T-11-2500-P-SST

2.5Gbps PIN-TIA Receiver ModulesReceptacle & Pigtailed (5V) T-11-2500-R/P-XXX Features • InGaAs/InP PIN Photodiode with transimpedance amplifier • High sensitivity with AGC* • Differential ended output • Single+5V operation • -40 to 85ºC operating temperature • FC/ST/SC receptacle package • SM/MM fiber pigtailed package with optional FC/ST/SC connector • 2.5Gbps SDH/SONET/ATM receivers application Absolute Maximum Rating (Tc=25ºC ) Parameter Supply Voltage Operating Temperature Storage Temperature DC Electrical Characteristics( Tc=25ºC ) Parameter Power Supply Differential Output Voltage Supply Current (no load) Symbol VCC Vd ICC Min 4.5 0.22 Typical 5 0.38 34 Max 5.5 0.57 63 Unit V V mA Symbol VCC Topr Tstg Value 6 -40 to +85 -40 to +85 Unit V ºC ºC (Operating at Vcc=5V, Tc=25ºC, λ=1310nm, 9/125µm SM fiber) AC/Optical and Electrical Characteristics( Tc=25ºC ) Parameter Detection Range Gain @ 10Mbps Differential Bandwidth ( to -3dB point) Saturation Power Sensitivity Output Resistance Connector Options Model T-11-2500-R-SFC T-11-2500-R-SST T-11-2500-R-SSC T-11-2500-P-S(M)FC T-11-2500-P-S(M)ST T-11-2500-P-S(M)SC T-11-2500-P-S(M) Package Receptacle Fiber Connector FC ST SC FC ST SC G BW Psat Sens Rout Symbol Min 1100 1.5 1500 -3 48 Typical 1310 2.3 2000 0 -21 50 Max 1650 3.2 -18 52 Unit nm V/mW MHz dBm dBm ohm -10 Test Condition Measure differentially AC coupled RL=50Ω BER=10 @2.5Gbps, PRBS23 BER=10-10 @2.5Gbps, PRBS23 - Pigtailed SM (MM) 1 2.5Gbps PIN-TIA Receiver ModulesReceptacle & Pigtailed (5V) T-11-2500-R/P-XXX Outline drawing-Receptacle PIN-TIA Receiver Modules-Receptacle Units in mm 2 2.5Gbps PIN-TIA Receiver ModulesReceptacle & Pigtailed (5V) T-11-2500-R/P-XXX Outline drawing-Pigtailed PIN-TIA Receiver Modules-Pigtailed Units in mm 3 2.5Gbps PIN-TIA Receiver ModulesReceptacle & Pigtailed (5V) T-11-2500-R/P-XXX Pin Assignment Pin assignment 1 ~Vc c 2 ~D o u t 3 ~D o u t 4 ~G ND ( C A SE ) Warnings Handling Precautions: This device is susceptible to damage as a result of electrostatic discharge (ESD). A static free environment is highly recommended. Follow guidelines according to proper ESD procedures. Laser Safety: Radiation emitted by laser devices can be dangerous to human eyes. Avoid eye exposure to direct or indirect radiation. Legal Notice IMPORTANT NOTICE! All information contained in this document is subject to change without notice, at Luminentʼs sole and absolute discretion. Luminent warrants performance of its products to current specifications only in accordance with the companyʼs standard one-year warranty; however, specifications designated as “preliminary” are given to describe components only, and Luminent expressly disclaims any and all warranties for said products, including express, implied, and statutory warranties, warranties of merchantability, fitness for a particular purpose, and non-infringement of proprietary rights. Please refer to the companyʼs Terms and Conditions of Sale for further warranty information. Luminent assumes no liability for applications assistance, customer product design, software performance, or infringement of patents, services, or intellectual property described herein. No license, either express or implied, is granted under any patent right, copyright, or intellectual property right, and Luminent makes no representations or warranties that the product(s) described herein are free from patent, copyright, or intellectual property rights. Products described in this document are NOT intended for use in implantation or other life support applications where malfunction may result in injury or death to persons. Luminent customers using or selling products for use in such applications do so at their own risk and agree to fully defend and indemnify Luminent for any damages resulting from such use or sale. THE INFORMATION CONTAINED IN THIS DOCUMENT IS PROVIDED ON AN “AS IS” BASIS. Customer agrees that Luminent is not liable for any actual, consequential, exemplary, or other damages arising directly or indirectly from any use of the information contained in this document. Customer must contact Luminent to obtain the latest version of this publication to verify, before placing any order, that the information contained herein is current. © Luminent, Inc. 2003 All rights reserved 20550 Nordhoff St. • Chatsworth, CA 91311 • tel: 818.773.9044 • fax: 818.576.9486 • LUMINENT.COM LUMNDS558-0803 4