SK12

SK12 THRU SK16 SCHOTTKY BARRIER RECIFITERS PRODUCT SUMMARY Surface Mount Low Reverse Voltage 20 to 60 volts Forward Current 1.0 Ampere FEATURES For surface mounted application Metal-Semiconductor junction with guardring Epitaxial construction Very low forward voltage drop High current capability Plastic material has UL flammability classification 94V-0 wheeling, and polarity protection applications MECHANCIAL DATA Cases: JEDEC DO-214AC(SMA) molded plastic Polarity : Indicated by cathode band Weight : 0.002 ounce, 0.064 gram Pb-free; RoHS-compliant MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Rating at 25 oC ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20% Parameter Maximum repetitive peak reverse voltage Maximum RMS voltage Maximum DC blocking voltage Maximum average forward rectified current @TL=100 C Peak forward surge current 8.3ms single half sine-wave superimposed on rated load (JEDEC Method) Maximum forward voltage at 1.0A DC Maximum DC reverse current at rated DC blocking voltage @TJ=25oC @TJ=100oC o Symbols VRRM VRMS V DC I(AV) IFSM VF IR CJ RθJL TJ TSTG S K 12 20 14 20 S K 13 30 21 30 S K 14 40 28 40 1.0 30.0 S K 15 50 35 50 S K 16 60 42 60 Units Volts Volts Volts Amp Amps 0.50 0.5 10.0 110 20 -55 to +125 -55 to +150 0.70 Volts mA pF o Typical junction capacitance (Note 1) Typical thermal resistance (Note 2) Operating junction temperature range Storage temperature range Notes: C/W o C C o 1. Measured at 1.0MHz and applied reverse voltage of 4.0V DC. 2. Thermal Resistance Junction to Lead. 06/01/2007 Rev.1.00 www.SiliconStandard.com 1 SK12 THRU SK16 RATINGS AND CHARACTERISTIC CURVES Information furnished by Silicon Standard Corporation is believed to be accurate and reliable. However, Silicon Standard Corporation makes no guarantee or warranty, expressed or implied, as to the reliability, accuracy, timeliness or completeness of such information and assumes no responsibility for its use, or for infringement of any patent or other intellectual property rights of third parties that may result from its use. Silicon Standard reserves the right to make changes as it deems necessary to any products described herein for any reason, including without limitation enhancement in reliability, functionality or design. No license is granted, whether expressly or by implication, in relation to the use of any products described herein or to the use of any information provided herein, under any patent or other intellectual property rights of Silicon Standard Corporation or any third parties. 06/01/2007 Rev.1.00 www.SiliconStandard.com 2