1N4002

1N4004 General Purpose Plastic Rectifiers PRODUCT SUMMARY Reverse Voltage 50 to 1000 Volts Forward current 1.0 Ampere FEATURES Plastic package has Underwriters Laboratories Flammability Classification 94V-0 Construction utilizes void-free molded plastic technique Low reverse leakage High forward surge capability High temperature soldering guaranteed: o 250 C /10 seconds, 0.375" (9.5mm) lead length, 5 lbs. (2.3kg) tension o o TJ is 150 C (Max.) and TSTG is 175 C (Max.) with PI glue MECHANICAL DATA Case: JEDEC DO-204AL (DO-41)/A-405, molded plastic body Terminals: Plated axial leads, solderable per MIL-STD-750, Method 2026 Polarity: Color band denotes cathode end Mounting Position: Any Weight: DO-41 - 0.012 ounce, 0.33 gram A-405 - 0.008 ounce, 0.23 gram Note: Lead diameter is 0.025(0.64)/0.021(0.53) for suffix “S” part numbers Pb-free; RoHS-compliant 07/04/2007 Rev.1.00 www.SiliconStandard.com 1 1N4004 MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25 C ambient temperature unless otherwise specified. o Parameter Maximum repetitive peak reverse voltage Maximum RMS voltage Maximum DC blocking voltage Maximum average forward rectified current 0.375" (9.5mm) lead length at TA=50oC Peak forward surge current 8.3ms single half sine-wave superimposed on rated load (JEDEC Method) TA=50oC Maximum full load reverse current, full cycle average 0.375" (9.5mm) lead length at TL=75oC Maximum instantaneous forward voltage at 1.0A Maximum DC reverse current at rated DC blocking voltage Typical reverse recovery time at IFM=20mA, IRM=1mA (Note 2) Typical junction capacitance at 4.0V, 1MHz Typical thermal resistance (Note 1) Operating junction temperature range Storage temperature range TA=25oC TA=100oC Symbols VRRM VRMS VDC IF(AV) IFSM IR(AV) VF IR trr CJ RθJA RθJL TJ TSTG 1N 4001 50 35 50 1N 4002 100 70 100 1N 4003 200 140 200 1N 4004 400 280 400 1.0 1N 4005 600 420 600 1N 4006 800 560 800 1N 4007 1000 700 1000 Units Volts Volts Volts Amp 30.0 Amps uA Volts uA uS pF o 30 1.1 5.0 50 1.0 15 50.0 25.0 -55 to +125 -55 to +150 C/W o C C o Notes: 1. Thermal resistance from junction to ambient, and from junction to lead at 0.375" (9.5mm) lead length, P.C.B. mounted 2. Measured on Tektronix type "S" recovery plug-in. Tektronix 545 scope or equivalent 07/04/2007 Rev.1.00 www.SiliconStandard.com 2 1N4004 RATINGS AND CHARACTERISTIC CURVES (TA=25 Cunless otherwise noted) o Information furnished by Silicon Standard Corporation is believed to be accurate and reliable. However, Silicon Standard Corporation makes no guarantee or warranty, expressed or implied, as to the reliability, accuracy, timeliness or completeness of such information and assumes no responsibility for its use, or for infringement of any patent or other intellectual property rights of third parties that may result from its use. Silicon Standard reserves the right to make changes as it deems necessary to any products described herein for any reason, including without limitation enhancement in reliability, functionality or design. No license is granted, whether expressly or by implication, in relation to the use of any products described herein or to the use of any information provided herein, under any patent or other intellectual property rights of Silicon Standard Corporation or any third parties. 07/04/2007 Rev.1.00 www.SiliconStandard.com 3