SDA113CLUB

Solid State Devices, Inc. 14830 Valley View Blvd * La Mirada, Ca 90638 Phone: (562) 404-7855 * Fax: (562) 404-1773 ssdi@ssdi-power.com * www.ssdi-power.com SDA113 Series DESIGNER’S DATA SHEET Part Number / Ordering Information 1/ SDA113 __ __ __ │ │ └ Lead Bend 3/ __ = Straight Leads ││ UB = Up Bend ││ DB = Down Bend ││ │ └ Terminals 2/ 3/ L = Copper Leads │ _ = Turret Terminals │ └ Voltage A = 50 V B = 100 V C = 200 V D = 400 V E = 600 V F = 800 V G = 1000 V 7.5 A / 1000V THREE PHASE BRIDGE RECTIFIER ASSEMBLY Features: • • • • • • • Higher Blocking Voltage Available. Contact Factory. High Output Current 7.5 Amps Low Reverse Leakage Current Constructed with Void-free, Hermetically Sealed Discretes Aluminum Case for Maximum Thermal Conductivity Small Package Size (1.500 x 0.875 x 0.310”) TX and TXV & S Level Screening Available • Fast, Ultra Fast, & Hyper Fast Versions Available. Contact Factory. Maximum Ratings Symbol Value Units Peak Repetitive and Peak Surge Reverse Voltage VRRM VRSM VR Io IFSM Top & Tstg RθJC SDA113 See Voltage Key 7.5 5.5 50 -55 to +150 4.5 Volts Amps Amps ºC ºC/W Average Rectified Forward Current 4/ (Resistive Load, 60 Hz Sine Wave) Peak Surge Current (8.3 ms Pulse, Half Sine Wave, TA = 25 °C, per leg) Operating & Storage Temperature Maximum Thermal Resistance, Junction to Case SDA113 ( L ) TC = 55 ° C TC = 100°C Lead Dia = .050” Lead Length = 0.5” min NOTE: All specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. DATA SHEET #: RA0047A DOC Solid State Devices, Inc. 14830 Valley View Blvd * La Mirada, Ca 90638 Phone: (562) 404-7855 * Fax: (562) 404-1773 ssdi@ssdi-power.com * www.ssdi-power.com SDA113 Series Electrical Characteristic 5/ Instantaneous Forward Voltage Drop (TA = 25°C, 300 - 500 µsec pulse) Reverse Leakage Current (Rated VR, TA = 25ºC, 300 µsec pulse minimum) Reverse Leakage Current (Rated VR, TA = 100ºC, 300 µsec pulse minimum) NOTES: * 1/ 2/ 3/ 4/ 5/ Pulse Test: Pulse Width = 300µsec, Duty Cycle = 2% For Ordering Information, Price, and Availability Contact Factory. For Package Outlines Contact Factory. Up and Down Bend Configurations are Available for ‘__’ ( Leaded ) Packages Only. Derate Linearly at 0.28A/ºC for TC > 55ºC. Unless Otherwise Specified, All Electrical Characteristics @25ºC. Symbol IF = 3A Min –– –– –– Typ –– –– –– Max 1.1 5 50 Units Volts µA µA VF1 IR1 IR2 Mounting Diagram: 2/ Thickness = 0.340” max