SDA382C

Solid State Devices, Inc. 14830 Valley View Blvd * La Mirada, Ca 90638 Phone: (562) 404-7855 * Fax: (562) 404-1773 ssdi@ssdi-power.com * www.ssdi-power.com SDA382A THRU SDA382G 10 AMPS, 50 - 70 nsec ULTRAFAST CENTERTAP RECTIFIER SDA382 DESIGNER’S DATA SHEET • • • • • • • • • Features: Ultrafast Recovery: 70 nsec maximum Unheatsunk Average Output Current: 10 Amps Low Reverse Leakage Current Low Junction Capacitance Glass Passivated Rectifiers Hermetically Sealed Discretes Aluminum Case for Maximum Thermal Conductivity Common Anode and Doubler Versions Available TX and TXV Level screening Available Maximum Ratings Symbol Value Units Peak Repetitive and Peak Surge Reverse Voltage SDA382A SDA382B SDA382C SDA382D SDA382E SDA382F SDA382G VRRM VRSM VR 50 100 200 400 600 800 1000 10 75 -55 to +150 5.0 Volts Average Rectified Forward Current 2 (Resistive Load, 60 hz Sine Wave, TA = 25°C, No Heatsink) Peak Surge Current 1 (8.3 ms Pulse, Half Sine Wave, TA = 25 °C, per leg) Operating & Storage Temperature Maximum Thermal Resistance Junction to Case 1/ Both legs tied together 2/ Per leg Io IFSM Top & Tstg RèJC Amps Amps ºC ºC/W NOTE: All specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. DATA SHEET #: RA0025B Solid State Devices, Inc. 14830 Valley View Blvd * La Mirada, Ca 90638 Phone: (562) 404-7855 * Fax: (562) 404-1773 ssdi@ssdi-power.com * www.ssdi-power.com SDA382A thru SDA382G Symbol Value Units Electrical Characteristics Instantaneous Forward Voltage Drop Instantaneous Forward Voltage Drop 1/ (IF = 3A, TA = 25°c, 300 – 500 µsec pulse) (IF = 3A, TA = 25°C, 300 - 500 µsec pulse) A-D 50-400V VF1 E 600V F – G 800-1000V A-D E F-G VF2 IR1 IR2 1.5 1.7 1.9 1.7 1.9 2.1 10 1 50 60 70 VDC VDC µA mA nsec Reverse Leakage Current (Rated VR, TA = 25ºC, 300 µsec pulse minimum) Reverse Leakage Current (Rated VR, TA = 100ºC, 300 µsec pulse minimum) Reverse Recovery Time (TA = 25°C, IF = 0.5A, IR = 1.0A, IRR = 0.25A) A-D E F-G TRR 1/ Guaranteed / not tested Case Outline: FOR OPERATING CURVES, PLEASE CONTACT THE FACTORY