SDA172HF

Solid State Devices, Inc. 14701 Firestone Blvd * La Mirada, CA 90638 Phone: (562) 404-4474 * Fax: (562) 404-1773 ssdi@ssdi-power.com * www.ssdi-power.com SDA172HF series 30 nsec 1.3 Amp Single Phase Bridge Rectifier Assembly FEATURES:         Reverse Recovery Time: 30 ns Max Average Output Current: 1.3 Amps PIV: 600 to 900 Volts Hermetically Sealed Internal Discretes Thermal Conductive Epoxy Encapsulated Surface or Radial Mounting* Available in Higher Voltages Available in Ultra Fast, Fast, and Standard Recovery Designer’s Data Sheet Part Number/Ordering Information SDA172 __ HF __ │ │ │ │ │ │ │ │ └ │ │ │ │ └ └ 1/ Screening 2/ __ = Not Screened TX = TX Level TXV = TXV Level S = S Level Reverse Recovery HF = Hyper Fast Family/Voltage J = 600 V K = 700 V L = 800 V M = 900 V *For surface mounting add -2 to part number. Peak Inverse Voltage (per leg) Average DC Output Current TC=Case Temp Reverse Recovery Time Peak Forward Surge Current (1 Cycle) Maximum Forward Voltage (per leg) @ 1.0 ADC Maximum Reverse Current (per leg) @ PIV Electrical Characteristics Part Number SDA172J SDA172J-2 SDA172K SDA172K-2 SDA172L SDA172L-2 SDA172M SDA172M-2 NOTES: HF HF HF HF Volts 600 700 800 900 50ºC Amps 1.3 1.3 1.3 1.3 100ºC Amps 1.0 1.0 1.0 1.0 Max ns 30 30 30 30 Amps 25 25 25 25 Volts 1.9 1.9 1.9 1.9 25ºC μA 10 10 10 10 100ºC μA 200 200 200 200 1/ For ordering information, price, and availability contact factory. 2/ Screening based on MIL-PRF-19500. Screening flows available on request. NOTE: All specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. DATA SHEET #: RA0103A DOC Solid State Devices, Inc. 14701 Firestone Blvd * La Mirada, CA 90638 Phone: (562) 404-4474 * Fax: (562) 404-1773 ssdi@ssdi-power.com * www.ssdi-power.com SDA172HF series SDA172J through SDA172M: *For information on curves, contact the Factory Representative for Engineering Assistance. Design Notes: Operating Temperature TOP -55 OC to +150 OC Reverse Recovery Time IF = 500mA, IR = 1.0 Amp, Irr = 250mA NOTE: All specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. DATA SHEET #: RA0103A DOC