SDA160F

SDA160A thru SDA160F Solid State Devices, Inc. 14701 Firestone Blvd * La Mirada, Ca 90638 Phone: (562) 404-4474 * Fax: (562) 404-1773 ssdi@ssdi-power.com * www.ssdi-power.com Designer’s Data Sheet Part Number/Ordering Information 1/ SDA160 __ __ __ │ │ └ Screening 2/ ││ __ = Not Screened ││ TX = TX Level ││ TXV = TXV ││ S = S Level ││ _ = Spade Terminals │ └ Terminals T = Turret Terminals │ │ └ Peak Inverse Voltage (per leg) A = 50V, B = 100V, C = 150V, D = 200V, E = 250V, F = 300V, 40 AMPS 50 ─ 300 VOLTS HYPER FAST RECOVERY THREE PHASE BRIDGE RECTIFIER • • • • • • • • • • • Hyper Fast Reverse Recovery Time 40 ns Max 4/ Average Output Current 40 Amps @ 55°C PIV 50 to 300 Volts Per Leg Available with Turret or Spade Terminals High Surge Rating- 250A Thermally Superior Encapsulant Hermetically Sealed Diode Cells Replacement for Unitrode 800 Series Aluminum Case, Electrically Insulated Available in Higher Voltages Available in Hyper Fast Recovery Times FEATURES: MAXIMUM RATINGS 3/ RATING Peak Repetitive Reverse Voltage 5/ (per leg) And DC Blocking Voltage (per leg) SDA160A SDA160B SDA160C SDA160D SDA160E SDA160F SYMBOL VRM (REP) VR VALUE 50 100 150 200 250 300 40 150 250 -65 to +150 1.5 UNIT Volts Half Wave Rectified Forward Current, Averaged Over Full Cycle (Resistive Load, 60 Hz, Sine Wave, TC = 55°C) IO IFM (REP) IFM (SURGE) TOP and TSTG RθJC Amps Amps Amps °C °C/W Peak Repetitive Forward Current (per leg) (TC = 55°C, 8.3 msec Pulse, Allow Junction to Reach Equilibrium Between Pulses) Peak Surge Current (per assembly) (TC = 55°C, Superimposed on Rated Current at Rated Voltage, 8.3 msec Pulse) Operating & Storage Temperature Thermal Resistance, Junction to Case SDA160 Packages: NOTES: 1/ For Ordering Information, Price, and AvailabilityContact Factory. 2/ Screened to MIL-PRF-19500. 3/ Unless Otherwise Specified, All Electrical Characteristics @25ºC. 4/ Recovery Conditions: IF = 0.5 Amp, IR = 1.0 Amp rec. to .25 Amp. 5/ For RMS Reverse Voltage, multiply VR values by .707 NOTE: All specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. Turret Terminals: Spade Terminals: DATA SHEET #: RA0089A DOC SDA160A thru SD160F Solid State Devices, Inc. 14701 Firestone Blvd * La Mirada, Ca 90638 Phone: (562) 404-4474 * Fax: (562) 404-1773 ssdi@ssdi-power.com * www.ssdi-power.com ELECTRICAL CHARACTERISTICS (per leg) 3/ CHARACTERISTICS Maximum Instantaneous Forward Voltage Drop (IF = 10A, 60Hz, 300 µs Pulse, TC = 25°C) Maximum Reverse Leakage Current (Rated VR, TC = 25°C) Maximum Reverse Leakage Current (Rated VR, TC = 100°C) Maximum Reverse Recovery Time (IF = 500mA, IR = 1A, IRR = 250mA) 6/ SYMBOL VALUE VF IR1 IR2 trr 1.2 20 2 40 UNIT Volts µA mA ns Spade Terminal Package Outline: Turret Terminal Package Outline: TOLERANCE: .XX = ± .03 .XXX = ± .020 NOTES: 1/ For Ordering Information, Price, and Availability- Contact Factory. 2/ Screened to MIL-PRF-19500. 3/ Unless Otherwise Specified, All Electrical Characteristics @25ºC. 4/ Recovery Conditions: IF = 0.5 Amp, IR = 1.0 Amp rec. to .25 Amp. 5/ For RMS Reverse Voltage, multiply VR values by .707 6/ For information on operating curves, contact Factory. NOTE: All specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. DATA SHEET #: RA0089A DOC