MM9XXG-40

Double Balanced Mixer Ultra-Broadband Electrical Specifications: (1) Model MM9xxG-40 RF 0.5 to 18.0 GHz Model MM9xxG-40 Conditions Parameter SSB Conversion loss: (2) (3) Isolation LO to RF: LO to IF: RF to IF: Input 1 dB Compression Point: 0.5-18.0 0.5-18.0 RF (GHz) 0.5-18.0 0.5-18.0 LO (GHz) 0.5-18.0 0.5-18.0 0.5-1.0 1.0-18.0 0.5-1.0 1.0-2.5 2.5-18.0 0.5-18.0 DC-300 IF (MHz) DC-150 DC-300 Min Specifications Typical 6.5 dB 7.0 dB 20 30 12 16 31 30 dB dB dB dB dB dB MM93 MM94 MM96 MM97 MM93 MM94 MM96 MM97 MM93 MM94 MM96 MM97 Max 8.5 dB 9.0 dB LO Power 3 = +7 dBm 4 = +10 dBm 6 = +14 dBm 7 = +19 dBm Drop-In Module or With SMA(F) Connectors M = Module P = With Connectors 12 dB 20 dB 5 dB 10 dB 20 dB Input Third Order Intercept Point: 0.5-18.0 0.5-18.0 DC-300 LO Power: (4) 0.5-18.0 0.5-18.0 DC-300 +2 dBm +5 dBm +8 dBm +12 dBm +11 dBm +14 dBm +18 dBm +23 dBm +7 dBm +10 dBm +14 dBm +19 dBm Notes: 1. Specifications are guaranteed when tested as a downconverter in a 50 Ohm system from -55 C to +100 C with the nominal LO power. Specifications indicated as typical are not guaranteed. 2. Noise figure is typically within ± 0.5 dB of conversion loss for IF frequencies greater than 10 MHz. 3. Conversion loss typically degrades less than 0.5 dB at +100 C and improves less than 0.5 dB at -55 C. 4. Usable LO drives are up to 2 dB below and 3 dB above nominal. Typical Performance at 25° C MM9xxG-40 Outline: G- .015D All dimensions are in inches and [mm]. Spectrum M icrowave · 2 144 F ranklin D rive N .E. · P alm B a y, F L 3 2905 · P H ( 888) 5 53-7531 · F ax ( 888) 5 53-753 2 www.SpectrumMicrowave.com Spectrum M icrowave · 2 707 Black Lake Place · P hiladelphia, PA 19154 · P H ( 215) 464-4000 · F ax ( 215) 464-4001 Rev. 2/14/08