SDA37DUF

SDA37AUF thru SDA37FUF Solid State Devices, Inc. 14701 Firestone Blvd * La Mirada, Ca 90638 Phone: (562) 404-4474 * Fax: (562) 404-1773 ssdi@ssdi-power.com * www.ssdi-power.com Designer’s Data Sheet Part Number/Ordering Information1/ SDA37 __ __ __ │ │ └ Screening 2/ ││ __ = Not Screened ││ TX = TX Level ││ TXV = TXV ││ S = S Level ││ │ └ Reverse Recovery UF = Ultra Fast │ │ └ Peak Inverse Voltage (per leg) A = 100V, B = 200V, C = 300V, D = 400V, E = 500V, F = 600V, • • • • • • • • • • 10 AMPS 100 ─ 600 VOLTS ULTRA FAST RECOVERY THREE PHASE BRIDGE RECTIFIER FEATURES: Ultra Fast Reverse Recovery Time 70 ns Max Average Output Current 10 Amps @ 50OC PIV 100 to 600 Volts Per Leg Efficient Thermal Design Glass Passivated Diode Cells Case Electrically Insulated Aluminum Case Available in Hyper Fast Recovery Times Available in Higher Voltages TX, TXV, and S-Level Screening Available ELECTRICAL CHARACTERISTICS3/ Part Number Peak Inverse Voltage (per leg) Sine Wave 4/ RMS Reverse Recovery Input Time Voltage Max. Average DC Output Current TC=Case Temp Average DC Output Current TA= Ambient Temp (no heat sink) Peak Forward Surge Current (1 Cycle) Peak Repetitive Forward Current Maximum Forward Voltage (per leg) @ 3 ADC Maximum Reverse Current (per leg) @ PIV Symbol Units Conditions SDA37AUF SDA37BUF SDA37CUF SDA37DUF SDA37EUF SDA37FUF PIV Volts 100 200 300 400 500 600 Vr Volts 70 140 210 280 350 420 Trr ns Max 70 70 70 70 70 70 o IF (AV) Amps 50 C 10 10 10 10 10 10 IF (AV) Amps o IFSM Amps o IFRM Amps 18 18 18 18 18 18 VF Volts 25 C o IR μA 100oC 500 500 500 500 500 500 20 20 20 20 20 20 100 C 7.0 7.0 7.0 7.0 7.0 7.0 25 C 3.0 3.0 3.0 3.0 3.0 3.0 o 55 C 2.2 2.2 2.2 2.2 2.2 2.2 75 75 75 75 75 75 1.35 1.35 1.35 1.35 1.35 1.35 SDA37 Package: NOTES: 1. For Ordering Information, Price, Outline, Curves, and Availability- Contact Factory. 2. Screening based on MIL-PRF-19500. Screening flows available on request. 3. Unless Otherwise Specified, All Electrical Characteristics @25ºC. 4. Recovery Conditions: IF = 0.5 Amp, IR = 1.0 Amp rec. to .25 Amp. NOTE: All specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. DATA SHEET #: RA0083A DOC