MM9XMS

Double Balanced Mixer Multi-Octave Band Electrical Specifications: (1) Model MM9xMS Model MM9xMS-14 RF 1.5 to 19.0 GHz Max 9.0 dB 11.0 dB 11.5 dB Conditions Parameter SSB Conversion loss: (2) (3) Isolation LO to RF: LO to IF: RF to IF: IF to RF: Input 1-dB Compression Point: Input Third Order Intercept Point: LO Power: (4) RF (GHz) 2.0-18.0 2.0-18.0 1.5-19.0 LO (GHz) 2.0-18.0 2.0-18.0 1.5-19.0 1.5-4.0 4.0-19.0 1.5-19.0 1.5-19.0 0.5-6.5 0.5-6.5 IF (MHz) 2.0-5.0 0.5-6.5 0.5-6.5 Min Specifications Typical 6.8 dB 7.8 dB 8.0 dB 23 dB 31 dB 25 dB 27 dB 20 dB +5 dBm +8 dBm +12 dBm +15 dBm +14 dBm +17 dBm +21 dBm +24 dBm +10 dBm +13 dBm +17 dBm +21 dBm Model MM9xMS Model MM9xMS-14 1.5-19.0 1.5-19.0 17 dB 20 dB 20 dB LO Power 4 = +10 dBm 6 = +13 dBm 7 = +17 dBm 8 = +21 dBm 1.5-19.0 1.5-19.0 0.5-.6.5 1.5-19.0 1.5-19.0 0.5-6.5 MM94 MM96 MM97 MM98 MM94 MM96 MM97 MM98 MM94 MM96 MM97 MM98 Notes: 1. Specifications are guaranteed when tested as a downconverter in a 50 Ohm system at +25˚ C with the nominal LO power. Specifications indicated as typical are not guaranteed. 2. Noise figure is typically within ±0.5 dB of conversion loss for IF frequencies greater than 10 MHz. 3. Conversion loss typically degrades less than 0.5 dB at +100˚ C and improves less than 0.5 dB at -55˚ C. 4. Usable LO drives are up to 2 dB below and 3 dB above nominal. MM9xMS Outline: MS3AL Typical Performance at 25˚C MM9xMS-14 Outline: MS3BL All dimensions are in inches and [mm]. Spectrum M icrowave · 2 144 F ranklin D rive N .E. · P alm B a y, F L 3 2905 · P H ( 888) 5 53-7531 · F ax ( 888) 5 53-753 2 Rev. 4/24/08 www.SpectrumMicrowave.com Spectrum M icrowave (Europe) · 2 707 Black Lake Place · P hiladelphia, PA 19154 · P H ( 215) 464-4000 · F ax ( 215) 464-4001