T-11-2500-P3-SSC-APC-01

2.5Gbps PIN-TIA Receiver Modules (3.3V) T-11-2500-P3-SSC/APC-01-XX • InGaAs/InP PIN Photodiode with transimpedance amplifier • High sensitivity with AGC* • Differential ended output • Single+3.3V operation • -40~85ºC operating temperature • SM fiber pigtailed with SC/APC connector • 2.5Gbps SDH/SONET/ATM receivers • RoHS Compliant available Features Absolute Maximum Ratings (Tc=25ºC) Parameter Supply Voltage Operating Temperature Storage Temperature Symbol VCC Topr Tstg Value 3.8 -40 ~ 85 -40 ~ 85 Unit V ºC ºC DC Electrical Characteristics (Tc=25ºC) Parameter Power Supply Differential Ouptput Voltage Supply Current (no load) Symbol VCC Vd Icc Min. 3.0 - Typ. 3.3 0.6 26 Max. 3.6 38 Unit V V mA (Operating at VCC=3.3V,Tc=25ºC, λ=1310nm, 9/125µm SM fiber ) AC/Optical and Electrical Characteristics (Tc=25ºC) Parameter Detection Range Gain@10Mbps Differential Bandwidth Saturation Power Sensitivity Output Resistance Symbol - Min 1100 1.7 -3 40 Typ 1310 27 1.9 0 -21 53 Max 1650 -18 65 Unit nm V/mW GHz dBm dBm ohm Test Conditions λ=1310nm λ=1310nm BER=10-10@2.5Gbps, PRBS23 VRPD=5V, f=1MHz G BW Psat Sens. Rout Note: 1.Pin assignment can be customized. 2.Specifications subject to change without notice. LUMINENTOIC.COM 20550 Nordhoff St. • Chatsworth, CA 91311 • tel: 818.773.9044 • fax: 818.576.9486 9F, No 81, Shui Lee Rd. • Hsinchu, Taiwan, R.O.C. • tel: 886.3.5169222 • fax: 886.3.5169213 LUMNDS1006-JUN1406 rev. A.2 1 2.5Gbps PIN-TIA Receiver Modules (3.3V) T-11-2500-P3-SSC/APC-01-XX Pin Assignment Pin Assignment Functional Schematic Packaging Dimension Units in mm. Part Number: T-11-2500-P3-SSC/APC-01-XX Flange Type " ":Flangeless Connector Type SC:SC/APC LUMINENTOIC.COM 20550 Nordhoff St. • Chatsworth, CA 91311 • tel: 818.773.9044 • fax: 818.576.9486 9F, No 81, Shui Lee Rd. • Hsinchu, Taiwan, R.O.C. • tel: 886.3.5169222 • fax: 886.3.5169213 LUMNDS1006-JUN1406 rev. A.2 2 2.5Gbps PIN-TIA Receiver Modules (3.3V) T-11-2500-P3-SSC/APC-01-XX Ordering Information T-11-2500-P3-SSC/APC-01-XX SC Connector Fiber Application S=SM 9/125µm -/G5/GR Blank = RoHS non-compliant product G5 = RoHS 5/6-compliant product (lead exemption) GR = Full RoHS compliant product (no exemption) RoHS Compliant Warnings Handling Precautions: This device is susceptible to damage as a result of electrostatic discharge (ESD). A static free environment is highly recommended. Follow guidelines according to proper ESD procedures. Laser Safety: Radiation emitted by laser devices can be dangerous to human eyes. Avoid eye exposure to direct or indirect radiation. Legal Notice IMPORTANT NOTICE! All information contained in this document is subject to change without notice, at Luminent＇s sole and absolute discretion. Luminent warrants performance of its products to current specifications only in accordance with the company＇s standard one-year warranty; however, specifications designated as “preliminary＂ are given to describe components only, and Luminent expressly disclaims any and all warranties for said products, including express, implied, and statutory warranties, warranties of merchantability, fitness for a particular purpose, and non-infringement of proprietary rights. Please refer to the company＇s Terms and Conditions of Sale for further warranty information. Luminent assumes no liability for applications assistance, customer product design, software performance, or infringement of patents, services, or intellectual property described herein. No license, either express or implied, is granted under any patent right, copyright, or intellectual property right, and Luminent makes no representations or warranties that the product(s) described herein are free from patent, copyright, or intellectual property rights. Products described in this document are NOT intended for use in implantation or other life support applications where malfunction may result in injury or death to persons. Luminent customers using or selling products for use in such applications do so at their own risk and agree to fully defend and indemnify Luminent for any damages resulting from such use or sale. THE INFORMATION CONTAINED IN THIS DOCUMENT IS PROVIDED ON AN “AS IS＂ BASIS. Customer agrees that Luminent is not liable for any actual, consequential, exemplary, or other damages arising directly or indirectly from any use of the information contained in this document. Customer must contact Luminent to obtain the latest version of this publication to verify, before placing any order, that the information contained herein is current. © LuminentOIC, Inc. 2006 All rights reserved LUMINENTOIC.COM 20550 Nordhoff St. • Chatsworth, CA 91311 • tel: 818.773.9044 • fax: 818.576.9486 9F, No 81, Shui Lee Rd. • Hsinchu, Taiwan, R.O.C. • tel: 886.3.5169222 • fax: 886.3.5169213 LUMNDS1006-JUN1406 rev. A.2 3