SDA168M

SDA168H thru SDA168N Solid State Devices, Inc. 14701 Firestone Blvd * La Mirada, Ca 90638 Phone: (562) 404-4474 * Fax: (562) 404-1773 ssdi@ssdi-power.com * www.ssdi-power.com HIGH RELIABILITY 5.0 AMP, 1000 – 5000 VOLTS STANDARD RECOVERY THREE PHASE BRIDGE RECTIFIER FEATURES: Average Output Current 5.0 Amps @ 55OC PIV 1000 to 5000 Volts Per Leg Hermetically Sealed Diode Cells Avalanche Rated Encapsulated Epoxy Case Insulated Electrical Connections Small Size Mounting Holes for Ease of Installation Available in Fast, Ultra Fast, and Hyper Fast Recovery Times TX, TXV, or S-Level Screening Available Designer’s Data Sheet Part Number/Ordering Information 1/ SDA168 __ __ │ └ Screening 2/ │ __ = Not Screened │ TX = TX Level │ TXV = TXV │ S = S Level │ │ Peak Inverse Voltage └ H = 1,000 V, I = 1,500 V, J = 2,000 V, K = 2,500 V, L = 3,000 V, M = 4,000 V, N = 5,000 V • • • • • • • • • • ELECTRICAL CHARACTERISTICS 3/ Part Number Peak Inverse Voltage (per leg) Sine Wave Reverse4/ RMS Recovery Input Time Voltage Max. Average DC Output Current TC=Case Temp Average DC Output Current TA= Ambient Temp (no heat sink) Peak Forward Surge Current (1 Cycle) Peak Repetitive Forward Current Maximum Forward Voltage (per leg) @ 3 ADC Maximum Reverse Current (per leg) @ PIV Symbol Units Conditions SDA168H SDA168I SDA168J SDA168K SDA168L SDA168M5/ SDA168N5/ PIV Volts 1000 1500 2000 2500 3000 4000 5000 Vr Volts 707 1060 1414 1767 2121 2828 3535 Trr μs Max 5 5 5 5 5 5 5 o IF (AV) Amps 55 C 5.0 5.0 5.0 5.0 5.0 5.0 5.0 o o o IF (AV) Amps o o IFSM Amps 1.5 1.5 1.5 1.5 1.5 1.5 1.5 150 150 150 150 150 150 150 IFRM Amps 75 75 75 75 75 75 75 VF Volts 25 C 1.1 2.2 2.2 3.3 3.3 4.4 5.5 5 5 5 5 5 5 5 o IR μA 100oC 50 50 50 50 50 50 50 100 C 125 C 25 C 55 C 100 C 3.5 3.5 3.5 3.5 3.5 3.5 3.5 2.0 2.0 2.0 2.0 2.0 2.0 2.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 SDA168 Package: NOTES: 1/ For Ordering Information, Price, and Availability- Contact Factory. 2/ Screened to MIL-PRF-19500. 3/ Unless Otherwise Specified, All Electrical Characteristics @25ºC. 4/ Recovery Conditions: IF = 0.5 Amp, IR = 1.0 Amp rec. to .25 Amp. 5/ Please consult factory for further details on these items. NOTE: All specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. DATA SHEET #: RA0031A DOC SDA168H thru SDA168N Solid State Devices, Inc. 14701 Firestone Blvd * La Mirada, Ca 90638 Phone: (562) 404-4474 * Fax: (562) 404-1773 ssdi@ssdi-power.com * www.ssdi-power.com SDA168H through SDA168N*: *For information on curves, contact the Factory Representative for Engineering Assistance. NOTE: All specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. DATA SHEET #: RA0031A DOC