SS6735-35GYTR

SS6735G 500mA Low Dropout Linear Regulator FEATURES Low dropout voltage of 650mV at an output current of 500mA (3.0V output version). Guaranteed 500mA output current. Low ground current of 65µA. Output voltage accuracy of 2% at 1.8V/ 2.0V /2.5V /2.7V/ 3.0V/ 3.3V/ 3.5V/ 3.7V/ 3.8V/ 5.0V/5.2V Only needs 4.7µF output capacitor for stability. Current and thermal limiting. DESCRIPTION The SS6735G is a 3-pin low-dropout linear regulator with superior characteristics, which include zero base current loss, very low dropout voltage, and output voltage accuracy of 2%. Typical ground current remains approximately 65µA, for loads ranging from zero to maximum. Dropout voltage at an output current of 100mA is exceptionally low. Built-in output current limiting and thermal limiting provide maximum protection against fault conditions. Pb-free, RoHS compliant. APPLICATIONS CD-ROM Drivers. LAN Cards. Microprocessors. DRAM Modules. Wireless Communication Systems. Battery Powered Systems. The SS6735G is available in RoHS-compliant SOT-23-3, SOT-223, SOT-89, and TO-252 packages. TYPICAL APPLICATION CIRCUIT VIN VIN VOUT SS6735G VOUT + 1µF CIN GND + 4.7µF COUT Low Dropout Linear Regulator (CIN and COUT should be electrolytic capacitors) 1/15/2005 Rev.2.10 www.SiliconStandard.com 1 of 9 SS6735G ORDERING INFORMATION SS6735-XX G X XX Packing: TR: Tape and reel SOT-23-3 (GU) 1: GND 2: VOUT 3: VIN 1 2 3 PIN CONFIGURATION Package type: E: TO-252 U: SOT-23-3 X: SOT-89-3 Y: SOT-223 G: Pb-free, RoHS compliant. SOT-89 (GX) TOP VIEW 1: GND 2. VIN 3. VOUT 1 2 3 Output voltage: 18: 1.8V 20: 2.0V 25: 2.5V 27: 2.7V 30: 3.0V 33: 3.3V 35: 3.5V 37: 3.7V 38: 3.8V 50: 5.0V 52: 5.2V Example: SS6735-18GXTR 1.8V version, in RoHS-compliant SOT-89 package, shipped on tape and reel. TO-252 (GE) TOP VIEW 1: VOUT 2. GND 3. VIN SOT-223 (GY) TOP VIEW 1: VOUT 2. GND 3. VIN 1 1 2 3 2 3 SOT-23 MARKING Part No. SS6735-18GU SS6735-20GU SS6735-25GU SS6735-27GU GU CE18P CE20P CE25P CE27P Part No. SS6735-35GU SS6735-37GU SS6735-38GU SS6735-50GU GU CE35P CE37P CE38P CE50P SS6735-30GU SS6735-33GU CE30P CE33P SS6735-52GU CE52P 1/15/2005 Rev.2.10 www.SiliconStandard.com 2 of 9 SS6735G SOT-89 MARKING Part No. SS6735-18GX SS6735-20GX SS6735-25GX SS6735-27GX SS6735-30GX SS6735-33GX SS6735-35GX SS6735-37GX SS6735-38GX SS6735-50GX SS6735-52GX GX CF18P CF20P CF25P CF27P CF30P CF33P CF35P CF37P CF38P CF50P CF52P SOT-223 MARKING Part No. SS6735-18GY SS6735-20GY SS6735-25GY SS6735-27GY SS6735-30GY SS6735-33GY SS6735-35GY SS6735-37GY SS6735-38GY SS6735-50GY SS6735-52GY GY CC18P CC20P CC25P CC27P CC30P CC33P CC35P CC37P CC38P CC50P CC52P ABSOLUTE MAXIMUM RATINGS Input Supply Voltage Operating Temperature Range Storage Temperature Range Maximum Junction Temperature Lead Temperature (Soldering) 10 sec. -0.3 ~12V -40°C~ 85°C -65°C~150°C 125°C 260°C Thermal Resistance Junction to Ambient (Assumes no ambient airflow, no heatsink) SOT-89 Package TO-252 Package SOT-23 Package SOT-223 Package 160°C/W 100°C/W 180°C/W 155°C/W Absolute Maximum Ratings are those values beyond which the life of a device may be impaired. TEST CIRCUIT Refer to the TYPICAL APPLICATION CIRCUIT 1/15/2005 Rev.2.10 www.SiliconStandard.com 3 of 9 SS6735G ELECTRICAL CHARACTERISTICS PARAMETER (T =25°C, CIN=1µF, COUT=4.7µF, unless otherwise A specified.) (Note1 ) MIN. 5.100 4.900 3.725 3.625 3.430 3.235 2.940 2.646 2.450 1.960 1.764 TYP. 5.200 5.000 3.800 3.700 3.500 3.300 3.000 2.700 2.500 2.000 1.800 50 MAX. 5.300 5.100 3.875 3.775 3.570 3.365 3.060 2.754 2.550 2.040 1.836 UNIT TEST CONDITIONS No Load SS6735-52 SS6735-50 SS6735-38 SS6735-37 SS6735-35 SS6735-33 SS6735-30 SS6735-27 SS6735-25 SS6735-20 SS6735-18 (Note 2) IL=1mA, 1.4V≤VOUT≤3.2V 3.3V≤VOUT≤5.2V IL=0.1~500mA 1.4V≤VOUT≤3.9V 4.0V≤VOUT≤5.2V VIN=7V, VOUT=0V 4.0V≤VOUT≤5.2V 3.0V≤VOUT≤3.9V 2.5V≤VOUT≤2.9V 2.0V≤VOUT≤2.4V 1.4V≤VOUT≤1.9V VIN=5~12V VIN=7~12V VIN=5.5~12V VIN=5.5~12V VIN=4.1~12V VIN=4.0~12V VIN=4.0~12V VIN=4.0~12V VIN=4.0~12V VIN=4.0~12V VIN=4.0~12V VIN=4.0~12V VIN=4.0~12V Output Voltage V Output Voltage Temperature Coefficient Line Regulation PPM/°C VIN=4V~12V VIN=5.5V~12V VIN=5V VIN=7V 500 3 3 10 20 10 10 30 50 mV Load Regulation (Note 3) Current Limit (Note 4) mV mA 510 650 780 1100 1400 65 65 90 90 Dropout Voltage (Note 5) IL=500mA mV Ground Current IO=0.1mA~IMAX 1.4V≤VOUT≤3.9V 4.0V≤VOUT≤5.2V µA Note 1: Note 2: Note 3: Note 4: Note 5: Specifications are guaranteed by Statistical Quality Control (SQC), not by 100% production testing, over the operating temperature range from -40°C to 85°C. Guaranteed by design. Regulation is measured at constant junction temperature, using pulse testing with a low ON time. Current limit is measured by pulsing a short time. Dropout voltage is defined as the input to output differential at which the output voltage drops 100mV below the value of the output voltage measured with a 1V differential. 1/15/2005 Rev.2.10 www.SiliconStandard.com 4 of 9 SS6735G TYPICAL PERFORMANCE CHARACTERISTICS 500 600 SS6735-52 400 500 SS6735-33 T=25°C VDROP (mV) 300 VDROP (mV) 150 200 250 300 350 400 450 500 T=25°C 400 300 200 200 100 100 0 50 100 0 0 ILOAD (mA) 0 50 100 Fig. 1 480 460 440 VDROP vs. ILOAD 640 ILOAD (mA) Fig. 2 VDROP vs. ILOAD 150 200 250 300 350 400 450 500 SS6735-52 ILOAD=500mA VDROP (mV) 620 600 580 560 540 520 500 480 SS6735-33 ILOAD=500mA VDROP (mV) 420 400 380 360 340 320 -40 -30 -20 -10 0 10 20 30 40 50 60 70 80 460 -40 -20 0 20 40 60 80 Temperature (°C) Fig. 3 46.0 VDROP vs. Temperature 46.0 Fig. 4 Temperature (°C) VDROP vs. Temperature SS6735-52 Ground Current (µA) 45.5 45.5 45.0 44.5 44.0 43.5 43.0 0 SS6735-33 T=25°C Ground Current (µA) T=25°C 45.0 44.5 44.0 43.5 43.0 0 50 100 150 200 250 300 350 400 450 500 50 100 150 200 250 300 350 400 450 500 ILOAD (mA) ILOAD (mA) Fig. 5 Ground Current vs. ILOAD Fig. 6 Ground Current vs. ILOAD 1/15/2005 Rev.2.10 www.SiliconStandard.com 5 of 9 SS6735G TYPICAL PERFORMANCE CHARACTERISTICS (Continued) 46 45 44 43 42 41 40 -40 46.0 SS6735-52 Ground Current (µA) ILOAD = 500mA SS6735-33 45.5 45.0 44.5 44.0 43.5 43.0 -40 Ground Current (µA) ILOAD = 500mA -20 0 20 40 60 80 -20 0 20 40 60 80 Temperature (°C) Temperature (°C) Fig. 7 700 690 680 670 660 650 640 630 620 610 600 590 580 -40 Ground Current vs. Temperature Fig. 8 Ground Current vs. Temperature SS6735 VIN= 7V VIN= 6V VIN= 5V Current Limit (mA) -20 0 Temperature (°C) 20 40 60 80 Fig. 9 Current Limit vs. Temperature 1/15/2005 Rev.2.10 www.SiliconStandard.com 6 of 9 SS6735G BLOCK DIAGRAM VIN VOUT CURRENT LIMITING ERROR AMP THERMAL SHUTDOWN - + 1.235V Reference + - GND PIN DESCRIPTIONS VOUT PIN - Output pin. GND PIN - Power GND. VIN PIN - Power Supply Input. 1/15/2005 Rev.2.10 www.SiliconStandard.com 7 of 9 SS6735G PHYSICAL DIMENSIONS SOT-23 D e S Y M B O L (unit: mm) All package options are Pb-free, RoHS compliant. SOT-23 MILLIMETERS MIN. 0.95 0.05 0.90 0.30 0.08 2.80 2.60 1.50 0.95 BSC 1.90 BSC 0.30 0.60 REF 0° 8° 0.60 MAX. 1.45 0.15 1.30 0.50 0.22 3.00 3.00 1.70 A E1 A1 A2 b c A A E e1 SEE VIEW B D E b A2 WITH PLATING E1 e A c e1 L L1 BASE METAL SECTION A-A A1 θ 0.25 GAUGE PLANE SEATING PLANE L TO-252 E b3 L1 VIEW B θ A c2 L3 S Y M B O L TO-252-3L MILLIMETERS MIN. 2.19 0.00 0.64 4.95 0.46 0.46 5.33 6.35 2.28 BSC 9.40 1.40 2.67 REF 0.51 BSC 0.89 -0° 2.03 1.02 8° 10.41 1.78 MAX. 2.38 0.13 0.89 5.46 0.61 0.89 6.22 6.73 A A1 D b b3 H L4 c c2 A A SEE VIEW B D E e e b WITH PLATING H c L L1 BASE METAL SECTION A-A L2 L3 L4 θ GAUGE PLANE SEATING PLANE θ L VIEW B 1/15/2005 Rev.2.10 www.SiliconStandard.com A1 L2 L1 8 of 9 SS6735G SOT-223 D b2 S Y M B O L SOT-223 MILLIMETERS MIN. MAX. 1.80 0.02 1.55 0.66 2.90 0.23 6.30 6.70 3.30 2.30 BSC 4.60 BSC 0.90 0° 8° 0.10 1.65 0.84 3.10 0.33 6.70 7.30 3.70 A1 A1 E1 A2 b b2 c E A A e e1 SEE VIEW B D E b A2 WITH PLATING E1 e A c e1 L BASE METAL SECTION A-A θ L VIEW B GAUGE PLANE SEATING PLANE SOT-89 D D1 0.25 θ A C S Y M B O L SOT-89 MILLIMETERS MIN. 1.40 0.44 0.36 0.35 4.40 1.50 2.29 1.50 BSC 3.00 BSC 3.94 0.89 4.25 1.20 MAX. 1.60 0.56 0.48 0.44 4.60 1.83 2.60 A H B B1 C L E D D1 e e1 E e e1 H L B1 B Information furnished by Silicon Standard Corporation is believed to be accurate and reliable. However, Silicon Standard Corporation makes no guarantee or warranty, express or implied, as to the reliability, accuracy, timeliness or completeness of such information and assumes no responsibility for its use, or for infringement of any patent or other intellectual property rights of third parties that may result from its use. Silicon Standard reserves the right to make changes as it deems necessary to any products described herein for any reason, including without limitation enhancement in reliability, functionality or design. No license is granted, whether expressly or by implication, in relation to the use of any products described herein or to the use of any information provided herein, under any patent or other intellectual property rights of Silicon Standard Corporation or any third parties. 1/15/2005 Rev.2.10 www.SiliconStandard.com 9 of 9