HER1001

HER1001 - HER1007 1A Axial High Efficiency Rectifier PRODUCT SUMMARY Voltage range 50 to 1000 Volts Popular DO204AL/DO-41 axial package DO-204AL/DO-41 FEATURES Plastic package has Underwriters Laboratories Flammability Classification 94V-0 High current capability Diffused junction Ultra fast switching for high efficiency High temperature soldering guaranteed: 350°C for 10 seconds with 0.375" (9.5mm) lead length and 5 lbs. (2.3kg) tension Maximum Tj is 150°C and maximum TSTG is 175°C with PI glue MECHANICAL DATA Case: JEDEC DO-204AL (DO-41), molded plastic body Terminals: Matte-Sn plated axial leads, solderable per MIL-STD-750, Method 2026 Polarity: Color band denotes cathode end Mounting position: any Weight: 0.012 ounce, 0.r Dimensions in inches and (millimeters) Pb-free, RoHS compliant. MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Rating at 25°C ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20% H ER 1001 50 35 50 H ER 1002 100 70 100 H ER 1003 200 140 200 H ER 1004 400 280 400 1.0 H ER 1005 600 420 600 H ER 1006 800 560 800 H ER 1007 1000 700 1000 Parameter Maximum repetitive peak reverse voltage Maximum RMS voltage Maximum DC blocking voltage Maximum average forward rectified current @TA=55oC Symbols VRRM VRMS V DC IF(AV) IFSM VF @ TJ=25oC @ TJ=100oC IR trr CJ RθJA TJ TSTG Units Volts Volts Volts Amp Peak forward surge current 8.3ms single half sine-wave superimposed on rated load (JEDEC Method) Maximum forward voltage at 1.0A DC Maximum DC reverse current at rated DC blocking voltage 30.0 1.0 1.3 5.0 100 50 20 25 -55 to +125 -55 to +150 100 10 1.7 Amps Volts uA uA nS pF o Maximum reverse recovery time (Note 1) Typical junction capacitance (Note 2) Typical thermal resistance (Note 3) Operating junction temperature range Storage temperature range C/W o C C o Notes: 1. Measured with IF=0.5A,IR=1A,IRR=0.25A. 2. Measured at 1.0MHz and applied reverse voltage of 4.0V DC. 3. Thermal Resistance Junction to Ambient. 10/12/2006 Rev.4.01 www.SiliconStandard.com 1 of 2 HER1001 - HER1007 RATINGS AND CHARACTERISTIC CURVES (TA = 25°C unless otherwise noted) o Information furnished by Silicon Standard Corporation is believed to be accurate and reliable. However, Silicon Standard Corporation makes no guarantee or warranty, expressed or implied, as to the reliability, accuracy, timeliness or completeness of such information and assumes no responsibility for its use, or for infringement of any patent or other intellectual property rights of third parties that may result from its use. Silicon Standard reserves the right to make changes as it deems necessary to any products described herein for any reason, including without limitation enhancement in reliability, functionality or design. No license is granted, whether expressly or by implication, in relation to the use of any products described herein or to the use of any information provided herein, under any patent or other intellectual property rights of Silicon Standard Corporation or any third parties. 10/12/2006 Rev.4.01 www.SiliconStandard.com 2 of 2