Double Balanced Mixer
Multi-Octave Band
Electrical Specifications :
Parameter SSB Conversion loss: (2) (3) Isolation LO to RF: LO to IF: RF to IF: Input 1 dB Compression Point: Input Third Order Intercept Point: LO Power: (4)
(1)
Model MM9xxG-30
RF 6.0 to 18.0 GHz
Conditions
RF (GHz) 6.0-18.0 6.0-18.0 7.0-16.0 6.0-18.0 LO (GHz) 4.0-18.0 4.0-18.0 7.0-18.0 4.0-18.0 4.0-16.0 4.0-18.0 4.0-18.0 6.0-18.0 6.0-18.0 4.0-18.0 DC-4000 IF (MHz) DC-2000 DC-3000 DC-4000 DC-4000 Min
Specifications
Typical 5.5 dB 6.0 dB 6.2 dB 6.5 dB 40 dB 38 dB 27 dB 28 dB +2 dBm +5 dBm +8 dBm +12 dBm +11 dBm +14 dBm +18 dBm +23 dBm +7 dBm +10 dBm +14 dBm +19 dBm Max 7.5 dB 8.0 dB 8.0 dB 8.5 dB
Model MM9xxG-30
LO Power 3 = +7 dBm 4 = +10 dBm 6 = +14 dBm 7 = +19 dBm Drop-In Module or With SMA(F) Connectors M = Module P = With Connectors
25 dB 20 dB 20 dB
6.0-18.0
4.0-18.0 4.0-18.0
DC-4000 DC-4000
6.0-18.0
MM93 MM94 MM96 MM97 MM93 MM94 MM96 MM97 MM93 MM94 MM96 MM97
Notes: 1. Specifications are guaranteed when tested as a downconverter in a 50 Ohm system from -55˚ C to +100˚ C with the nominal LO power. Specifications indicated as typical are not guaranteed. 2. Noise figure is typically within ±0.5 dB of conversion loss for IF frequencies greater than 10 MHz. 3. Conversion loss typically degrades less than 0.5 dB at +100˚ C and improves less than 0.5 dB at -55˚ C. 4. Usable LO drives are up to 2 dB below and 3 dB above nominal.
MM9xxG-30
Outline: G
Typical Performance at 25 ˚C
SPECTRUM
All dimensions are in inches and [mm].
Spectrum M icrowave · 2 144 F ranklin D rive N .E. · P alm B a y, F L 3 2905 · P H ( 888) 5 53-7531 · F ax ( 888) 5 53-753 2
Rev. 4/26/07
www.SpectrumMicrowave.com Spectrum M icrowave (Europe) · 2 707 Black Lake Place · P hiladelphia, PA 19154 · P H ( 215) 464-4000 · F ax ( 215) 464-4001
很抱歉,暂时无法提供与“MM9XXG-30”相匹配的价格&库存,您可以联系我们找货
免费人工找货