SL14

SL12 THRU SL14 SCHOTTKY BARRIER RECIFITERS PRODUCT SUMMARY Surface Mount Low VF Reverse Voltage 20 to 40 volts Forward Current 1.0 Ampere FEATURES For surface mounted application Metal silicon junction, majority carrier conduction Low forward voltage drop Easy pick and place High surge current capability Plastic material used carries Underwriters Laboratory Classification 94V-O Epitaxial construction High temperature soldering: 250oC / 10 seconds at terminals MECHANCIAL DATA Cases: Molded plastic Terminals: Solder plated Polarity: Indicated by cathode band Weight: 0.002 ounce, 0.064 gram Pb-free; RoHS-compliant MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Rating at 25 oC ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20% Parameter Maximum repetitive peak reverse voltage Maximum RMS voltage Maximum DC blocking voltage Maximum average forward rectified current See Fig. 1 Peak forward surge current, 8.3 ms single half sine-wave superimposed on rated load (JEDEC Method ) Maximum instantaneous forward voltage @ 1.0A (Note 1) Maximum DC reverse current at rated DC blocking voltage @ TA=25oC @ TA=100oC Symbols VRRM VRMS VDC I(AV) IFSM VF IR RθJL RθJA TJ TSTG 0.385 S L 12 20 14 20 S L 13 30 21 30 1.0 30.0 0.385 2.0 100 28 88 -55 to +125 -55 to +150 o S L 14 40 28 40 Units Volts Volts Volts Amp Amps 0.400 Volts mA C/W o Maximum thermal resistance (Note 2) Operating junction temperature range Storage temperature range Notes: C C o 1. Pulse Test with PW=300usec, 1% Duty Cycle. 2. Measured on P.C. Board with 0.2 x 0.2" (5.0 x 5.0 mm) Copper Pad Areas. 05/10/2007 Rev.1.00 www.SiliconStandard.com 1 SL12 THRU SL14 RATINGS AND CHARACTERISTIC CURVES Information furnished by Silicon Standard Corporation is believed to be accurate and reliable. However, Silicon Standard Corporation makes no guarantee or warranty, expressed or implied, as to the reliability, accuracy, timeliness or completeness of such information and assumes no responsibility for its use, or for infringement of any patent or other intellectual property rights of third parties that may result from its use. Silicon Standard reserves the right to make changes as it deems necessary to any products described herein for any reason, including without limitation enhancement in reliability, functionality or design. No license is granted, whether expressly or by implication, in relation to the use of any products described herein or to the use of any information provided herein, under any patent or other intellectual property rights of Silicon Standard Corporation or any third parties. 05/10/2007 Rev.1.00 www.SiliconStandard.com 2