6A4

6A05 thru 6A10 General Purpose Plastic Rectifiers PRODUCT SUMMARY Reverse Voltage 50 to 1000 Volts Forward Current 6.0 Amperes FEATURES Low forward voltage drop High current capability High reliability High surge current capability TJ is 150oC (Max.) and TSTG is 175oC (Max.) with PI glue MECANICAL DATA Cases: Molded plastic R-6 Epoxy: UL 94V-O rate flame retardant Lead: Axial leads, solderable per MIL-STD-202, Method 208 guaranteed Polarity: Color band denotes cathode end High temperature soldering guaranteed: 250oC/10 seconds .375" (9.5mm) lead lengths at 5 lbs., (2.3kg) tension Weight: 0.074 ounce, 2.1 grams Pb-free; RoHS-compliant 02/15/2008 Rev.1.00 www.SiliconStandard.com 1 6A05 thru 6A10 MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS o Ratings at 25 C ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20% Parameter Maximum repetitive peak reverse voltage Maximum RMS voltage Maximum DC blocking voltage Maximum average forward rectified current 0.375" (9.5mm) lead length @TA=60oC Peak forward surge current, 8.3 ms single half sine-wave superimposed on rated load (JEDEC Method) Maximum instantaneous forward voltage @ 6.0A Maximum DC reverse current at rated DC blocking voltage @TA=25oC @TA=100oC Symbols VRRM VRMS VDC I(AV) IFSM VF IR IR(AV) CJ RθJA TJ TSTG 6A05 50 35 50 6A1 100 70 100 6A2 200 140 200 6A4 400 280 400 6.0 6A6 600 420 600 6A8 800 560 800 6A10 1000 700 1000 Units Volts Volts Volts Amps 400.0 0.95 10.0 400 50 100 10.0 -55 to +125 -55 to +150 Amps Volts uA uA pF o Maximum full load reverse current full cycle average, .375" (9.5mm) lead length @TA=75oC Typical junction capacitance (Note 1) Typical thermal resistance (Note 2) Operating junction temperature range Storage temperature range C/W o C C o Notes: 1. Measured at 1 MHz and Applied Reverse Voltage of 4.0 V D.C. 2. Thermal Resistance from Junction to Ambient .375” (9.5mm) Lead Length 02/15/2008 Rev.1.00 www.SiliconStandard.com 2 6A05 thru 6A10 RATINGS AND CHARACTERISTIC CURVES (TA=25 C unless otherwise noted) o Information furnished by Silicon Standard Corporation is believed to be accurate and reliable. However, Silicon Standard Corporation makes no guarantee or warranty, expressed or implied, as to the reliability, accuracy, timeliness or completeness of such information and assumes no responsibility for its use, or for infringement of any patent or other intellectual property rights of third parties that may result from its use. Silicon Standard reserves the right to make changes as it deems necessary to any products described herein for any reason, including without limitation enhancement in reliability, functionality or design. No license is granted, whether expressly or by implication, in relation to the use of any products described herein or to the use of any information provided herein, under any patent or other intellectual property rights of Silicon Standard Corporation or any third parties. 02/15/2008 Rev.1.00 www.SiliconStandard.com 3