W06GM

RB154 Glass Passivated Single-Phase Bridge Rectifiers PRODUCT SUMMARY Reverse Voltage 50 to 1000 Volts Forward current 1.5 Amperes FEATURES Surge overload ratings to 40 or 50 amperes peak Ideal for printed circuit board Reliable low cost construction technique results in inexpensive product High temperature soldering guaranteed: 260oC / 10 seconds / 0.375" (9.5mm) lead length at 5 lbs. (2.3 kg) tension Package outline dimensions in inches (millimeters) MECHANICAL DATA Cases: Molded plastic Terminals: solder plated Polarity: As marked Weight: 1.07 grams (RB-15), 1.10 grams (WOB) Pb-free; RoHS-compliant 07/04/2007 Rev.1.00 www.SiliconStandard.com 1 RB154 MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25 C ambient temperature unless otherwise specified. Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20% R B 151 W005 Parameter Symbols W005M W005G W005GM o R B 152 W01 W01M W01G W01GM R B 153 W02 W02M W02G W02GM R B 154 W04 W04M W04G W04GM R B 155 W06 W06M W06G W06GM R B 156 W08 W08M W08G W08GM R B 157 W10 W10M W10G W10GM Units Maximum recurrent peak reverse voltage Maximum RMS voltage Maximum DC blocking voltage Maximum average forward rectified current at TA=50oC Peak forward surge current, 8.3ms single half sine-wave superimposed on rated load (JEDEC Method) Max. instantaneous forward voltage drop per element at 0.75A Maximum DC reverse current at rated DC blocking voltage per element Typical thermal resistance per leg (Note 1) Operating junction temperature range Storage temperature range TA=25oC VRRM VRMS V DC IF(AV) IFSM VF IR RθJA RθJL TJ TSTG 50 35 50 100 70 100 200 140 200 400 280 400 1.5 600 420 600 800 560 800 1000 700 1000 Volts Volts Volts Amps Amps Volt uA o Wxxx or WxxxM 40.0, RB15x, WxxxG & WxxxGM 50.00 1.0 10.0 500 (RB15x, Wxxx, WxxxM @TA=100oC, WxxxG or WxxxGM @TA=125oC) 36 13 Wxxx or WxxxM -55 to +125, RB15x, WxxxG & WxxxGM -55 to +150 -55 to +150 C/W o C C o Notes: 1. Thermal resistance from junction to ambient and from junction to lead mounted on P.C.B. with 0.2 x 0.2" (5 x 5mm) copper pads 07/04/2007 Rev.1.00 www.SiliconStandard.com 2 RB154 RATINGS AND CHARACTERISTIC CURVES (TA = 25oC unless otherwise noted) - W005 thru W10 (TA = 25oC unless otherwise noted) - W005M thru W10M (TA = 25oC unless otherwise noted) - RB151 thru RB157, W005G thru W10G (TA = 25oC unless otherwise noted) - W005GM thru W10GM Information furnished by Silicon Standard Corporation is believed to be accurate and reliable. However, Silicon Standard Corporation makes no guarantee or warranty, expressed or implied, as to the reliability, accuracy, timeliness or completeness of such information and assumes no responsibility for its use, or for infringement of any patent or other intellectual property rights of third parties that may result from its use. Silicon Standard reserves the right to make changes as it deems necessary to any products described herein for any reason, including without limitation enhancement in reliability, functionality or design. No license is granted, whether expressly or by implication, in relation to the use of any products described herein or to the use of any information provided herein, under any patent or other intellectual property rights of Silicon Standard Corporation or any third parties. 07/04/2007 Rev.1.00 www.SiliconStandard.com 3