MM4XXG

Triple Balanced Mixer Multi-Octave Band Electrical Specifications:(1) Model MM4xxG RF 2.0 to 8.0 GHz Conditions Parameter SSB Conversion loss: (2) (3) Isolation LO to RF: LO to IF: RF to IF: Input 1-dB Compression Point: RF (GHz) 2.0-8.0 2.0-8.0 LO (GHz) IF (GHz) 2.0-8.0 3.0-5.0 2.0-8.0 2.0-6.0 2.0-8.0 2.0-8.0 2.0-8.0 2.0-6.0 Min Specifications Typical 6.3 dB 7.3 dB 23 dB 27 dB 27 dB +5 dBm +8 dBm +12 dBm +15 dBm +14 +17 +21 +24 +10 +13 +17 +21 dBm dBm dBm dBm dBm dBm dBm dBm MM44 MM46 MM47 MM48 MM44 MM46 MM47 MM48 MM44 MM46 MM47 MM48 Max 7.5 dB 8.5 dB Model MM4xxG LO Power 4 = +10 dBm 6 = +13 dBm 7 = +17 dBm 8 = +21 dBm Drop-In Module or With SMA(F) Connectors M = Module P = With Connectors 2.0-8.0 2.0-8.0 16 dB 18 dB Input Third Order Intercept Point: 2.0-8.0 2.0-8.0 2.0-6.0 LO Power: (4) 2.0-8.0 2.0-8.0 2.0-6.0 Notes: 1. Specifications are guaranteed when tested as a downconverter in a 50 Ohm system from -55˚ C to +100˚ C with the nominal LO power. Specifications indicated as typical are not guaranteed. 2. Noise figure is typically within ±0.5 dB of conversion loss. 3. Conversion loss typically degrades less than 0.5 dB at +100˚ C and improves less than 0.5 dB at -55˚ C. 4. Usable LO drives are up to 2 dB below and 3 dB above nominal. MM4xxG Typical Performance at 25˚C Outline: G SPECTRUM All dimensions are in inches and [mm]. Spectrum M icrowave · 2 144 F ranklin D rive N .E. · P alm B a y, F L 3 2905 · P H ( 888) 5 53-7531 · F ax ( 888) 5 53-753 2 Rev. 2/8/07 www.SpectrumMicrowave.com Spectrum M icrowave (Europe) · 2 707 Black Lake Place · P hiladelphia, PA 19154 · P H ( 215) 464-4000 · F ax ( 215) 464-4001