10A4

10A01 - 10A10 10A Axial Silicon Rectifier PRODUCT SUMMARY Voltage range 50 to 1000 Volts Axial package Rated 10.0 Amps at TA=50°C P600 FEATURES Low forward voltage drop Low reverse leakage current High current capability High surge-current capability MECHANICAL DATA Case: molded plastic Epoxy: UL 94V-O rated flame retardant Lead: axial leads, matte-Sn plated, solderable per MIL-STD-202, Method 208 guaranteed Polarity: color band denotes cathode end High temperature soldering guaranteed: o 260 C for 10 seconds with 0.375” (9.5mm) lead lengths Weight: 2.1 grams Dimensions in inches and (millimeters) Pb-free, RoHS compliant. MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Rating at 25°C ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20% Parameter Maximum recurrent peak reverse voltage Maximum RMS voltage Maximum DC blocking voltage Maximum average forward rectified current with 0.375" (9.5mm) lead lengths at TA = 50°C Peak forward surge current, 8.3 ms single half sine-wave superimposed on rated load (JEDEC method ) Maximum instantaneous forward voltage at 10.0A Maximum DC reverse current at TJ=25°C at rated DC blocking voltage at TJ=100°C Typical junction capacitance Typical thermal resistance Operating temperature range Storage temperature range (Note 1) (Note 2) Symbol 10A 10A1 10A2 10A4 10A6 10A8 10A 05 10 Units V V V A A V uA uA pF °C/W °C °C VRRM VRMS VDC I(AV) IFSM VF IR Cj Rθ JA TJ TSTG 50 35 50 100 70 100 200 140 200 400 280 400 10.0 600 600 420 600 800 1000 560 700 800 1000 1.0 10 100 150 10 -65 to +125 -65 to +150 Notes: 1. Measured at 1 MHz with applied reverse voltage of 4.0 V D.C. 2. Thermal resistance from junction to ambient 9/1/2006 Rev.4.01 www.SiliconStandard.com 1 of 2 10A01 - 10A10 RATINGS AND CHARACTERISTIC CURVES 1000 AVERAGE FORWARD RECTIFIED CURRENT AMPERES FIG.1- MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT FIG.2- MAXIMUM FORWARD CURRENT DERATING CURVE 12 10 8 6 4 2 0 o PEAK FORWARD SURGE CURRENT. (A) 800 600 400 200 0 1 2 4 6 8 10 20 40 60 80 100 25 50 NUMBER OF CYCLES AT 60Hz 75 100 125 o AMBIENT TEMPERATURE. ( C) 150 175 FIG.3- TYPICAL JUNCTION CAPACITANCE 1000 FIG.4- TYPICAL FORWARD CHARACTERISTICS 100 INSTANTANEOUS FORWARD CURRENT. (A) JUNCTION CAPACITANCE.(pF) 10 100 1 10 1 1 4 10 REVERSE VOLTAGE. (V) 100 0.1 0.4 0.6 0.8 1.0 1.2 FORWARD VOLTAGE. (V) 1.4 1.6 Information furnished by Silicon Standard Corporation is believed to be accurate and reliable. However, Silicon Standard Corporation makes no guarantee or warranty, express or implied, as to the reliability, accuracy, timeliness or completeness of such information and assumes no responsibility for its use, or for infringement of any patent or other intellectual property rights of third parties that may result from its use. Silicon Standard reserves the right to make changes as it deems necessary to any products described herein for any reason, including without limitation enhancement in reliability, functionality or design. No license is granted, whether expressly or by implication, in relation to the use of any products described herein or to the use of any information provided herein, under any patent or other intellectual property rights of Silicon Standard Corporation or any third parties. 9/1/2006 Rev.4.01 www.SiliconStandard.com 2 of 2