GBL06

GBL02 Glass Passivated Single-Phase Bridge Rectifiers PRODUCT SUMMARY Reverse Voltage 50 to 1000 Volts Forward Current 4.0 Amperes FEATURES Ideal for printed circuit boards High surge current capability Typical IR less than 0.1µA High case dielectric strength Solder Dip 260 oC, 40 seconds MECHANICAL DATA Case: GBL Epoxy meets UL-94V-0 Flammability rating Terminals: Matte tin plated (E3 Suffix) leads, solderable per J-STD-002B and JESD22-B102D Polarity: As marked on body TYPICAL APPLICATIONS Package outline dimensions in inches (millimeters) General purpose use in ac-to-dc bridge full wave rectification for Monitor, TV, Printer, SMPS, Adapter, Audio equipment, and Home Appliances application Pb-free; RoHS-compliant MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Rating at 25oC ambient temperature unless otherwise specified. Parameter Maximum repetitive peak reverse voltage Maximum RMS voltage Maximum DC blocking voltage Maximum average forward rectified output current at TC=50oC TA=40oC Symbols VRRM VRMS VDC IF(AV) IFSM I2t VF IR CJ RθJA RθJL TJ, TSTG 95 22 (2) 3.5 (1) -55 to +150 GBL005 50 35 50 GBL01 100 70 100 GBL02 200 140 200 GBL04 400 280 400 4.0 (1) 3.0 (2) 150.0 93 1.0 10.0 500 40 o GBL06 600 420 600 GBL08 800 560 800 GBL10 1000 700 1000 Units Volts Volts Volts Amps Amps A 2 se c Volts uA pF C/W o Peak forward surge current, 8.3ms single half sine-wave superimposed on rated load (JEDEC Method) Rating for fusing (t < 8.3ms) Maximum instantaneous forward voltage drop per leg at 2.0A Maximum DC reverse current at rated DC blocking voltage per leg TA=25oC TA=150oC Typical junction capacitance per leg at 4.0V, 1MHz Typical thermal resistance per leg Operating junction and storage temperature range C Notes: 1. Unit mounted on 3.0 x 3.0 x 0.11" thick (7.5 x 7.5 x 0.3 cm) Al. plate 2. Unit mounted on P.C.B. at 0.375" (9.5 mm) lead length and 0.5 x 0.5" (13 x13 mm) copper pads 02/08/2007 Rev.1.00 www.SiliconStandard.com 1 GBL02 RATINGS AND CHARACTERISTIC CURVES ( TA = 25 C unless otherwise noted ) o Information furnished by Silicon Standard Corporation is believed to be accurate and reliable. However, Silicon Standard Corporation makes no guarantee or warranty, expressed or implied, as to the reliability, accuracy, timeliness or completeness of such information and assumes no responsibility for its use, or for infringement of any patent or other intellectual property rights of third parties that may result from its use. Silicon Standard reserves the right to make changes as it deems necessary to any products described herein for any reason, including without limitation enhancement in reliability, functionality or design. No license is granted, whether expressly or by implication, in relation to the use of any products described herein or to the use of any information provided herein, under any patent or other intellectual property rights of Silicon Standard Corporation or any third parties. 02/08/2007 Rev.1.00 www.SiliconStandard.com 2