1N5408

1N5400-1N5408 3A Silicon Rectifiers PRODUCT SUMMARY Voltage ratings available from 50 Volts to 1000 Volts FEATURES Low forward voltage drop High current capability High reliability High surge current capability DO-201AD MECHANICAL DATA Case: Molded plastic Epoxy: UL 94V-O rate flame retardant Lead: Axial leads, matte tin plating Polarity: Color band denotes cathode end High temperature soldering guaranteed: 260°C for 10 seconds with 0.375” (9.5mm) lead lengths at 5 lbs. (2.3kg) tension Weight: 1.2 grams Pb-free; RoHS-compliant Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Rating at 25°C ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20% Parameter Maximum recurrent peak reverse voltage Maximum RMS voltage Maximum DC blocking voltage Maximum average forward rectified current 0.375 (9.5mm) lead length at TA = 75°C Peak forward surge current, 8.3 ms single half sine-wave superimposed on rated load (JEDEC method ) Maximum instantaneous forward voltage at 3.0A Maximum DC reverse current at T A=25°C at rated DC blocking voltage at T A=100°C Maximum full load reverse current, full cycle average 0.5”(12.5mm) lead length at TL=90°C Typical junction capacitance ( Note 1 ) Typical thermal resistance ( Note 2 ) Operating temperature range Storage temperature range Symbol 1N 5400 1N 5401 1N 5402 1N 5404 1N 5406 1N 5407 1N 5408 Units V V V A A V uA uA uA pF °C/W °C °C VRRM VRMS VDC I(AV) IFSM VF IR 50 35 50 100 70 100 200 140 200 400 280 400 3.0 200 1 .2 10.0 600 420 600 800 1000 560 700 800 1000 500 HTIR Cj Rθ TJ TSTG JA 500 30 20 -55 to +125 -55 to +150 Notes: 1. Measured at 1 MHz and applied reverse voltage of 4.0 V D.C. 2. Mounted with 0.375" (9.5mm) lead length on copper pads, size 20mm x 20mm, on P.C.B. 9/21/2006 Rev.4.01 www.SiliconStandard.com 1 of 2 1N5400-1N5408 RATINGS AND CHARACTERISTIC CURVES Information furnished by Silicon Standard Corporation is believed to be accurate and reliable. However, Silicon Standard Corporation makes no guarantee or warranty, expressed or implied, as to the reliability, accuracy, timeliness or completeness of such information and assumes no responsibility for its use, or for infringement of any patent or other intellectual property rights of third parties that may result from its use. Silicon Standard reserves the right to make changes as it deems necessary to any products described herein for any reason, including without limitation enhancement in reliability, functionality or design. No license is granted, whether expressly or by implication, in relation to the use of any products described herein or to the use of any information provided herein, under any patent or other intellectual property rights of Silicon Standard Corporation or any third parties. 9/21/2006 Rev.4.01 www.SiliconStandard.com 2 of 2