MM9XMS-3

Double Balanced Mixer Multi-Octave Band Electrical Specifications (1) Model MM9xMS-3 Model MM9xMS-13 RF 4.0 to 20.0 GHz Specifications Min Typical 6.5 dB 7.0 dB 8.0 dB 7.0 dB 7.5 dB 8.5 dB 30 dB 38 dB 21 dB 27 dB 20 dB +2 dBm +5 dBm +8 dBm +12 dBm +11 dBm +14 dBm +18 dBm +21 dBm +7 dBm +10 dBm +14 dBm +18 dBm Max 8.0 dB 8.5 dB 9.5 dB 9.5 dB 10.0 dB 11.5 dB LO Power 3 = +7 dBm 4 = +10 dBm 6 = +14 dBm 7 = +18 dBm : Conditions Parameter SSB Conversion loss:(2) (3) RF(GHz) 5.0-18.5 5.0-18.5 5.0-18.5 4.0-20.0 4.0-20.0 4.0-20.0 LO(GHz) 5.0-18.5 5.0-18.5 5.0-18.5 4.0-20.0 4.0-20.0 4.0-20.0 4.0-5.0 5.0-20.0 4.0-7.0 7.0-20.0 4.0-20.0 4.0-20.0 4.0-20.0 DC-4000 IF(MHz) DC-500 DC-2000 DC-4000 DC-500 DC-2000 DC-4000 Isolation LO to RF: LO to IF: RF to IF: Input 1-dB Compression Point: 20 25 16 20 dB dB dB dB Input Third Order Intercept Point: 4.0-20.0 4.0-20.0 DC-4000 LO Power: (4) 4.0-20.0 4.0-20.0 DC-4000 MM93 MM94 MM96 MM97 MM93 MM94 MM96 MM97 MM93 MM94 MM96 MM97 Notes: 1. Specifications are guaranteed when tested as a downconverter in a 50 Ohm system at +25˚C with the nominal LO power. Specifications indicated as typical are not guaranteed. 2. Noise figure is typically within ±0.5 dB of conversion loss for IF frequencies greater than 10 MHz. 3. Conversion loss typically degrades less than 0.5 dB at +100˚C and improves less than 0.5 dB at -55˚C. 4. Usable LO drives are up to 2 dB below and 3 dB above nominal. MM9xMS-3 Outline: MS3C Typical Performance at 25˚C MHz MM9xMS-13 Outline: MS3D All dimensions are in inches and [mm]. SP ECTRU INC. MHz MICROWAVE A Spectrum Control Business www.specwave.com SPECTRUM CONTROL GmbH • Hansastrasse 6 • 91126 Schwabach, Germany • Phone: (49)-9122-795-0 • Fax: (49)-9122-795-58 SPECTRUM MICROWAVE • 2144 Franklin Drive N.E. • Palm Bay, Florida 32905 • Phone: (888) 553-7531 • Fax: (888) 553-7532 625 Mixers M