MM9XXN-1

Triple Balanced Mixer Electrical Specifications Parameter SSB Conversion loss:(2) (3) Isolation LO to RF: LO to IF: RF to IF: IF to RF: Input 1 dB Compression Point: Input Third Order Intercept Point: LO Power: (4) Model MM9xxN-1 RF 2.0 to 19.0 GHz Ultra-Broadband (1) : Conditions RF (GHz) 3.0-17.0 3.0-19.0 3.0-19.0 2.0-19.0 LO (GHz) 3.0-17.0 3.0-19.0 3.0-19.0 2.0-19.0 2.0-19.0 2.0-19.0 2.0-19.0 1.0-9.0 1.0-9.0 IF (GHz) 2.0-6.0 2.0-8.0 1.0-9.0 1.0-9.0 Min Specifications Typical 7.0 dB 7.5 dB 8.0 dB 8.0 dB 24 dB 30 dB 22 dB 25 dB +5 dBm +8 dBm +12 dBm +15 dBm +14 dBm +17 dBm +21 dBm +24 dBm +10 dBm +13 dBm +17 dBm +21 dBm Max 9.5 dB 11.0 dB 12.5 dB 13.5 dB Model MM9xxN-1 LO Power 4 = +10 dBm 6 = +13 dBm 7 = +17 dBm 8 = +21 dBm Drop-In Module or With SMA(F) Connectors M = Module P = With Connectors 2.0-19.0 2.0-19.0 15 dB 17 dB 2.0-19.0 2.0-19.0 1.0-9.0 2.0-19.0 2.0-19.0 1.0-9.0 MM94 MM96 MM97 MM98 MM94 MM96 MM97 MM98 MM94 MM96 MM97 MM98 Notes: 1. Specifications are guaranteed when tested as a downconverter in a 50 Ohm system from -55˚ C to +100˚ C with the nominal LO power. Specifications indicated as typical are not guaranteed. 2. Noise figure is typically within ±0.5 dB of conversion loss. 3. Conversion loss typically degrades less than 0.5 dB at +100˚ C and improves less than 0.5 dB at -55˚ C. 4. Usable LO drives are up to 2 dB below and 3 dB above nominal. Outline: N MM9xxN-1 Typical Performance at 25˚C SPECTRUM All dimensions are in inches and [mm]. Spectrum M icrowave · 2 144 F ranklin D rive N .E. · P alm B a y, F L 3 2905 · P H ( 888) 5 53-7531 · F ax ( 888) 5 53-753 2 www.SpectrumMicrowave.com Spectrum M icrowave (Europe) · 2 707 Black Lake Place · P hiladelphia, PA 19154 · P H ( 215) 464-4000 · F ax ( 215) 464-4001