MBR2090CT

MBR20100CT, MBRF20100CT & MBRB20100CT Series Dual High-Voltage Schottky Barrier Rectifiers PRODUCT SUMMARY Reverse Voltage 90 to 100 Volts Forward Current 20.0 Amperes FEATURES Plastic package has Underwriters Laboratory Flammability Classification 94V-0 Dual rectifier construction, positive center tap Metal silicon junction, majority carrier conduction Low power loss, high efficiency Guardring for overvoltage protection For use in low voltage, high frequency inverters, free wheeling, and polarity protection applications High temperature soldering guaranteed: 250oC/10 seconds, 0.25" (6.35mm) from case MECHANICAL DATA Case: JEDEC TO-220AB, ITO-220AB & TO-263AB molded plastic body Terminals: Plated leads, solderable per MIL-STD-750, Method 2026 Polarity: As marked Mounting Position: Any Mounting Torque: 10 in-lbs maximum Weight: 0.08 ounce, 2.24 grams ITO-220AB Pb-free; RoHS-compliant TO-220AB Mounting Pad Layout TO-263AB TO-263AB(D2PAK) Dimensions in inches and (millimeters) 02/08/2007 Rev.1.00 www.SiliconStandard.com 1 MBR20100CT, MBRF20100CT & MBRB20100CT Series MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS ( TC = 25 C unless otherwise noted ) ( TC = 25oC unless otherwise noted ) o Parameter Maximum repetitive peak reverse voltage Working peak reverse voltage Maximum DC blocking voltage Maximum average forward rectified current at TC=133oC Total device Per leg Symbol VRRM VRWM VDC IF(AV) IFSM IRRM dv/dt MBR2090CT 90 90 90 20 10 150 0.5 10,000 MBR20100CT 100 100 100 Unit Volts Volts Volts Amps Amps Amp V/us Peak forward surge current 8.3ms single half sine-wave superimposed on rated load (JEDEC Method) per leg Peak repetitive reverse current per leg at tp = 2.0us, 1KHz Voltage rate of change (rated VR) Maximum instantaneous forward voltage per leg (Note 4) at IF=10A, TC=25oC at IF=10A, TC=125oC at IF=20A, TC=25oC at IF=20A, TC=125oC Maximum reverse current per leg at working peak reverse voltage (Note 4) TJ=25oC TJ=100 C o 0.80 VF 0.65 0.95 0.75 100 IR 6.0 RθJA RθJC VISOL TJ TSTG MBR 60 / MBRF - / MBRB 60 MBR 2 / MBRF 3.5 / MBRB 2 4500 (Note 1) 3500 (Note 2) 1500 (Note 3) -55 to +150 -55 to +150 o Volts uA mA C/W Typical thermal resistance per leg RMS Isolation voltage (MBRF type only) from terminals to heatsink with t = 1.0 second, RH < 30% Operating junction temperature range Storage temperature range Volts o C C o 02/08/2007 Rev.1.00 www.SiliconStandard.com 2 MBR20100CT, MBRF20100CT & MBRB20100CT Series RATINGS AND CHARACTERISTIC CURVES ( TA = 25 C unless otherwise noted ) o Information furnished by Silicon Standard Corporation is believed to be accurate and reliable. However, Silicon Standard Corporation makes no guarantee or warranty, expressed or implied, as to the reliability, accuracy, timeliness or completeness of such information and assumes no responsibility for its use, or for infringement of any patent or other intellectual property rights of third parties that may result from its use. Silicon Standard reserves the right to make changes as it deems necessary to any products described herein for any reason, including without limitation enhancement in reliability, functionality or design. No license is granted, whether expressly or by implication, in relation to the use of any products described herein or to the use of any information provided herein, under any patent or other intellectual property rights of Silicon Standard Corporation or any third parties. 02/08/2007 Rev.1.00 www.SiliconStandard.com 3