 1550 3 0.75 1000 Typical 1555 0.85 2 0.6 Max 1560 50 1.5 -70 -80 0.5 Unit nm dBm mA/mW MHz nA pF dBc dBc dB VCC ICC f-3dB(h) Vo(se)(p-p) Ro(se) Rtr PDL Symbol λ G - Min 1480 12 -4 3 3.135 20 400 40 7 - Typical 3.3 35 520 50 - Max 1500 -29 3.465 50 600 450 62 25 0.5 Unit nm mV/µW dBm dBm dBm V mA MHz mV Ohm KΩ dB Pin LUMINENTOIC.COM 20550 Nordhoff St. • Chatsworth, CA 91311 • tel: 818.773.9044 • fax: 818.576.9486 9F, No 81, Shui Lee Rd. • Hsinchu, Taiwan, R.O.C. • tel: 886.3.5169222 • fax: 886.3.5169213 2 LUMNDS826-AUG0105 rev. A.1 FSAN High Power Triplexer OTP-345V1-PF-622-SCA-D4 Outline Drawing Mechanical Drawing PIN PIN-TIA PIN-TIA Pin Assignment PD+ PD- Functional Schematic LUMINENTOIC.COM 20550 Nordhoff St. • Chatsworth, CA 91311 • tel: 818.773.9044 • fax: 818.576.9486 9F, No 81, Shui Lee Rd. • Hsinchu, Taiwan, R.O.C. • tel: 886.3.5169222 • fax: 886.3.5169213 3 LUMNDS826-AUG0105 rev. A.1 FSAN High Power Triplexer OTP-345V1-PF-622-SCA-D4 Ordering Information Available Options: OTP-345V1-PF-622-SCA-D4 Part Numbering Definition: M in. O T P - 3 4 5 V 1 - H a l f Pe a k O u t p u t Po w e r C o n n e ct o r D i g i t a l T I A - I s o l a t o r - C o n n e ct o r T y p e - D e s i g n s p e ci f i c - • B la n k = N o T IA 155 • PX PA A = -1 3 t o -1 6 d B m PA = -9 t o -1 3 d B m PB = -6 t o -9 d B m PC = -3 t o -6 d B m PD = -1 t o -3 d B m P E = - 1 t o +1 d B m P F = +1 t o +3 d B m 622 1250 • B la n k = N o Iso la t o r I = Iso la t o r • S CX LCX FC X STX X = A (a ngled) X = U (u lt r a ) • D 4 : PI N a n d PI N T I A a s s i g n m e n t s r o t a t e 1 8 0 a e g r e e , Cu s t o m e r P/ N : 7 2 8 -0 0 0 2 6 1 -0 6 • B l a n k = Pi g t a i l R L = R e ce p t a cl e LC R S = R e ce p t a cl e S C Warnings: Handling Precautions: This device is susceptible to damage as a result of electrostatic discharge (ESD). A static free environment is highly recommended. Follow guidelines according to proper ESD procedures. Laser Safety: Radiation emitted by laser devices can be dangerous to human eyes. Avoid eye exposure to direct or indirect radiation. Legal Notes: IMPORTANT NOTICE! All information contained in this document is subject to change without notice, at LuminentOIC’s sole and absolute discretion. LuminentOIC warrants performance of its products to current specifications only in accordance with the company’s standard one-year warranty; however, specifications designated as “preliminary” are given to describe components only, and LuminentOIC expressly disclaims any and all warranties for said products, including express, implied, and statutory warranties, warranties of merchantability, fitness for a particular purpose, and non-infringement of proprietary rights. Please refer to the company’s Terms and Conditions of Sale for further warranty information. LuminentOIC assumes no liability for applications assistance, customer product design, software performance, or infringement of patents, services, or intellectual property described herein. No license, either express or implied, is granted under any patent right, copyright, or intellectual property right, and LuminentOIC makes no representations or warranties that the product(s) described herein are free from patent, copyright, or intellectual property rights. Products described in this document are NOT intended for use in implantation or other life support applications where malfunction may result in injury or death to persons. LuminentOIC customers using or selling products for use in such applications do so at their own risk and agree to fully defend and indemnify LuminentOIC for any damages resulting from such use or sale. THE INFORMATION CONTAINED IN THIS DOCUMENT IS PROVIDED ON AN “AS IS” BASIS. Customer agrees that LuminentOIC is not liable for any actual, consequential, exemplary, or other damages arising directly or indirectly from any use of the information contained in this document. Customer must contact LuminentOIC to obtain the latest version of this publication to verify, before placing any order, that the information contained herein is current. © LuminentOIC, Inc. 2005 All rights reserved LUMINENTOIC.COM 20550 Nordhoff St. • Chatsworth, CA 91311 • tel: 818.773.9044 • fax: 818.576.9486 9F, No 81, Shui Lee Rd. • Hsinchu, Taiwan, R.O.C. • tel: 886.3.5169222 • fax: 886.3.5169213 4 LUMNDS826-AUG0105 rev. A.1